conception and construction of prefabricated modular structure and air treatment systems, install hermetic rooms and buildings to control pressurisation, dust, noise, vibrations, micro-organisms, temperature, humidity, water and corrosive agents
Industry Directory | Manufacturer
Design and manufacture of collision avoidance (proximity detection and warning systems) systems to help lower risk of injury at industrial work sites.
New Equipment | Curing Equipment
Heller 788 In-line, Continuous Cure, Vertical Format Oven This elevator format oven utilizes vertical space to accomodate curing applications of up to 4 hours while only occupying 96" (2.5m) of floorspace. Perfect for underfill and encapsulant.
New Equipment | Curing Equipment
The mini vertical oven has a cycle time of 25 - 60 seconds per 150mm fixture, 4mm Edge Hold Pins and Guides. PCBs up to 250mm wide can be processed. Dual Feed option for high throughoutput. In-line, vertical automation of the epoxy cure process prod
Electronics Forum | Mon Jan 09 18:57:13 EST 2017 | sssvajunas
What is optimal smt room temperature and % of wetness?
Electronics Forum | Tue Jan 10 16:01:20 EST 2017 | davef
A review document for J-STD-001F with Amendment 1 had the following wording, but you should check the actual document to be sure of correctness 4.2 Facilities Cleanliness and ambient environments in all work areas shall [D1D2D3] be maintained at le
Used SMT Equipment | Soldering - Reflow
HEXI, Lead-Free reflow soldering machine, type RFN1020/N, s.n. 0611018, Left to Right, with 10 heating heads plus cooling head, lenght of heating zones 3365mm,max width of PCB 450 mm, width of conveyor 50 to 450 mm, height of conveyor 920 +/_ 20 mm,
Used SMT Equipment | Soldering - Wave
Solder type lead free solder Max PCB 50—250mm Components height Above ?130mm under ?8mm Pot Capacity 130KG ( Titanium / SUS316 ) Preheating length
Industry News | 2003-06-25 12:28:40.0
The chart includes a variety of diagrams, tables, and ratio charts for RF Emissions; Direct RF Power Injection; Bulk Current Injection (BCI); ESD and Transients; as well as TEM Cell and Stripline testing.
Industry News | 2003-06-23 08:49:39.0
Three Organizations from the US, Europe and Japan to
.jpg)
Parts & Supplies | Soldering - Reflow
This reflow oven is top quality oven represent the world's best low cost, high performance solder reflow sytem. The sensor is designed in the front of tip and the temperature induction is very exact and sensitive, the speed of heating and recovery of
Parts & Supplies | Soldering - Wave
Overseas Agent and Distributor Wanted ! Features : Spray Fiuxer: 1) Oriental motor drives the flux spraying system. Spraying speed is adjusted according to PCB board width and moving speed to ensure even spraying all time. 2) Durable “Meiji
Technical Library | 2020-12-07 15:26:06.0
Temperature cycling testing is a method of accelerated life testing done to PCCs that are exposed to normal operation temperature variations over its lifetime. During the testing, intermittent "open" failures can first occur at the hot and cold extremes of the test, exposing weaknesses in the design and assembly. A poor/weak solder joint fatigues, a via trace or barrel cracks, loose connections or a component fails all causing an intermittent open. When not at extreme temperatures, the PCC assembly relaxes, the "open" closes creating electrical connectivity. If you are monitoring the PCC under test in-situ you will know that an intermittent failure has occurred, and the test could be stopped for inspection. If in-situ monitoring was not implemented, you would not know if there were intermittent failures or not. The PCC gets powered up and works fine at room temperature.
Technical Library | 2019-05-21 00:21:26.0
Continue to talk about the dust removal from temperature humidity test chamber. Cleaning and maintenance: 1) Pls remove internal impurities inisde chamber before operation. 2) The power distribution room should be cleaned at least once a year, and the dust can be removed by vacuum cleaner. 3) The exterior chamber must also be cleaned more than once a year, which can be wiped with soapy water. Inspection and maintenance of humidifier: The water storage in humidifier should be replaced once a month to ensure clean water quality, humidifying water tray should be cleaned once a month to ensure smooth flow of water. The inspection of over-temperature protector:during the test: If the temperature is over 20 ℃ ~ 30 ℃ than the maximum value setted,the power supply of the heater will stop, the "OVERHEAT" overt-emperature warning light will automatically turn on but the fan is still in operation, if the equipment runs without operator around,the operator should check the over-temperature protector in advance to ensure wether it has been setted properly before start [wet ball over-temperature protector set to 120 ℃].
This elevator format oven utilizes vertical space to accomodate curing applications of up to 4 hours while only occupying 96" (2.5m) of floorspace. Perfect for underfill and encapsulant.
Increase productivity, improve quality, reduce costs with vertical format curing solutions from Heller Industries. Learn more: http://www.hellerindustries.com/755-Vertical-Oven.php
Events Calendar | Wed Mar 18 00:00:00 EDT 2020 - Wed Mar 18 00:00:00 EDT 2020 | College Park, Maryland USA
CALCE Reliability Science Symposium - Spring 2020
Events Calendar | Wed Oct 23 00:00:00 EDT 2019 - Thu Oct 24 00:00:00 EDT 2019 | Guadalajara, Mexico
SMTA Mexico Expo 2019
Career Center | , | Engineering,Technical Support
COMPETENCIES & SKILLS : Proficient in SMT chip Mounters and IC/Flip chip Placers like Assembleon, Panasonic, Yamaha & etc. Experienced in handling Screen Printers like Minami, Dek, Panasonic and semi-automatic Printers. Expert in Camalot
Career Center | San Pedro Sula, Cortes Honduras | Engineering,Maintenance,Management,Technical Support
Preventive maintenance on SMT machines. Corrective maintenance on SMT Machines Schedule of preventive maintenance programs. Minimum Inventory control for spare parts Automation process on SMT Lines Work Instructions for maintenance procedur
,989, Users: 41,258 Room Temperature Fast Flow Reworkable
PCB Dynamic Coplanarity At Elevated Temperatures PCB Dynamic Coplanarity At Elevated Temperatures iNEMI's SMTAI 2011 presentation by: John Davignon, Ken Chiavone, Jiahui Pan, James Henzi, David Mendez, Ron Kulterman; Intel Corporation
Heller Industries Inc. | https://hellerindustries.com/parts/438134/
438134 - Motor ASSY, 4"IMP, N2, Clean room, EXL Phone 1-973-377-6800 Company About News Events New Equipment Convection Reflow Ovens Reflow Oven MK7 -New
Qinyi Electronics Co.,Ltd | https://www.qy-smt.com/shop/c15tv0la0100-temperature-controller-152952?page=83&category=1119
JUKI Temperature Controller C15TV0LA0100 | QYSMT × Home About US ABOUT US FAQ SMT spare parts SMT Surplus equipments SMT peripheral equipments News Contact US 0 0 Sign in Contact Us Products JUKI Temperature Controller Public Pricelist Public
