Industry Directory | Consultant / Service Provider / Manufacturer / Other
Masach Tech specializes in board level EMI/RFI shielding design and production. Founded in 1994, Masach is a globally recognized and leading supplier of some of the world’s largest electronic companies, driven by highest quality..
Industry Directory | Consultant / Service Provider / Manufacturer
SolderStar produce thermal profiler solutions for reflow soldering, selective solder machine profiling and wave solder optimization.
- Flexible uses for all different kinds of Components like SMD, BGA, CBGA, CCGA, CSP, QFN, MLF, PGA and All Epoxy undefiled BGA .. etc . - Recommended for reworking All Plastic parts, PTH, Sockets, Connectors and Metal Shields . - Complete reworking
New Equipment | Rework & Repair Equipment
Cost Effective Rework of Medium Size Boards The FINEPLACER® coreplus is a compact, yet versatile rework system that offers a level of professionalism that exceeds its attractive price. The system offers proven rework technology for a wide spectrum
Electronics Forum | Thu May 01 11:56:04 EDT 2008 | realchunks
It sounds like this part is floating on your solder joint during reflow. You may need to redesign your pad geometry. In general with this type of clip - smaller pads are better. If you cannotcahnge pad size, try changing the openings on your stenc
Electronics Forum | Thu May 01 08:35:11 EDT 2008 | cyber_wolf
We are having issues with these parts tilting to one side during reflow. Of course when they are tilted, they have to be reworked because the shield won't fit on. Changing board design and part design is not an option.... I think there are 2 reasons
Used SMT Equipment | Pick and Place/Feeders
Streamline your odd form assembly The Polaris Assembly Cell configured with Servo-gripper tooling streamlines your manufacturing process by automating reflow odd form assembly, wave solder odd form assembly, or final product assembly. Specialized
Industry News | 2016-04-20 10:27:40.0
BEST, Inc. was presented Circuit Assembly’s NPI Award for its HeatShield Gel™ high temperature shielding product at the IPC APEX Expo on Feb. 24 in San Diego, Calif.
Industry News | 2016-01-05 16:10:10.0
Novel method for protecting electronic components from heat.
Parts & Supplies | Assembly Accessories
KIC START2 PROFILER Specifications: KIC Start 2 Profiler * Replacement of KIC Start * Stainless Steel Thermal Shield * 6 Channels (Standard Type K TC connectors) KIC Start 2 Thermal Profiler KIC K2 thermal profiler,smt reflow oven therma prof
Parts & Supplies | Assembly Accessories
Part Name: KIC Explorer Model: KIC Explorer Brand: KIC Accuracy: +/-0.5 Deg.C Temperature Range: Can Up To 350-400 Deg.C Size: 320*86*26（mm） SMT thermal profiler KIC explorer,Reflow oven checker kic profiler KIC Explorer * Replacement for KIC
Technical Library | 2020-11-24 23:01:04.0
The miniaturization trend is driving industry to adopting low standoff components or components in cavity. The cost reduction pressure is pushing telecommunication industry to combine assembly of components and electromagnetic shield in one single reflow process. As a result, the flux outgassing/drying is getting very difficult for devices due to poor venting channel. This resulted in insufficiently dried/burnt-off flux residue. For a properly formulated flux, the remaining flux activity posed no issue in a dried flux residue for no-clean process. However, when venting channel is blocked, not only solvents remain, but also activators could not be burnt off. The presence of solvents allows mobility of active ingredients and the associated corrosion, thus poses a major threat to the reliability. In this work, a new halogen-free no-clean SnAgCu solder paste, 33-76-1, has been developed. This solder paste exhibited SIR value above the IPC spec 100 MΩ without any dendrite formation, even with a wet flux residue on the comb pattern. The wet flux residue was caused by covering the comb pattern with 10 mm × 10 mm glass slide during reflow and SIR testing in order to mimic the poorly vented low standoff components. The paste 33-76-1 also showed very good SMT assembly performance, including voiding of QFN and HIP resistance. The wetting ability of paste 33-76-1 was very good under nitrogen. For air reflow, 33-76-1 still matched paste C which is widely accepted by industry for air reflow process. The above good performance on both non-corrosivity with wet flux residue and robust SMT process can only be accomplished through a breakthrough in flux technology.
Technical Library | 2023-11-14 19:24:08.0
In PCB circuit assemblies the trend is moving to more SMD components with finer pitch connections. The majority of the assemblies still have a small amount of through hole (THT) components. Some of them can't withstand high reflow temperatures, while others are there because of their mechanical robustness. In automotive applications these THT components are also present. Many products for cars, including steering units, radio and navigation, and air compressors also use THT technology to connect board-to-board, PCB's to metal shields or housings out of plastic or even aluminium. This is not a simple 2D plain soldering technology, as it requires handling, efficient thermal heating and handling of heavy (up to 10 kg) parts. Soldering technology becomes more 3D where connections have to be made on different levels. For this technology robots using solder wire fail because of the spattering of the flux in the wires and the long cycle time. In wave soldering using pallets the wave height is limited and pin in paste reflow is only a 2D application with space limitations.
slim kic 2000 Specifications: KIC 2000 Profiler * 9 Channels Slim Kit KIC 2000 Profiler * 9 Channels * Full Original Package, with original Thermal Couples, Protective Shield, Software, etc * Technical Support and Warranty from USA * Thermal Pr
SLIM KIC 2000 SPECIFICATIONS: KIC 2000 Profiler * 9 Channels Slim Kit KIC 2000 Profiler * 9 Channels * Full Original Package, with original Thermal Couples, Protective Shield, Software, etc * Technical Support and Warranty from USA * Thermal Pr
SMTnet Express, February 27, 2020, Subscribers: 34,359, Companies: 10,970, Users: 25,651 Dispensing EMI Shielding Materials: An Alternative to Sputtering Credits: Nordson ASYMTEK Shielding electronic systems against electromagnetic interference
| https://www.wesource.com/miscellaneous/hoffman-rf-shield-box-15.5x12.5x7-id-60467/
Hoffman RF Shield Box ~15.5x12.5x7_ID 60467: World Equipment Source COMPANY PROFILE FINDER'S PROGRAM R1-Surplus Wesource159 CALL US: 858.693.1991 Home About Us Contact Us Categories AOI Assembleon Machines Assembleon Parts Batch Ovens and Chambers Component Counters/Tapers Component Placers
KingFei SMT Tech | http://www.smtspare-parts.com/quality-11936524-smt-thermal-profiler-kic-explorer-reflow-oven-checker-kic-profiler
SMT Thermal Profiler KIC Explorer , Reflow Oven Checker Kic Profiler Leave a Message We will call you back soon! Your message must be between 20-3,000 characters
