New Equipment | Cleaning Equipment
The Low Cost / High Efficiency Stencil Cleaner Stainless Steel Construction Cleans Stencils up to 29" x 29" Low profile allows easy loading and unloading Side mounted “sweep frequency” ultrasonic transducers with 10 year limited warr
New Equipment | Cleaning Equipment
Aqueous and Semi-Aqueous PCB Cleaning Systems The MicroJet™ Inline cleaning System with Progressive Energy Dynamics™ provides the highest level of SMT cleaning available on the market today. Progressive Energy Dynamics (PED™) is a proprietary spray
Electronics Forum | Tue Sep 07 12:57:00 EDT 2010 | jrr3434
Thanks for the info mike. How well do these batch cleaners work with densely populated through hole boards that were solder with no clean flux? Is there a problem with water getting trapped under large capacitors? I'm using kester 959t for flux on b
Electronics Forum | Mon Sep 09 13:46:34 EDT 2002 | dragonslayr
Your lack of obvious solder balls indicates you have a decent process. However, there are still small solder balls that are free and floating on the surface of the boards prior to wash. That same solder ball is washed off and ends up in the wash solu
Industry News | 2014-04-02 17:56:58.0
BEST Inc , Rolling Meadows IL, announced the release of a new shopvac like product for the PCB rework and repair area. Connected to shop air this product is able to suck up liquids and solids,
Industry News | 2013-08-28 13:54:14.0
Ascentech LLC will exhibit the Gensonic UltraSonic Stencil Cleaner and the new Solder Saver at the upcoming SMTA Capital Expo & Technical Forum, which will be held September 10th, 2013 at the Johns Hopkins University/Applied Physics Lab, 1110 Johns Hopkins Rd., Laurel, MD 20723. Show Hours are from 9am-3:30pm.
ATRON® SP 200 is a water-alkaline surfactant cleaner, specifically developed to remove baked-on fluxes from solder pallets and condensation traps. ATRON® SP 200 can be used for the removal of unsoldered solder pastes from SMT stencils. The cleaner ca
AF04 Cleans condensation traps, solder frames and carriers The kolb AF04 is a three chamber system which enables short cycle times. The system is therefore capable within a short time of parallel process cleaning, rinsing and drying. It cl
SMTnet Express, July 20, 2017, Subscribers: 30,612, Companies: 10,637, Users: 23,528 Reactivity Of No-Clean Flux Residues Trapped Under Bottom Terminated Components Bruno Tolla, Ph.D., Jennifer Allen, Kyle Loomis - Kester Corporation , Mike
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/industrial-coating-systems/products/powder-coating-feed-centers/spectrum-hd-powder-feed-centre
. Closed-loop feed center for fast, clean color change Assures powder containment during operation and color change for a cleaner, safer and more productive environment
ASCEN Technology | https://www.ascen.ltd/Blog/Solutio/602.html
surface insulation resistance but will also allow any moisture trapped in the circuit board to escape. The concept of a conformal coating of electronics was originally proposed,after the conformal coating machine application more and more popular, and through research to meet the demanding requirements
