New Equipment | Rework & Repair Equipment
Eyelets are made from copper and are tin electronplated unless specified. Chose the proper eyelet keeping the following in mind: LUF The length of the eyelet barrel under the flange should be 0.020-0.035”/0.630-0.890mm greater than the thickness of
Aside from function and ability, fashion also can be an option in the industrial machines. Including touch screen; with friendly human machine interface, bring you the instinct operation. We prepared three kinds of models, In-Line, Batch Off-Line, an
Electronics Forum | Fri May 31 09:13:12 EDT 2002 | russ
Jim, you are right in this. these connectors have long pins 1/2" or so that protrude through the board and are used for mating into a female connector on some other assembly. due to both length and "no solder allowed in contact area" criterias thes
Electronics Forum | Tue Sep 10 01:51:46 EDT 2002 | bentzen
Hi. The towel was red and white as the Japanese flag ! The issue was addressed to Fuji Japan and was handled there. Vision type 11 and 12 do not allow protruding nozzles, so for 0603 (1608) they can't be used. Regards Brian
Used SMT Equipment | Pick and Place/Feeders
YAMAHA placement machine-YS24 equipment parameters: 1. Target substrate: L50×W50mm～L700×W460mm 2. Mounting capacity: 72,000CPH (0.05sec/CHIP) 3. Mounting accuracy: ±0.05mm(μ+3σ), ±0.03mm(3σ) 4. Target
Used SMT Equipment | Pick and Place/Feeders
YAMAHA placement machine-YS24 equipment parameters: 1. Target substrate: L50×W50mm～L700×W460mm 2. Mounting capacity: 72,000CPH (0.05sec/CHIP) 3. Mounting accuracy: ±0.05mm(μ+3σ), ±0.03mm(3σ) 4. Target
Industry News | 2018-12-08 03:29:29.0
SMT Dictionary – Surface Mount Technology Acronym and Abbreviation
Industry News | 2008-08-14 14:51:51.0
Essemtec announces that it has developed a special twin vacuum table for its placement machine FLX2011-MKL that eases the handling of flex boards and film substrates and doubles productivity.
YAMAHA placement machine-YS24 equipment parameters: 1. Target substrate: L50×W50mm～L700×W460mm 2. Mounting capacity: 72,000CPH (0.05sec/CHIP) 3. Mounting accuracy: ±0.05mm(μ+3σ), ±0.03mm(3σ) 4. Target
YAMAHA placement machine-YS24 equipment parameters: 1. Target substrate: L50×W50mm～L700×W460mm 2. Mounting capacity: 72,000CPH (0.05sec/CHIP) 3. Mounting accuracy: ±0.05mm(μ+3σ), ±0.03mm(3σ) 4. Target
GPD Global | https://www.gpd-global.com/co_website/pdf/lead-former/CF8-Spring-Plunger-Replacement.pdf
) and install crank pin (PN 801- 1-12). 7. Center crank pin so ends of the pin do not protrude from edge of slide, and then install and tighten set screw. 8
| https://ipcapexexpo.org/exhibitors/event-rules-regulations
in the case of a distributor and/or manufacturer's representative). Signage and Graphics All signage and graphics must stay within the confines of the booth and not protrude into the aisles or into adjacent booths. Any portion of the exhibitor’s booth
