PRO 1600-RS is specifically configured for reflow simulation and thermal stress testing applications. This includes Preconditioning of Nonhermetic Surface Mount Devices (SMD) per JESD22-A113F standard, Moisture Sensitivity Level (MSL) testing of semi
New Equipment | Cable & Wire Harness Equipment
Overview The WireStacker 3100 is a modular high-performance wire stacker for the precise, axial stacking of cables. The system consists of either a base element of 2.5 m (8.2 ft) or a base element with an extrension to 5 m (16.4 ft). The modules ca
Electronics Forum | Thu Aug 30 14:14:27 EDT 2001 | dougt
James Take a board with double sided tape and run it with all the other parts "shorted". Make sure that the part is being placed by the head/spindle that will be used during a full run. Inspect the part after it is placed and carefully remove it a
Electronics Forum | Sat May 29 15:55:04 EDT 1999 | M Cox
| Is it possible to place parts that do not have leadframes exposed when looking from the top side of the part such as BGA's using a Fuji IP1 with a SMD1 vision (Binary) system. I realize that the IP1 does not have front lighting but according to a F
Used SMT Equipment | Turnkey Lines
Functional Pre-Owned Complete SMT Assembly Line - Still Operational (Subject to prior sell, I am listing this on other venues) Up for sale is a full turnkey SMT line and all of it's accessories, of which there are a lot, fe
Industry News | 2016-02-15 09:46:51.0
Count On Tools has released a new accessory – the Lightweight Rails – for its award-winning line of StripFeeder products. The StripFeeder Lightweight Rails enable customers to take full advantage of the StripFeeder platform when operating in OEM tray towers with weight limits on tray capacity. The skeletonized design reduces carrier tray weight by 40-50 percent. StripFeeder Lightweight Rails are available in 0.25" (6mm), 0.50" (12mm), 0.75" (19mm), and 1.125" (28mm) pocket depths.
Industry News | 2016-02-24 19:42:19.0
Count On Tools has released a new version in its award-winning line of StripFeeder products – the StripFeeder Lightweight. Increased demand for use of the StripFeeder platform in OEM automated tray towers prompted the need for a low-mass version to accommodate machine weight limits on tray capacity. The StripFeeder Lightweight system allows customers to take advantage of the StripFeeder platform in these specific applications.
Parts & Supplies | Pick and Place/Feeders
KM5-M4580-030 KM5-M4580-XXX-DB8 Assembleon 5322 216 04674 I/O CONV UNIT ASSY KM5-M4580-030 KM5-M4580-XXX-DB8 Assembleon 5322 216 04674 I/O CONV UNIT ASSY HARDWARE MANUAL This unit consists of two boards, and is used to control the DI/DO signals of
Parts & Supplies | Pick and Place/Feeders
1 High Speed Mater KE-2050 Since 1993, it has been selling "KE series" products and has received high praise from customers at home and abroad for many years. The series of products are combined with a chip machine and a general purpose ma
Full Automatic V-cut PCB Depaneler Introduction: This equipment can further improve the quality of depaneling. It can realize V-groove XY two-way automatic cutting, cutting aluminum & FR4 boards without burr, can connect the assembly line to realize
ASCEN Technology | https://www.ascen.ltd/Blog/Solutio/602.html
of PCB conformal coating.ASCEN was the part of ASCEN early research and has remained a pioneer as the PCB conformal coating machine technology has expanded to an array of industries today including
| https://unisoft-cim.com/aoi_download.htm
of Blinking and Coloring by part number for slide line hand assembly add additional instructions for the assembler in the Operations Field (see figure below). For example: "Mary hand insert - bin tray #8 - RESISTOR 4.75K_1/4W_1% - p/n-391729-02-0
winsouce.jpg)