Industry Directory | Manufacturer
Datapaq, founded in 1984, is the world leader in temperature profiling. Datapaq systems provide key information on the effectiveness of heat processing in the electronics assembly industry, using the most advanced and tested techniques.
Industry Directory | Manufacturer
Sikama International designs, develops, manufactures and markets reflow solder furnaces/curing systems, featuring our patented conduction+convection heating and cooling technology. Our furnaces are designed for efficient use of power and gas.
Convection Reflow Oven The World's Best Convection Reflow Oven for High-Throughput The New reflow oven platform revolutionizes the Convection Reflow Oven / Reflow Soldering industry with several new and ground breaking designs! The MK7 convecti
New Equipment | Test Equipment
slim kic 2000 Specifications: KIC 2000 Profiler * 9 Channels Slim Kit KIC 2000 Profiler * 9 Channels * Full Original Package, with original Thermal Couples, Protective Shield, Software, etc * Technical Support and Warranty from USA * Thermal Pr
Electronics Forum | Tue Feb 19 09:24:25 EST 2019 | cyber_wolf
Reflow profiles are based on the product and materials you are soldering. You need profiling software and a data logger.
Electronics Forum | Tue Feb 19 10:50:13 EST 2019 | rgduval
Call Heller directly, and give them the oven, and relative thermal density of the board, as well as the solder paste that you're using. They'll be able to give you a baseline profile to start from (both RTS and RSS). Otherwise, use a thermocouple p
Used SMT Equipment | Soldering - Reflow
Gen5 Waterless Cooling and Flux Separation System – Heated Cooling Module in 1st Cooling Zone for Controlling Cooling Slope – Enhanced Waterless Cooling Modules for Low Product Exit Temperature. Complete Computer Control System including: Flat Panel
Used SMT Equipment | Soldering - Reflow
Heating zones: 5 Cooling zones: 2 Total heating length: 66 in. Total cooling length: 26 in. Total process length: 127 in. Total on /off load length: 11 in. Overall system length: 138.5 in. Overall system width: 52 in. Overall system height: 5
Industry News | 2017-04-24 19:04:48.0
This year, MIRTEC will launch several new inspection machines equipped new cutting-edge technologies. MIRTEC is proud to be promoting these new machines in booth #1J10 at NEPCON China 2017, one of the biggest technical exhibitions of SMT and EMA, from April 25-27 at the Shanghai World EXPO Exhibition & Convention Center. MIRTEC’s new machines have been developed under a concept, ‘Perfect Inspection Solution’. This is an inspection concept involving the combination of 3D, 2D, and side-camera inspection.
Industry News | 2024-04-29 20:23:24.0
Precision PCB Services, Inc. introduces their new Industrial PC controlled BGA Rework Station.
Parts & Supplies | Assembly Accessories
KIC START profiler,kic thermal profile,smt thermal profilling Image Reflow Profile 9 6 Channel Tester Accuracy: +/-1.2°C Resolution: 0.3 °C to 0.1 °C Internal operating temperature: 0 °C to 105 °C For thermocouples: 9/12 K Ty
Parts & Supplies | Assembly Accessories
Detailed Product Description Features: 7 Channel Brand: KIC Part Name: X5 Reflow Profiler Model: X5 Condition: Original New Leadtime: 7days KIC X5 Thermal Profiler with SPC software and RF capability For Reflow Track More Data Points With 7,
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Technical Library | 2019-06-07 14:49:54.0
ACI Technologies was contacted in regards to poor solder joint reliability. The customer submitted an assembly that was exhibiting intermittent opens at multiple locations on a ball grid array (BGA) component. The assembly’s functionality did not survive international shipping, essentially shock and vibration failures, immediately making the quality of the solder joints suspect. The customer was asked about the contract manufacturer and the reflow oven profile as well as the solder paste and surface finish used. The ACI engineering staff evaluated the contract manufacturer’s technique and determined that they were competent in the methods they used for placing thermocouples in the proper locations and developing the reflow oven profile. The surface finish was unusual, but not unheard of, in that it was hard gold over hard nickel, rather than electroless nickel immersion gold (ENIG). The customer was able to supply boundary scan testing data which showed a diagonal row of troublesome BGA pins.
slim kic 2000 Specifications: KIC 2000 Profiler * 9 Channels Slim Kit KIC 2000 Profiler * 9 Channels * Full Original Package, with original Thermal Couples, Protective Shield, Software, etc * Technical Support and Warranty from USA * Thermal Pr
SLIM KIC 2000 SPECIFICATIONS: KIC 2000 Profiler * 9 Channels Slim Kit KIC 2000 Profiler * 9 Channels * Full Original Package, with original Thermal Couples, Protective Shield, Software, etc * Technical Support and Warranty from USA * Thermal Pr
Career Center | Delavan, Wisconsin USA | Production
*Set up printers, placement machines and reflow ovens for production. *Adjust machine parameters and CAM programs *Optimize part placement and feeder applications through CAM programs *Manipulate SPC data for solder paste height measrurements and int
Career Center | , Alabama Saudi Arabia | Engineering,Production,Research and Development
SNR MANUFACTURING ENGINEER WANTED Design Change Management and New product Introduction. Solder paste printing process (knowledge of Fuji screen printer machines. Stencil design/ modification and the use of Gerber data. SMT placement machines (Kno
Career Center | Mumbai, India | Maintenance,Management,Production,Technical Support
SMT Manufacturing, MYDATA/ Mycronic Machine Experience, SMT Production Execution, SMT Machine Maintainance Planning & Execution
Career Center | , Israel | Engineering,Maintenance,Technical Support
I was born on June , 1972 in Khmelnitsky city , Ukraine . I am male. From 1979 to 1987 I was studying at secondary school #7, having finished which I entered the Technical College of Khmelnitsky in specialty Machine Tools with Computer Numeric Contr
INSERT INTO tracking_express (userid, username, page_id, ts) VALUES ('#Quser_profile.id#', '#Quser_profile.username#', 14, (#ts#)) SMT Express, Volume 2, Issue No. 4 - from SMTnet.com Volume 2, Issue No. 4 Wednesday, April 19, 2000
KingFei SMT Tech | https://www.smtspare-parts.com/sale-11936272-kic-start-thermal-profile-smt-thermal-profilling-image-reflow-profile-9-6-channel-tester.html
KIC START Thermal Profile , SMT Thermal Profilling Reflow Profile 9 6 Channel Tester Leave a Message We will call you back soon
| http://etasmt.com/cc?ID=te_news_industry,24565&url=_print
How to optimize the reflow profile?-SMT Technical-Reflow oven,SMT Reflow Soldering Oven-cmsadmin Reflow oven,SMT Reflow Soldering Oven 当前位置: Home >> News
