Industry Directory | Equipment Dealer / Broker / Auctions
BAJA Bid was founded to form an auction organization with the primary objective of providing an outstanding experience for both our buyers and sellers.
Industry Directory | Equipment Dealer / Broker / Auctions / Manufacturer
Focusing on the SMT field for more than 18 years, kinds of smt spare parts,like feeder ,nozzles,motors,fitlers and smt machine,juki ,panasonic ,yamaha,siemens,samsung(hanhua) ; peripheral equipment ,conveyor,AOI,spi,reflow oven
Flux Free Formic Reflow Reflow in Formic Acid Vapor Heller has designed and built an production ready horizontal reflow oven for formic acid vapor. This new oven has been designed to meet Semi S2/S8 safety standards (including toxic gases). Form
Retrofit existing system with Innovative Dispensing Technology for Excellent Dispense Control and Repeatability Advanced pump technologies available for retrofitting include: True Volumetric Pump, Precision Auger Pump, Simplified Jetting Pump and Ti
Electronics Forum | Wed May 09 17:13:06 EDT 2007 | zanolli
Re: 63/37 paste reflow Is there a standard reccomended time (ball park) above liquidus? What are the negative ramifications if the TAL is too short or too long? Thanks in advance
Electronics Forum | Thu May 10 08:09:52 EDT 2007 | davef
There is no standard for time above liquidus. It is described rather broadly by the solder paste supplier. Reflow Zone: If the temperature is too high, boards may char or burn. If the temperature is too low, cold and grainy solder joints will resul
Used SMT Equipment | Soldering - Reflow
HEXI, Lead-Free reflow soldering machine, type RFN1020/N, s.n. 0611018, Left to Right, with 10 heating heads plus cooling head, lenght of heating zones 3365mm,max width of PCB 450 mm, width of conveyor 50 to 450 mm, height of conveyor 920 +/_ 20 mm,
Used SMT Equipment | AOI / Automated Optical Inspection
Capture on the fly technology 3D Fusion Lighting (RGB+White LED's) 5 megapixel color imaging 2 top-down and 4 side angle cameras Quick set-up High speed, high defect coverage Low false failure rate Programmable conveyor for boards up to 20 x 2
Industry News | 2016-06-22 15:33:28.0
Based on its recent analysis of the surface mount technology (SMT) reflow soldering equipment market, Frost & Sullivan recognizes Heller Industries, Inc. with the 2016 Global Frost & Sullivan Award for Growth Excellence Leadership. Heller Industries has made remarkable improvements to its product and technology portfolios over the last 10 years to emerge a top participant in the SMT reflow soldering equipment market.
Industry News | 2012-05-11 20:35:45.0
Heller Industries has been awarded a 2012 SMT VISION Award in the category of Soldering Reflow for its 1936 Mark 5 Reflow Oven. The award was presented on April 25, 2012 at the Nepcon China Exhibition.
Parts & Supplies | Pick and Place/Feeders
CP45 Filter Part No:N454ZX11-049-001 Our company products fields : 1.used SMT machines , peripheral equipments and spare parts : SMT feeders, nozzles, belts, filters, motors, boards, Cylinders,Guides, Feeder parts etc... (Mainly parts brand
Parts & Supplies | SMT Equipment
SAMSUNG SMT MARGINAL RAY CP40LV VACUUM GENERATOR Our company products fields : 1.used SMT machines , peripheral equipments and spare parts : SMT feeders, nozzles, belts, filters, motors, boards, Cylinders,Guides, Feeder parts etc... (Mainly par
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Technical Library | 2019-07-10 23:36:14.0
Pockets of gas, or voids, trapped in the solder interface between discrete power management devices and circuit assemblies are, unfortunately, excellent insulators, or barriers to thermal conductivity. This resistance to heat flow reduces the electrical efficiency of these devices, reducing battery life and expected functional life time of electronic assemblies. There is also a corresponding increase in current density (as the area for current conduction is reduced) that generates additional heat, further leading to performance degradation.
Nano-copper sintering in formic acid vapor.
1809 MK5 - Heller Advanced In-Line Vacuum Reflow Oven Nitrogen System with Balanced Flow Technology 9 Top And Bottom Heated Zones - highest zone count per linear foot in the industry! 100" Heated Length - for super throughput! 2 Internal C
Training Courses | | | PCB Assembly Courses
The PCB assembly courses provide knowledge of different processes and equipment used in TH and SMT assembly of printed circuit boards.
Training Courses | ONLINE | | IPC-A-610 Trainer (CIT)
The Certified IPC-A-610 Trainer (CIT) courses recognize individuals as qualified trainers in the area of quality assurance of electrical and electronic assemblies and prepares them to deliver Certified IPC-A-610 (CIS) training.
Events Calendar | Thu Oct 03 00:00:00 EDT 2019 - Thu Oct 03 00:00:00 EDT 2019 | ,
IPC Tech Ed Webinar Series: Ball Grid Array (BGA) and Bottom Termination Component (BTC) Design and Assembly Challenges: Reflow Profiling to Achieve Low Defect Rates and Successful Assembly! – Part 2
Events Calendar | Wed Jun 22 00:00:00 EDT 2022 - Wed Jun 22 00:00:00 EDT 2022 | ,
Empire Chapter Webinar: LIVE Action Reflow Focused Process
Career Center | Florham Park, New Jersey USA | Engineering
Field Service Engineer Job Description The basic function of this position: Installation, training, repair, and implementation of retrofits on the complete line of Heller reflow ovens. Candidate must be a US citizen. DUTIES AND RESPONSIBILITIES: S
Career Center | Detroit Metro area, Michigan USA | Engineering,Maintenance,Production,Technical Support
Technicians from entry level to senior level pro's. Prefer experience with one or more of the following OEM Equipment brands. Universal Instruments Speedprint Europlacer SMT (of Germany) Reflow Ovens Sanyo Panasonic DEK
Career Center | chennai, India | Engineering,Maintenance
Nokia India Pvt LTD. Sriperumpudur – Board Assembler Maintenance Technician from Sep 2009 to till now. Machines Handled Pick & Place : FUJI NXT Machines FUJI NXT - M3 II ,M3S. Reflow oven: Hot flow 3/20, 2/14. Stencil Pr
Reflow Profiling: Time Above Liquidus Reflow Profiling: Time Above Liquidus Despite much research and discussion on the subject of reflow profiling, many questions and a good deal of confusion still exist. What is clear is that the pains often
| http://etasmt.com/cc?ID=te_news_bulletin,19761&url=_print
LED Reflow Oven Conditions and Temperature Time Control-News-Reflow oven,SMT Reflow Soldering Oven-cmsadmin Reflow oven,SMT Reflow Soldering Oven 当前位置: Home >> News
Lewis & Clark | http://www.lewis-clark.com/online-auction-time/
Online Auction Time - Lewis and Clark Skip to content My Cart: 0 View Cart Checkout No products in the cart. Subtotal: View Cart Checkout Lewis and Clark We Discover Equipment Opportunities NH: 603-594-4229 FL: 813-888-7436 sales@lewis
