Industry Directory | Manufacturer
A manufacturer of flexible, high-performance surface mount technology (SMT) and advanced packaging technology (APT) assembly systems
Industry Directory | Manufacturer
Manufacturer of workbenches for the electronics industry.
ProntoPLACE used by electronics manufacturers will quickly program your surface mount SMT and thru-hole assembly equipment. In minutes Unisoft ProntoPLACE software translates CAD or Gerber and Bill of Materials (BOM) files into real reference desig
SMT pick & place/Stencil Printers/Reflow Systems
Electronics Forum | Fri Nov 29 08:36:07 EST 2002 | Jeff Park
They have there strong points and weak ones. I have worked with them for the last 5 years and have seen some flakey problems (Cables, feeders, encoders) that will cause you some down time but if you get a good price on a system it might be worth it.
Electronics Forum | Wed Nov 27 18:10:41 EST 2002 | andrewbrook
Quad4C's have their moments. If the price is right and you are aware of the machines limitations then you will be satisfied. The placement rate is slow, 1.2 seconds/chip. Don't buy any Quad if it has the CyberOptics Laser unit, the Quadalign unit is
Used SMT Equipment | AOI / Automated Optical Inspection
Operating System: Linux Details: • Inspection envelope 20” x 20” • Large format 5mp Color camera for01005 Inspection • Quad Color lighting • Telecentric, Look Down Optics • High speed precision stage with .05um Linear Encoder • System softwar
Used SMT Equipment | Pick and Place/Feeders
The APS-1 sustains fast, accurate placement alone or in-line. Its rigid frame gives you mechanical stability. Center-drive linear servomotors provide smooth, precise operation. The patented QuadAlign System optically aligns components and die on-the-
Industry News | 2015-08-24 14:59:01.0
MIRTEC, “The Global Leader in Inspection Technology,” announces that it will exhibit in Booth #407 at SMTA International, scheduled to take place Sep. 29-30, 2015 at the Donald Stephens Convention Center in Rosemont, IL. Company representatives will showcase the latest advancement MIRTEC’s award-winning 3D AOI and SPI systems during the two-day event.
Industry News | 2013-12-05 16:48:11.0
MIRTEC, “The Global Leader in Inspection Technology,” announces that it has been selected as a finalist for the 2014 Best in Test Awards in the Machine Vision/Inspection category for its MV-9 2D/3D CoaXPress In-Line AOI Series. Since 1991, the Best in Test Awards have recognized the best in test products and test professionals.
Parts & Supplies | Tape and Reel
Quad Systems C & Q series feeders from 8 mm. to 44 mm., vibratory and bases available at bargain prices. First come first served!
Technical Library | 2018-10-03 20:41:44.0
Voids in solder joints plague many electronics manufacturers. Do you have voids in your life? We have good news for you, there are many excellent ways to "Fill the Void." This paper is a continuation of previous work on voiding in which the following variables were studied: water soluble lead-free solder pastes, a variety of stencil designs, and reflow profiles. Quad Flat No-Lead (QFN) component thermal pads were used as the test vehicle. The voiding results were summarized and recommendations were made for reduction of voiding.
Technical Library | 2024-07-24 00:51:44.0
A blade server system (BSS) utilizes voltage regulator modules (VRMs), in the form of quad flat no-lead (QFN) devices, to provide power distribution to various components on the system board. Depending on the power requirements of the circuit, these VRMs can be mounted as single devices or banked together. In addition, the power density of the VRM can be high enough to warrant heat dissipation through the use of a heat sink. Typically, at field conditions (FCs), the BSS are powered on and off up to four times per day, with their ambient temperature cycling between 258C and 808C. This cyclical temperature gradient drives inelastic strain in the solder joints due to the coefficient of thermal expansion (CTE) mismatch between the QFN and the circuit card. In addition, the heat sink, coupled with the QFN and the circuit card, can induce additional inelastic solder joint strain, resulting in early solder joint fatigue failure. To understand the effect of the heat sink mounting, a FEM (finite element model of four QFNs mounted to a BSS circuit card was developed. The model was exercised to calculate the maximum strain energy in a critical joint due to cyclic strain, and the results were compared for a QFN with and without a heat sink. It was determined that the presence of the heat sink did contribute to higher strain energy and therefore could lead to earlier joint failure. Although the presence of the heat sink is required, careful design of the mounting should be employed to provide lateral slip, essentially decoupling the heat sink from the QFN joint strain. Details of the modeling and results, along with DIC (digital image correlation) measurements of heat sink lateral slip, are presented.
www.unisoft-cim.com/pcbplace.htm - The ProntoPLACE module from Unisoft is used by electronics manufacturers to generate the necessary programs for automatic PCB assembly machines in minutes. ProntoPLACE programs most popular surface mount (SMT) place
www.unisoft-cim.com/prontoaoi.htm - ProntoAOI software from Unisoft is used by electronic manufacturers to quickly program their Automatic Optical Inspection (AOI) machines and X-RAY Equipment. ProntoAOI programs most popular AOI Equipment such as
Career Center | San Antonio, Texas USA | Production
Contract manufacturer based in San Antonio, Texas has openings for SMT operators. 1st and 2nd shift positions available. Experience with Quad systems is helpful but not required.
Career Center | New Castle, Pennsylvania USA | Production
Surface Mount Tech - Printed Circuit Board (PCB) Summary: **All applicants must be familiar with: Quad 4C equipment*** Will be responsible for Surface Mount Parts and Screen Printing Other responsibilities may include: Moves controls to activate
Career Center | , | Engineering,Sales/Marketing,Technical Support
Applications Engineer with over 20 years of combined Manufacturing/Field Service/Applications Engineering experience in the SMT industry.
Career Center | Reno, Nevada USA | Engineering,Maintenance,Production,Quality Control,Research and Development,Sales/Marketing,Technical Support
Extensive technical background including tenures providing robotics technology expertise to diverse national and international clients and supporting surface mount technologies for printed circuit board (PCB) manufacturing processes. Results-oriente
| https://unisoft-cim.com/free.php
. Most machines are supported such as Assembleon / Philips, Mydata / Mycronic, Juki, ASM / Siemens, Universal, Fuji, Siemens, Contact Systems, Samsung, Quad, Europlacer, Sanyo, Sony, Panasonic, Mirae