New Equipment | Education/Training
IPC J-STD 001 REV F Requirements for Soldered Electrical and Electronic Assemblies. The IPC J-STD-001F standard is the industry-consensus document with respect to the assembly of PCBs and electronic assemblies. Released August 2014. IPC J-STD-001
New Equipment | Soldering - Other
IPC J-STD 001 REV G Requirements for Soldered Electrical and Electronic Assemblies. The IPC J-STD-001F standard is the industry-consensus document with respect to the assembly of PCBs and electronic assemblies. Released October 2017. IPC J-ST
Electronics Forum | Thu Nov 29 22:51:18 EST 2018 | jandon
IPC J-STD-001F: 6.2.1 Solder Application: Solder shall (N1D1D3) only be applied to the one side of a PTH except for intrusive soldering. Heat may be simultaneously applied to the both sides of the PTH.
Electronics Forum | Tue Jan 10 16:01:20 EST 2017 | davef
A review document for J-STD-001F with Amendment 1 had the following wording, but you should check the actual document to be sure of correctness 4.2 Facilities Cleanliness and ambient environments in all work areas shall [D1D2D3] be maintained at le
Industry News | 2016-01-17 19:26:58.0
In order to keep up with industry demand, IPC has released amendments for J-STD-001F, Requirements for Soldered Electrical and Electronic Assemblies, and IPC-A-610F, Acceptability of Electronic Assemblies. For each standard, IPC-A-610F Amendment 1 and IPC J-STD-001F Amendment 1 represents a critical shift to deliver necessary updates to these already robust standards.
Industry News | 2016-05-16 21:08:36.0
Two of IPCs most popular documents, IPC-A-610F and IPC J-STD-001F can now be obtained in an additional format per the request of some IPC members. This notice is to introduce the new format to IPC customers.
Teresa Rowe, IPC director of assembly standards, highlights several revisions to IPC J-STD-001F, Requirements for Soldered Electrical and Electronic Assemblies and IPC-A-610F, Acceptability of Electronic Assemblies. The documents have been updated to
The IPC-A-610 version "F" standard was released in August of 2014. This document can be purchased from the soldertools.net shopping site at http://www.soldertools.net/ipc-j-std-001f-standard-revision-f/ or Amazon at http://www.amazon.com/dp/B00RPSRDI
Training Courses | | | IPC J-STD-001 Trainer (CIT) Recert.
The Certified IPC J-STD-001 Trainer (CIT) recertification courses are intended for those individuals who were previously accredited to provide Certified IPC J-STD-001 (CIS) training.
Training Courses | | | IPC J-STD-001 Trainer (CIT)
The Certified IPC J-STD-001 Trainer (CIT) courses prepare individuals as qualified trainers in the area of producing high quality soldered interconnections and prepares them to deliver Certified IPC J-STD-001 Specialist (CIS) training.
SMTnet Express, January 14, 2016, Subscribers: 23,987, Members: Companies: 14,894, Users: 39,724 Now Available: Amendments for J-STD-001F and IPC-A-610F In order to keep up with industry demand, IPC has released
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/RSS_terminology_topic1994.xml
. Recently I was asked if that met the requirements of J-STD-001F. After reading through both I saw on page 1 of IPC7351B : "1.1 Purpose The intent of the information presented herein is to provide the appropriate size, shape and tolerance of surface mount land patterns to insure sufficient area for the appropriate solder
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/asymtek/your-process/applications-corner/bubbles-and-conformal-coating
. Joint Industry Standard IPC J-STD-001F – Requirements for Soldered Electrical and Electronic Assemblies When bubbles or voids are present and do not meet the void criteria, they shall be considered process indicators
