Brief Introduction NeoDen3V is an upgraded version of TM245P series. It features dual head, 44 feeder slots, vision system and flexible positioning system, which is suitable for prototyping, small-medium batch production with stable performance and
 拷贝.jpg)
Brief Introduction NeoDen3V is an upgraded version of TM245P series. It features dual head, 44 feeder slots, vision system and flexible positioning system, which is suitable for prototyping, small-medium batch production with stable performance and
Electronics Forum | Fri Apr 12 15:10:00 EDT 2002 | jsherrow
IMHO it's caused by three things: 1) placement 2) placement 3) placement
Electronics Forum | Thu Apr 11 16:37:16 EDT 2002 | pteerink
Profile would be the first place I look. Check your rise and fall rates for temp. Should be no more than 2 deg/sec for rise and 4-6 deg/sec for cooling. Phil
Used SMT Equipment | Pick and Place/Feeders
Make: FUJIModel: FUJI AIMEXIIICDetails:1.Compact Size: The AIMEXIIIC is designed to be compact, suitable for production environments with limited space. The machine size is L: 1,280 x W: 2,346 x H: 1,465 mm.2.High Versatility: Supports placement fro
Used SMT Equipment | Pick and Place/Feeders
Make: FUJIModel: FUJI AIMEXIIICDetails:1.Compact Size: The AIMEXIIIC is designed to be compact, suitable for production environments with limited space. The machine size is L: 1,280 x W: 2,346 x H: 1,465 mm.2.High Versatility: Supports placement fro
Industry News | 2014-04-08 13:08:59.0
IMS announced today that the A-0402WA attenuator is now available taped face-down in the pocket. The part number for this orientation is IMS2652. This taping arrangement has previously been available for the A-0603 (IMS2533) and A-0805 (IMS1141) sizes. Now all three of the most popular sizes of the A-Series are available in both face up and face down arrangements.
Industry News | 2008-07-30 23:24:03.0
COLORADO SPRINGS, CO � July 29, 2008 � Virtual Industries Inc., a leading supplier of manual vacuum handling solutions, introduces the VSPT0803 small part tip.
7.jpg)
Parts & Supplies | Pick and Place/Feeders
YAMAHA CL 8x2 Feeder（0402） YAMAHA CL YAMAHA CL Feeder Part No: Yamaha CL 8*2mm Feeders for 0201 KW1-M1500-030 Yamaha CL 8*2mm Feeders for 0402 KW1-M1400-00X Yamaha CL 8*4mm Feeders KW1-M1100-000 Yamaha CL 12mm Feeders KW1-M2200-300 Yamaha CL
Parts & Supplies | Pick and Place/Feeders
YAMAHA TAPE FEEDER 8mm 0402 CL PN 9498 396 00340 PA2903-78 for smt machine Yamaha CL Feeders models: Part Number: Yamaha CL Feeder KW1-M1500-030 Yamaha CL 8*2mm Feeders for 0201 KW1-M1400-00X Yamaha CL 8*2mm Feeders for 0402 KW1-M1100-000 Yamah
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Technical Library | 2021-09-01 15:31:39.0
The long-standing trend in the electronics industry has been the miniaturization of electronic components. It is projected that this trend will continue as Original Equipment Manufacturers (OEMs) and Electronic Manufacturing Service (EMS) providers strive to reduce "real estate" on printed circuit boards. Typically, the miniaturization of components can be achieved by integration or size reduction. At present, size reduction is considered to be more cost effective and flexible than integration. Passive components, which are used in limiting current, terminating transmission lines and de-coupling switching noise, are the primary focus in size reduction due to their variety of uses.
Advanced high speed and high accuracy makes the RX-7 an ultimately high productive modular mounter with the latest 2 head dual lane design. Achieve high area productivity with a smaller and lighter design - the machine width is only 988mm! High P
Events Calendar | Mon Apr 12 00:00:00 EDT 2021 - Mon Apr 12 00:00:00 EDT 2021 | ,
Europe Chapter Webinar: Tombstoning Components during Reflow Soldering - Causes & Cures
Career Center | , | Engineering,Production
Project Management, SMT Process Engineering
| http://etasmt.com/cc?ID=te_news_bulletin,23571&url=_print
>> News Tombstoning -PCB Soldering Problems Tombstoning PCB Soldering Tombstoning -PCB Soldering Problems A type of open, known by a number of names
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/RSS_altium-0402-resistor-footprint_topic2596.xml
PCB Libraries Forum : Altium 0402 Resistor Footprint PCB Libraries Forum : Altium 0402 Resistor Footprint This is an XML content feed of
