Industry Directory | Consultant / Service Provider / Manufacturer / Other
Professional repairs, calibrations, training and installation of all models of Speedline MPM printers.
Industry Directory | Manufacturer
Shenzhen Huancheng Automation equipment Co.,ltd (referred to as the "HC"), a High-speed developing enterprise specializing in High Precision Automatic Solder Paste Printer research and development.
2,0 Cpk @ ±17,5 μmDemision:1300mm×1000mm×1600mmProduct description: ASM DEK TQ SMT Stencil Printer, Max PCB: 400x400 mm, Core cycle time：5 secs, Demision:1300mm×1000mm×1600mm, Wet print capability > 2,0 Cpk @ ±17,5 μm ASM DEK TQ SMT Stencil Prin
New Equipment | Assembly Services
Hanwha HM520 SMT Assembly Line Hanwha HM520 SMT Assembly Line, Usage: PCB production, Full Automatic Assembly line, Speed: 80000CPH, it's with Automatic PCB Loader, Automatic SMT stencil Printer, Koh Young KY 8080 3D SPI, Automatic Pick and place ma
Electronics Forum | Tue Oct 31 13:15:13 EST 2006 | realchunks
SWAG is prolly right. You can verify the tactile sensor by watching the machine carefully. When finding the stencil height, make sure the board goes all the way up and touches the stencil to trigger the tactile. If it doesn't, then something is wr
Electronics Forum | Tue Oct 31 13:36:11 EST 2006 | SWAG
Maybe Carol Anne will come to the light and levitate the stencil to match the blade hieght.
Used SMT Equipment | Screen Printers
Item Location: Camarillo, CA USA 2D Inspection, Under Stencil Wipe OS: Windows NT SW: 8.4.3
Used SMT Equipment | Screen Printers
2002 Speedline UP 2000 Hi E Screen Printer Refurbished by OEM in 2006 Serial: 21223 Features: Cognex 5000; 4 Axis Motion Control; Tactile Sensor; Pass Through Conveyor; 2D Post Print Inspection; Y Snuggers; Vacuum Stencil Wiper;
Industry News | 2003-06-10 08:16:44.0
The following text describes the application of NWA Quality Analyst to quality control in the assembly of electronic components.
Industry News | 2015-10-28 15:22:47.0
EMS provider Micro Industries in Westerville, Ohio will be liquidating some of their excess and unused assets utilizing the online auction services of Baja Bid. The bidding for this event will open promptly at 8:00am EST on December 1, 2015 and the closing will begin at 11:00am EST on December 3, 2015
Parts & Supplies | SMT Equipment
The entire set of components measuring blade Name: 990314 MPM stencil measuring height; scraper height of the entire set of measured components; including cylinders, motors, contact switch Part Number: 990314 MPM stencil measuring height; scraper
Parts & Supplies | Screen Printers
Part Number: 1002440 Applicable models: MPM AP; UP2000; UP2000HIE Side height motor Tactile motor; 1002440, new spot Tactile part MPM AP UP2000 1002440 MPM stencil height measured motor; MPM height measured motor scraper MPM AP UP2000 CA8
Technical Library | 2023-07-25 16:50:02.0
Some of the new handheld communication devices offer real challenges to the paste printing process. Normally, there are very small devices like 01005 chip components as well as 0.3 mm pitch uBGA along with other devices that require higher deposits of solder paste. Surface mount connectors or RF shields with coplanarity issues fall into this category. Aperture sizes for the small devices require a stencil thickness in the 50 to 75 um (2-3 mils) range for effective paste transfer whereas the RF shield and SMT connector would like at least 150 um (6 mils) paste height. Spacing is too small to use normal step stencils. This paper will explore a different type of step stencil for this application; a "Two-Print Stencil Process" step stencil. Here is a brief description of a "Two-Print Stencil Process". A 50 to 75 um (2-3 mils) stencil is used to print solder paste for the 01005, 0.3 mm pitch uBGA and other fine pitch components. While this paste is still wet a second in-line stencil printer is used to print all other components using a second thicker stencil. This second stencil has relief pockets on the contact side of the stencil any paste was printed with the first stencil. Design guidelines for minimum keep-out distances between the relief step, the fine pitch apertures, and the RF Shields apertures as well relief pocket height clearance of the paste printed by the first print stencil will be provided.
Technical Library | 2023-07-25 16:25:56.0
This paper address two significant applications of stencils in advance packaging field: 1. Ultra-Thin stencils for miniature component (0201m) assembly; 2. Deep Cavity stencils for embedded (open cavity) packaging. As the world of electronics continues to evolve with focus on smaller, lighter, faster, and feature-enhanced high- performing electronic products, so are the requirement for complex stencils to assemble such components. These stencil thicknesses start from less than 25um with apertures as small as 60um (or less). Step stencils are used when varying stencil thicknesses are required to print into cavities or on elevated surfaces or to provide relief for certain features on a board. In the early days of SMT assembly, step stencils were used to reduce the stencil thickness for 25 mil pitch leaded device apertures. Thick metal stencils that have both relief-etch pockets and reservoir step pockets are very useful for paste reservoir printing. Electroform Step-Up Stencils for ceramic BGA's and RF Shields are a good solution to achieve additional solder paste height on the pads of these components as well as providing exceptional paste transfer for smaller components like uBGAs and 0201s. As the components are getting smaller, for example 0201m, or as the available real estate for component placement on a board is getting smaller – finer is the aperture size and the pitch on the stencils. Aggressive distances from step wall to aperture are also required. Ultra-thin stencils with thicknesses in the order of 15um-40um with steps of 15um are used to obtain desired print volumes. Stencils with thickness to this order can be potential tools even to print for RDLs in the package.
Hello and thank you for your interest in our MPM UP2000 Hie Stencil Printer For Sale. The machine was recently taken out of an SMT Manufacturing facility which closed. It is located at our facility where it was powered up, cycled, and zero reset by a
PCB Printers/ Solder Paste Stencil Printer Semi-Auto SMT Stencil Printer ETA high accuracy PCB printing machine, solder paste printer, automatic stencil printer with best quality and service. ❙ Introduce of PCB Printing Machine
Career Center | San Pablo City, Laguna, Philippines | Engineering,Maintenance,Production,Sales/Marketing,Technical Support
Some key points you may find relevant to this job opportunity include: Extensive experience and knowledge on Service and Technical skills by performing Set-up, Buy-off, troubleshooting of the assigned Equipments. Provide solution to custom
Career Center | Yishun, Singapore | Maintenance
To : Sir/Madam Subject: Apply for Job Dear Sir/ Madam, I write to enquire if there is a vacancy for a SMT Maintenance Engineer in your firm.I am 40 years old a permanent resident of Singapore with an IC # S6863162i and i'm still work
| https://pcbasupplies.com/stencil-printers/page/2/
Stencil Printers Login Create Account Contact View My Cart Menu × Categories Hand Soldering & Rework Automation Tooling PCB Support Systems Soldering Robots Material Handling Dry Storage Cabinets Component Handling Selective Solder Nozzles Pick
Lewis & Clark | http://www.lewis-clark.com/product-tag/up2000-hie/
: Speedline MPM Model: UP2000-HiE Vintage: 2005 Details: 2D Vision 29” x 29” stencil frame size Max PCB size 20” x 16” Programmable Under head Stencil Wipe with Vacuum HiE 4 th Axis movement Front and back Y-Snuggers for PCB hold down Auto conveyor rail adjust Windows Operating System Condition: Complete
