Industry Directory | Manufacturer
Nihon has been a leader in soldering and brazing since 1966. Nihon manufactures SMT solder joining materials e.g. lead-free solder (SN100C:Sn-Cu-Ni-Ge etc): solder paste, solder spheres, flux cored solder wire, solder bar, etc.
Tiger International(Shanghai)Co.lTD-RiZhao office is one of the largest buyer of non ferrous metal scrap and minerals, esp NiSn scrap,Sn scrap.
New Equipment | Solder Materials
High Reliability Lead-Free Solder Spheres SN100C. eBall Selection: Impact Strength SN100C (Sn-Cu-Ni+Ge) Solder spheres with excellent impact strength, suitable for BGA, CSP, MCM and high density fine pitch
Electronics Forum | Mon Jul 16 16:39:17 EDT 2007 | davef
We doubt that entrapped process chemicals cause under-etch. Over-etch maybe, but not under-etch Under-etch is an indicator of improper process control/improper chemistry during etching. Under-etch can result in bridging between traces, resulting in
Electronics Forum | Tue Jun 27 08:38:03 EDT 2006 | cuculi54986@yahoo.com
I tried some SN100C from AIM... On only one array. It flowed well on the chips but did not like the finish on the SOT23's on the board. I did not have enough arrays to mess around, so we switched it over to SAC305 and had no issues. I'm guessing w
Used SMT Equipment | Soldering - Wave
Electrovert Econopak Plus Lead Free Wave Solder; Model: EPK+ 400/F; SN: MO940811001; Date: 10/1994; 440VAC 3-Phase 32.9 KVA; Full of Indium Sn95.5Ag3.8Cu7 Lead Free Solder; Chip & Lambda Wave; (2) Bottom Side I/R Preheaters; (1) Topside I/R Preheater
Used SMT Equipment | Soldering - Wave
The following Ersa N-Wave 330 has 2 full solder pots and various spares. It is included in the Manroland Online Auction scheduled for August 27-28 on www.xlineassets.com. This system will be sold to the highest bidder and is current just decommission
Industry News | 2021-02-05 09:31:21.0
The SMTA is pleased to announce the Best Papers from SMTA International 2020. The winners were selected by members of the conference technical committee. For these exceptional achievements, a cash award and plaque are given to primary authors of all winning papers.
Industry News | 2003-03-03 08:48:54.0
The International Conference on Lead-Free Electronics on June 10-13, 2003, in Brussels, Belgium.
Parts & Supplies | Assembly Accessories
The product description YG12 head Z axis servo controller control board YAMAHA YG12 head IO board Z axis servo board YS12 head Z axis servo board head servo controller, Z axis servo control board YAMAHA YG12 head Z axis servo board head Z axis servo
Parts & Supplies | Pick and Place/Feeders
JUKI screw SM1030601-SN-M ZK Electronic Technology Co.,Limited becky@hysmt.cn skype:beckysmt wechat:15323874439
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Technical Library | 2019-01-09 19:19:52.0
The electronics industry has widely adopted Sn-3.0Ag-0.5Cu solder alloys for lead-free reflow soldering applications and tin-copper based alloys for wave soldering applications. In automated soldering or rework operations, users may work with Sn-Ag-Cu or Sn-Cu based alloys. One of the challenges with these types of lead-free alloys for automated / hand soldering operations, is that the life of the soldering iron tips will shorten drastically using lead-free solders with an increased cost of soldering iron tool maintenance/ tip replacement. Development was done on a new lead-free low silver solder rework alloy (Sn-0.3Ag-0.7Cu-0.04Co) in comparison with a number of alternative lead-free alloys including Sn-0.3Ag-0.7Cu, Sn-0.7Cu and Sn-3.0Ag-0.5Cu and tin-lead Sn40Pb solder in soldering evaluations.
A Sustainable Alternative - Humitector cards are halogen-free and cobalt dichloride free. Visit https://www.clariant.com/solutions/products/2017/10/31/00/12/humitector-type-2-nonreversible-humidity-indicator-card?utm_source=CLRYouTube&utm_medium=Vi
we have many hitachi equipment and hitachi feeders to sell . if you want to know more , please contact us tina@smtfeeders.cn
Career Center | , District of Columbia | Engineering,Management,Production,Sales/Marketing
• Strong technical leadership and decision-making skills; strong verbal and written communication skills to provide clear, crisp direction for key issue resolution; and good team skills to facilitate cross-functional cross -site team effectiveness.
Career Center | Phoenix, Arizona | Engineering,Management,Production,Quality Control,Research and Development,Sales/Marketing,Technical Support
• Highly motivated, solution oriented professional with proven record synergizing scientific, engineering, and business administration backgrounds to drive and sustain customer satisfaction and long term improvements. • Articulate communicator that a
widely adopted Sn-3.0Ag-0.5Cu solder alloys for
SMTnet Express, June 20, 2019, Subscribers: 32,068, Companies: 10,815, Users: 24,854 Dissolution in Service of the Copper Substrate of Solder Joints Credits: Nihon Superior Co., Ltd. It is well known that during service the layer of Cu6Sn5
| http://www.feedersupplier.com/sale-29309523-00306432-02-smt-spare-part-asm-siemens-bero-3rg4-5mm-sn-1-5mm-1s.html
00306432-02 SMT Spare Part ASM SIEMENS Bero 3RG4 5MM SN-1 5MM 1S Leave a Message We will call you back soon! Your message must be between 20-3,000 characters
KD Electronics Ltd. | http://www.kundasmt.com/a/PRODUCTS/PRODUCTSB/PARTS_ID/5649.html
N510026266AA_Suzhou Feierte electronic co.,ltd Categories HOME ABOUT US SURFACE MOUNT SYSTEM ASM EQUIPMENT Equipment Accessories PANASONIC EQUIPMENT Equipment Accessories YAMAHA EQUIPMENT Equipment Accessories FUJI EQUIPMENT Equipment
