We specialize in SMT process . Our production capacity is 12million shots per month.We have 2 lines of SMT,KME,CM82ME(Tact time0.15sec)&Panasert,MK1-C(Tact time0.28sec).Main course of business is sub-contractors for Panasonic(Malaysia).
Appling Scope: For needs to select the more different quantity deposit on the sole work piece the product to suppose. Precision Tolerance:0.001S Key Features 1.The digital dispenser has three modes of operation (manual, timed and cycling)
The TH-2004kB has a bright four-digit LEDscreen and automatically cycle, "teach & learn" function suitable to dispense for mass production or for the products which are required high precision. Precision Tolerance:0.001S Features: 1.Manual
Electronics Forum | Tue Nov 22 10:46:56 EST 2005 | Rob
No, come to think of it I don't think you did. Well, at least if you discount the last 5000 times. Sorry, I'm exaggerating only 4952 times. ;0)
Electronics Forum | Wed Aug 11 16:30:31 EDT 2010 | swag
Sounds like your PCB count is set at 2. Many times 0 is setting for continuous use. Another cause could be that your SMEMA is not working properly with your downstream conveyor and the machine thinks it can't allow another board into the worknest.
Used SMT Equipment | Chipshooters / Chip Mounters
FUJI, Chip Shooter, type CP643E, s.n. 2066, Left to right, cap. 40.000 CPH, Device input 140-8mm, with 20 heades, 6 nozels each, 2 tables 70 feeders each, PCB dimensions Max: 457mm x 356mm Min: 80mm x 60mm,Board Thickness: 0.3 to 4.0 mm, Component ca
Used SMT Equipment | Chipshooters / Chip Mounters
FUJI, Chip Shooter, type CP643E, s.n. 1278, Left to right, cap. 40.000 CPH, Device input 140-8mm, with 20 heades, 6 nozels each, 2 tables 70 feeders each, PCB dimensions Max: 457mm x 356mm Min: 80mm x 60mm,Board Thickness: 0.3 to 4.0 mm, Component ca
Industry News | 2022-08-23 03:26:21.0
Today's smart wearable and automotive electronic products are increasingly developing towards small, light, thin, short, and multi-functional Friendly mobile phone assembly and manufacturing new materials, what challenges will PCBA circuit board assembly technology and circuit board testing and testing technology face, and which aspects will it develop towards, ICT testing, flying probe tester, AOI testing, X-Ray inspection, 3D-CT inspection, etc., has become one of the important hot topics discussed in the electronics manufacturing industry.
Parts & Supplies | Assembly Accessories
Detail Information: 1, Part Name: Hand Lever Assy 2, Part Number: KW1-M114A-000 3, Model: CL8mm 4, Brand: Yamaha Yamaha CL8mm Tape Feeder Parts KW1-M114A-000 00X Hand Lever Assy KW1-M1510-000 Body Assy 1 K87-M112L-100 Sprocket Axis Assy
.png)
Parts & Supplies | Assembly Accessories
(8.5X745)(8.5X925)(8.5X1100)(8.5*1190)(8.5X1195)(1250×8.5mm× 0.6mm)(8.5*1285)(8.5*1315)(8.5×1350)(8.5×1355)(8.5X1390)(8.5X1400)(1485×8.5mm× 0.6mm)(8.5 X 1495 mm)(8.5×1530)(4.5×1595)(8.5 X 1675 mm)(8.5X1
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Description MODEL ID: CM402-L MODEL NUMBER: KXF-4Z4C PCB DIMENSIONS: L 50 mm x W 50mm to L 510 mm Ã? W 460 mm HEAD TYPE: Type A-2 (12/12 nozzles HIGH-SPEED) (OPTION) Number of nozzles: 12 nozzles/head Maximum speed: 0.052 s/chip (69,500
Panasonic CM602-L high-speed module placement machine, CM602-L placement machine not only follows the original module of Panasonic CM402, but also adds 12 nozzle high-speed head and direct suction tray as needed. The function of the original 8 nozzle
Career Center | Brookfield, ALL USA | Management,Production
Training and Qualifications Mil standards 464 Mil Standards 2000 ESD Training Cellular Manufacturing TQM Totally Quality Manufacturing ISO 9000 and 9001 IPC Standards, IPCA-610 IPC-J-STD-001E OSHA training LEAN Manufacturing, JIT (Just In T
Career Center | , | 2011-11-16 09:17:11.0
Mil standards 464, Mil Standards 2000, ESD Training, Cellular Manufacturing, TQM Totally Quality Manufacturing, ISO 9000 and 9001 IPC Standards, IPCA-610, IPC-J-STD-001E, OSHA training, LEAN Manufacturing, JIT (Just In Time) Six Sigma, AS400 Systems
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/RSS_what-is-the-meaning-of-mfr_topic1852.xml
; you write " 14.00 Normal 0 21 false false false DE X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Normale Tabelle"; mso-tstyle-rowband-size
| https://unisoft-cim.com/cycle-times.html
PCB Cycle Times for Component Insertion on PC Board | Unisoft ≡ Menu Skip navigation For over 35 years, Intelligent PCB Manufacturing Automation Software Be production ready in minutes, not days
.gif)