Industry Directory | Manufacturer
We are manufacturers and exporters of SMT Glue, Conformal Coating, Thermal Conductive Grease ans adhesives, RTV compounds and cleaning chemicals.
Industry Directory | Manufacturer
Manufactures and Provides: thermal interface materials (TIM) including insulated-metal-substrates, gap-filling compressible phase-change pads, thermal gels-greases,(EMI/RFI) mitigation conductive gaskets and other products.
We are well versed in the following thermal application materials: Sil-Pad thermally conductive insulators Gap-Pad thermally conductive gap filling material Q-Pad thermal grease replacement film Bond-Ply thermally conductive adh
The DV-8000C series Heli-Flow® pumps are the newest generation of encoded auger pumps. The pump has a fixed-head design for luer needle applications. The DV-8000 pump's rigid head and fluid path can withstand high pressures generated by thick fluids
Electronics Forum | Mon Aug 16 05:09:30 EDT 1999 | Charles Stringer
Atlthough not strictly surface mount, I am sure that amongst the experienced players out there someone will have some answers for me. Does anyone have any experience of "phase change" heatsink materials. These are solid at room temperature and then t
Electronics Forum | Wed Aug 18 13:54:01 EDT 1999 | John Thorup
| Atlthough not strictly surface mount, I am sure that amongst the experienced players out there someone will have some answers for me. | Does anyone have any experience of "phase change" heatsink materials. These are solid at room temperature and th
Used SMT Equipment | Adhesive Dispensers
Good working condition
Used SMT Equipment | Other Equipment
I have 2 Used working DEK 248 printers For Sale, they are working units. We use them for paste, but other ones we have re-purposed for Masking, Thermal Grease and at one time Thick Film. They are very good for fine pitch paste printing repeatabili
Industry News | 2011-01-12 17:48:44.0
GPD Global will highlight its Positive Cavity Displacement (PCD) Dispensing in Booth #6111 at the upcoming Automation and Technology West Expo (ATX), scheduled to take place February 8-10, 2011 at the Anaheim Convention Center in Anaheim, CA.
Industry News | 2011-02-04 01:47:14.0
GPD Global will highlight its Positive Cavity Displacement (PCD) Dispensing at the upcoming SMTA Dallas Expo & Tech Forum, scheduled to take place Tuesday, March 1, 2011 at the Richardson Civic Center in Richardson, TX.
Parts & Supplies | Pick and Place/Feeders
label feeder for Yamaha YV,YS,SMT label feeder for logo Continuous work 72 hours without exception We have full range of SMT pick and place machine feeders, for FUJI,JUKI,SAMSUNG,YAMAHA,PANASONIC and so on,including pneumatic feeder,electric feed
Parts & Supplies | Chipshooters / Chip Mounters
> JUKI ESL13000000 VACUUM PAD 15 JUKI ESL13000100 PHOTO MICRO SENSOR A JUKI ESL13001000 TUBE union (KL700) JUKI ESL130011A0 CONVEYOR MOTOR (KZ500) JUKI ESL13002000 CLAMP LEVER JUKI ESL13003000 T TYPE NUT JUKI ESL130031A0 OPERATION PANEL (KL700) JUKI
Technical Library | 2020-09-30 19:26:45.0
Introduction •Market trend: Smaller, more efficient, more powerful, run faster •ICs and other sophisticated electronic components typically operate efficiently only under a certain range of temperatures •Operational temperatures must be kept within a suitable range • Excessive heat can damage performance and can even cause system failure
Technical Library | 2019-09-24 15:41:53.0
This paper focuses on three different coating material groups which were formulated to operate under high thermal stress and are applied at printed circuit board manufacturing level. While used for principally different applications, these coatings have in common that they can be key to a successful thermal management concept especially in e-mobility and lighting applications. The coatings consist of: Specialty (green transparent) liquid photoimageable solder masks (LPiSM) compatible with long-term thermal storage/stress in excess of 150°C. Combined with the appropriate high-temperature base material, and along with a suitable copper pre-treatment, these solder resists are capable of fulfilling higher thermal demands. In this context, long-term storage tests as well as temperature cycling tests were conducted. Moreover, the effect of various Cu pre-treatment methods on the adhesion of the solder masks was examined following 150, 175 and 200°C ageing processes. For this purpose, test panels were conditioned for 2000 hours at the respective temperatures and were submitted to a cross-cut test every 500 h. Within this test set-up, it was found that a multi-level chemical pre-treatment gives significantly better adhesion results, in particular at 175°C and 200°C, compared with a pre-treatment by brush or pumice brush. Also, breakdown voltage as well as tracking resistance were investigated. For an application in LED technology, the light reflectivity and white colour stability of the printed circuit board are of major importance, especially when high-power LEDs are used which can generate larger amounts of heat. For this reason, a very high coverage power and an intense white colour with high reflectivity values are essential for white solder masks. These "ultra-white" and largely non-yellowing LPiSM need to be able to withstand specific thermal loads, especially in combination with high-power LED lighting applications. The topic of thermal performance of coatings for electronics will also be discussed in view of printed heatsink paste (HSP) and thermal interface paste (TIP) coatings which are used for a growing number of applications. They are processed at the printed circuit board manufacturing level for thermal-coupling and heat-spreading purposes in various thermal management-sensitive fields, especially in the automotive and LED lighting industries. Besides giving an overview of the principle functionality, it will be discussed what makes these ceramic-filled epoxy- or silicone-based materials special compared to using "thermal greases" and "thermal pads" for heat dissipation purposes.
Precise lines are dispensed to fill an area on a heat sink. At the end of this video, you can see a demo of placing a glass slide on top of the dispensed material to see uniformity of the area. http://www.nordsonasymtek.com
ORION Industries | http://orionindustries.com/thermal.php
thermal grease replacement film Bond-Ply® thermally conductive adhesives Hi-Flow® thermally conductive phase change material Orion Industries is capable of producing the entire catalog of standard parts, in a range of thicknesses from 0.004" to 0.25" thick
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/efd/products/thermal-compounds?con=t&page=2
Silicone-Free Thermal Interface Material. Thermal Compound 52034 synthetic non-silicone thermal grease solves the problems of contamination and migration associated with silicone-based products
