Affordable Manufacturing Execution System (MES), Shop Floor Automation and Integration Software CELLS WORKFLOW Product Tracking MES is an affordable full Manufacturing Process Control Software System providing Plant Intelligence for any industry.
10 Zones Economical SMT Reflow Oven KTE-1000 Heating:10 heating zones Cooling zones: top 2 Weigth: APPROX 2615KG Dimension: 6135*1360*1490mm Product description: 10 Zones Economical SMT Reflow Oven KTE-1000, Heating:10 heating zones, Cooling z
Electronics Forum | Mon Aug 23 12:06:37 EDT 2021 | mk15
Hi, I am looking for a an Electrical Service Manual for a Universal Universal sequencer vcd 6241d. thanks
Electronics Forum | Mon Aug 23 13:39:25 EDT 2021 | charliedci
Try Dan at swuicsup@yahoo.com. He carries parts and knows these machines well.
Used SMT Equipment | THT Equipment
Cycle Rate Max 25,000 cph (0.14 sec. per insertion) Reliability 200 ppm or better Component Types Capacitors, resistors, diodes, jumper wire, etc. Component Specs Component Class I Distance Between Tapes 52.4mm +/- 1.5mm (2.063” +/- 0.059”) Pit
Used SMT Equipment | AOI / Automated Optical Inspection
BF-Frontier is used in the inspection of large-size printed circuit boards. In this device, the unique control sequence of software and hardware, accelerated scanning mode and stable optical illumination system can allow BF-Frontier to easily complet
Industry News | 2013-01-19 07:46:16.0
Information that inspires innovation is center-stage for design, printed boards, electronics assembly, test and printed electronics
Industry News | 2006-05-21 19:00:58.0
For end users that require the very best in technology.
Technical Library | 2019-12-12 02:43:44.0
Today we discuss the reason that causes temperature humidity chamber to alarm,In most cases, the equipment alarm is caused by the improper operation in the process of use, which mainly includes following reasons:that are refrigeration system, temperature system and circulating system. First, Refrigeration system 1, refrigeration compressor overpressure alarm. If the refrigerant pressure exceeds the set value, it will stop and alarm at the same time. At this time, the fault must be eliminated and then manually reset. 2, short phase power supply, phase sequence alarm. When the external power supply of the equipment is out of phase or the phase sequence is changed, it will stop and alarm at the same time. 3. The circulating cooling water is short of water to alarm. When the water pressure of the cooling circulating water system is insufficient, it will stop and alarm at the same time, and it must wait for the fault to be eliminated and reset at the same time before it could run normally. 4, refrigeration compressor overheating alarm. When the coil of the compressor is overheated and the power supply of the line is not normal, it will stop and alarm at the same time. Second, Temperature system 1, the overtemperature alarm in the chamber. The sensors in the channel and the sample area are equipped with overtemperature protection devices, and there are also overtemperature protecter on the control panel. When the temperature in the working chamber exceeds the setting value on the controller, it will stop and alarm. 2. sample overtemperature protection. When the temperature in the sample area exceeds the protection temperature set by the controller, it will stop and alarm at the same time. The overtemperature protection of the sample is divided into upper limit protection and lower limit protection, which can be set according to the demand, Third,Circulating system 1. The alarm is caused by the overheating of the circulating fan. When the coil of the fan is over-heated, the alarm will be stopped at the same time. 2. The fan over-current alarm. When the current of the fan exceeds the allowable value, the alarm is stopped at the same time, and the normal operation can only be carried out after the fault maintenance of the overcurrent is completed. This is what we talk about today,if you have more questions,let us know.
www.unisoft-cim.com/cells.html - CELLS WORKFLOW is affordable, simple to setup & use yet powerful product & job tracking software for fast New Product Introduction (NPI). The CELLS WORKFLOW software provides total traceability in manufacturing floor
Ultra-High speed measuring Measuring rate up to 40 steps per second helps reduce tact times and can actually be used in fully automated production lines averting a bottleneck. This is indeed a unique strength of Hioki’s flying probe testers. Fine pi
Career Center | Appleton, Wisconsin USA | Production,Quality Control,Technical Support
Seeking highly motivated, self-starter to be an integral part of the operations team. This person will: Perform root cause failure analysis, determine and implement appropriate corrective action on problem areas as identified. Create new i
Career Center | Reading, Pennsylvania USA | Production,Technical Support
Job Title: Surface Mount Technology Operator Department: Production Department Reports To: Production Manager FLSA Status: Non-Exempt Summary: Responsible for monitoring, maintaining, and adjusting equipment used to create electronic circuits w
Career Center | , India | Production
Reads instructions, such as work orders, drawing, and wire lists to determine materials needed and sequence of assembly, Manual Hand tool using for Wire cutting, stripping, crimping. Soldering, Splicing, Assembling PCB Boards, Boot Shrinking, Heat
Career Center | Cavite, Philippines | Maintenance,Production,Technical Support
SKILLS: Mandarin, English skills Quick Learner, willing to be trained Knowledge in Automatic Insertion and Surface Mount Technology Machine (Industrial machines) Can handle and Troubleshoot Electromechanical machines Can read and
