Industry Directory | Manufacturer
Manufacturer of advanced process chemistry for plating, masking and stripping. Custom manufacturing of automated equipment for electrodeposion including; hoist systems, reel-to-reel and continuous vertical processing equipment.
Industry Directory | Manufacturer
US manufacturer of metallized ceramic substrates & packages; specializing in PCTF (plated copper over thick film) & low cost AgENIG (silver with electroless nickel and immersion gold plating).
New Equipment | Rework & Repair Equipment
The BEST Gold Contact Replating Kit includes the tools you need for fast replating and modification of circuit contacts. Edge contacts may require replating if they are contaminated with solder or become scratched during handling or do not meet the m
New Equipment | Rework & Repair Equipment
BEST circuit frames come in both dry film and epoxy versions. We can produce circuit frames in 1 and 2 oz copper as well as with shiny tin or nickle gold coating. These circuit frames are microetched on the board side in order to insure better adhesi
Electronics Forum | Tue Apr 22 12:33:35 EDT 2014 | barryg
No we have a battery spring that is soldered directly to a PCB (standard tin plated copper PCB). The Battery spring supplier (and I have no confirmation he makes them or buys them) claims they are tin plated. When trying to solder to them it is very
Electronics Forum | Mon Apr 21 16:38:45 EDT 2014 | barryg
Hello all. We have been having some problems soldering to what we believe is a nickel plated spring steel battery terminal to a PCB. We have tried scrapping , then tinning, dipping and still have problems. Are there any special fluxes or pre-treats t
Used SMT Equipment | AOI / Automated Optical Inspection
OMRON AOI VT-RNS2-L Omron AoiVT-RNSⅡ parameters Hardware part LSIZE Image signal input part Camera 3CCD camera Lighting series Ring LED (R.G.B) Image resolution 10, 15, 20um Mechanism part Transmission method Belt transmission method Producti
Used SMT Equipment | Soldering Equipment/Fluxes
The following Ersa Ecoselect 350 is a lead free selective solder system with various spares. It is included in the Manroland Online Auction scheduled for August 27-28 on www.xlineassets.com. This system will be sold to the highest bidder and is curre
Industry News | 2003-05-19 10:06:43.0
The PCB is available with a maximum panel size of 406-by-460mm and a minimum board thickness of 0.8mm.
Industry News | 2003-06-23 08:49:39.0
Three Organizations from the US, Europe and Japan to
Parts & Supplies | SMT Equipment
PA Main Parts Part Name：NICKEL HYDRIC STORAGE BATTERY PART No：N9973GB6-005 Part Name：PIN PART No：1023810003 Part Name：VANE PART No：N45214022A Part Name：CAM FOLLOWER & LOCK-NUT PART No：N531CFH6RA Part Name：PIN PART No：102381000
Parts & Supplies | SMT Equipment
PA Main Parts Part Name：NICKEL HYDRIC STORAGE BATTERY (电池) PART No：N9973GB6-005 Part Name：PIN (MSH头部螺丝-长) PART No：1023810003 Part Name：VANE (真空泵碳片) PART No：N45214022A Part Name：CAM FOLLOWER & LOCK-NUT (支撑凸轮及螺母) PART No：N531CFH6RA Part Nam
Technical Library | 1999-05-07 11:28:39.0
There are many things that can go wrong when soldering to gold plate over nickel surfaces. First of all, we know that gold and solder are not good friends, as any time solder comes into contact with gold, something seems to go wrong. Either the solder bonds to the gold and eventually pulls off as the tin and gold cross-migrate, leaving voids; or the solder completely removes the gold and is expected to bond to the metal which was under the gold.
Technical Library | 2014-06-23 14:50:52.0
It was unusual to see chip terminations change colors when tin lead solders were used but with the introduction of lead free reflow soldering and the corresponding increases in reflow temperatures terminations are now changing colors. Two conditions are present when reflow temperatures are increased for lead free solder alloys that leads to discoloration. Reflow temperatures are above the melting point of tin (Sn MP is 232oC). Air temperatures commonly used in forced convection reflow systems are high enough to both melt the tin plating on the termination allowing it to be pulled into the solder joint due to solder joint liquid solder surface tension leaving behind the exposed nickel barrier. Now those metal oxide colors will be visible due to high air temperatures during reflow.
Auto Round Blade V-cut PCB Routing Machine ML-505 Feature： PLC accurately controls the automatic sub-board, and the docking machine can realize unattended full-automatic sub-board operation. Automatic and accurate feeding plate saves the trouble
Suitable for cutting all kinds of PCB boards with V-cut, SMT circuit boards, aluminum boards, LED circuit boards, LED strips. Mainly used in the LED, SMT, mobile phone / mp3, electric toy, various electronic . please feel free to contact email addr
Training Courses | | | PCB Rework and Hand Soldering Courses
The PCB rework and hand soldering courses courses cover techniques of rework and repair of PCBs, BGAs and other electronics assemblies, and teach fundamentals of soldering of electronics assemblies.
Events Calendar | Mon Sep 14 00:00:00 EDT 2020 - Mon Sep 14 00:00:00 EDT 2020 | ,
Printed Circuit Board (PCB) Inspection & Quality Control
Events Calendar | Tue Jan 23 00:00:00 EST 2018 - Tue Jan 23 00:00:00 EST 2018 | New Milford, Connecticut USA
FREE Webinar: Eliminate Circuit Board Problems and Failure Modes
Career Center | Houston, Texas USA | Engineering,Management,Quality Control,Technical Support
Seasoned Process & Quality Engineer. Degreed Chemical Engineer. 20+ years in Electronics Semiconductor manufacturing. Proficient in Quality Statistical tools, Design of Experiments, FMEAs, APQP, PPAP, ISO 9000, ISO/TS 16949 etc.
Career Center | Shen Zhen, China | Management,Sales/Marketing
Working in GLORYPCB for 10 years.knowing electronic supply chain very well. especially for PCB PCBA assembly and other Electronic Manufacturing Service.Glorypcb is a professional electronic manufacturer located in Shenzhen with three facilities.offe
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/efd/products/solder-paste/fluxplus-paste-flux
Iron / Alloy42 Nickel Silver Palladium Platinum Silver Solder Plated Stainless Steel Tin Titanium Non-solderable Zinc Flux Types Recommended Use RMA Rosin mildly activated Recommended RA Rosin activated Wets clean surfaces NC No clean Alloy specific (contact EFD
| http://etasmt.com/cc?ID=te_news_industry,3561&url=_print
('lead' here refers to the external pins of the package for connecting the device to the outside world, and not the element Pb). Lead finish is the application of a layer of metal over the leads of the device to improve its solderability, protect it from corrosion and mechanical damage, and improve its appearance. Tin (Sn)-Lead (Pb
.gif)
