Electronics Forum | Thu Feb 13 07:13:39 EST 2003 | davef
Tell us more about the location of the bridging [ie, front-to-back, back-to-back, front-to-front, etc]. Thoughts are: * Your annular ring around the hole seems large. You have 0.007", consider 0.003" to be the minimum. Your board fabricator can gi
Electronics Forum | Tue Aug 02 22:49:55 EDT 2005 | davef
IPC-A-610D Section 5, shows a variety of photographs of: * Good lead-free solder connections * Lead-free soldering anomalies Hot Tear / Shrink Hole is one such anomaly. This shrinkage effect appears primarily on wave-soldered joints, but can also
Used SMT Equipment | Soldering - Reflow
2 QUAD Profile S Reflow Ovens Model: PRO-S-5-C Serial Number: 9804799 This is 2 reflow ovens for $8000.00. One is operational and the other is a complete machine but not operational and can be used for parts. One machine was fully operational
Used SMT Equipment | Other Equipment
High Speed Cream Solder Mixer (1) This machine main control in part by the microcomputer with the control software to achieve high control precision, speed, anti-interference ability, to ensure the machine's control performance. (2) This machine di
Industry News | 2003-06-10 08:16:44.0
The following text describes the application of NWA Quality Analyst to quality control in the assembly of electronic components.
Industry News | 2015-09-03 16:37:18.0
SMTA China announces that it presented awards for seven papers at the SMTA China South 2015 Conference Award Presentation Ceremony, held on Tuesday, August 25, 2015 at Shenzhen Convention & Exhibition Center in conjunction with the SMTA China Annual Award Ceremony.
Technical Library | 2016-08-24 06:15:35.0
From consumer electronics to systems control, automotive technology to aviation and aerospace – today, electronics are absolutely essential in many sectors. They increasingly replace mechanical components, eliminating wear and tear and thereby extending the service life. What is easily forgotten in this regard is that electronics are also subject to the laws of mechanics. Mechanical test equipment is crucial to test components for the secure hold of welded, soldered or adhesive bonds. A new, mechanically intricate test probe with universal clamping jaws, that can even grasp the individual bonding wires, is in line with the trend toward ever smaller components. Serving as an actuator for these is a micro drive that can be precisely controlled using a miniaturised motion controller to relieve the control unit in the test device.
Technical Library | 2007-10-18 13:42:45.0
To successfully achieve lead-free electronics assembly, each participant in the manufacturing process, from purchasing to engineering to maintenance to Quality/Inspection, must have a solid understanding of the changes required of them. This pertains to considerations regarding design, components, PWBs, solder alloys, fluxe s, printing, reflow, wave soldering, rework, cleaning, equipment wear & tear and inspection.
Events Calendar | Mon Mar 16 00:00:00 EDT 2020 - Mon Mar 16 00:00:00 EDT 2020 | ,
BGA & Area Array Failures, Causes & Corrective Actions Online Webinar
Career Center | Seven Hills, Ohio USA | Engineering,Production
The qualified candidate will be responsible for the operation and progamming of pick and place machines. This will include operating screen printing equipment set-up of reflow and cleaning systems and tear down of said systems. Hand soldering of in
Career Center | Seven Hills, Ohio USA | Engineering,Production
The qualified candidate will be responsible for the operation and progamming of pick and place machines. This will include operating screen printing equipment set-up of reflow and cleaning systems and tear down of said systems. Hand soldering of in
Career Center | Columbus, Ohio USA | Engineering,Management,Production,Quality Control,Research and Development,Technical Support
20 plus years of experience in a Electronics Manufacturing environment. Management experience on 1st and 2nd shift with groups up to 18 in a goverment contracted environment Experienced internal/lead auditor of ISO 9001 with years of audit experi
Career Center | Columbus, Ohio USA | Engineering,Management,Production,Quality Control,Research and Development,Technical Support
20 plus years of experience in a Electronics Manufacturing environment. Management experience on 1st and 2nd shift with groups up to 18 in a goverment contracted environment Experienced internal/lead auditor of ISO 9001 with years of audit experi
Surface Mount Technology Association (SMTA) | https://www.smta.org/smtai/exhibitor_info.cfm
#528 AGI Corporation #934 AIM Solder #423 Akrometrix LLC #923 Allfavor Technology #735 America Tape and Reel #427 American Standard Circuits, Inc
| https://www.smtfactory.com/I-C-T-P12-High-Precision-Semi-Automatic-SMT-Screen-Stencil-Printer-in-SMD-Assembly-Line-pd47448364.html
the correct solder paste consistency, and regular inspections for wear and tear. Detailed maintenance instructions can be found in the machine's user manual. 6. Can this printer handle lead-free solder paste? Yes, most Semi-Automatic SMT Screen Stencil