We manufacture multi PCB up to 12 layer,The details of our capabilities:*Micro fine line to 4 mil *Blind & buried via hole *Flying-probe testing *Carbonlack *FR4 thickness: 0.3/0.4/0.8/1.0/1.2/1.5/2.0/2.4/3.2mm *Small quantities are available *Golden finger *HAL & chemical tin
Industry Directory | Manufacturer
FLALR PCB mainly specializes in "Big volume, Rapid proofing" PCB, more than 10 years manufacturing experience,
Precision Dispensing System for Heated Dispense Applications The GPD Global MAX II is a compact; high-accuracy system designed for today’s advanced heated dispensing applications. The frame is molded from “liquid rock” which gives the system a stabl
If you have only Gerber data files to work with then ProntoGERBER-CONNECTION can help you! ProntoGERBER-CONNECTION imports raw Gerber data and allows the user to add intelligent information to the shapes on the display and create process assembly
Electronics Forum | Wed May 19 11:50:32 EDT 1999 | Chris Nuttall
We care currently running into problems during our plug via process: At the moment we plug prior to soldermask (LPISM) using epoxy resin - plugging takes place from the component side - however we are seeing solderballs after solder level.This is cau
Electronics Forum | Wed May 19 13:13:20 EDT 1999 | Dave F
| We care currently running into problems during our plug via process: | At the moment we plug prior to soldermask (LPISM) using epoxy resin - plugging takes place from the component side - however we are seeing solderballs after solder level.This is
Used SMT Equipment | AOI / Automated Optical Inspection
Description: Hello and thank you for your interest in our MVP AOI Machines For Sale.We have a total of (2)Ultra 18-20 MVP Automated Optical Inspection Machines,(1)CentOS based server. They were taken off line due to new machine installation would
Industry News | 2011-01-12 17:48:44.0
GPD Global will highlight its Positive Cavity Displacement (PCD) Dispensing in Booth #6111 at the upcoming Automation and Technology West Expo (ATX), scheduled to take place February 8-10, 2011 at the Anaheim Convention Center in Anaheim, CA.
Industry News | 2011-02-04 01:47:14.0
GPD Global will highlight its Positive Cavity Displacement (PCD) Dispensing at the upcoming SMTA Dallas Expo & Tech Forum, scheduled to take place Tuesday, March 1, 2011 at the Richardson Civic Center in Richardson, TX.
Parts & Supplies | Circuit Board Assembly Products
1). 100mm x 98mm/1up, FR-4, 2). 1mm +/-0.1mm,6 Layers 3). 1oz copper finished 3). Green solder mask/white legend 4). Min. hole 0.15mm, 4/4 mil track/gap 5). Blind via layer 1-2, via-in-pad. 6). Immersion gold surface finish
Technical Library | 2020-07-15 18:49:03.0
Via Filling • Through Hole Vias - IPC-4761 – Plugging – Filling – Filled & Capped • MicroviaFilling and Stacked Vias
Technical Library | 2019-10-10 00:26:28.0
Voids are a plague to our electronics and must be eliminated! Over the last few years we have studied voiding in solder joints and published three technical papers on methods to "Fill the Void." This paper is part four of this series. The focus of this work is to mitigate voids for via in pad circuit board designs. Via holes in Quad Flat No-Lead (QFN) thermal pads create voiding issues. Gasses can come out of via holes and rise into the solder joint creating voids. Solder can also flow down into the via holes creating gaps in the solder joint. One method of preventing this is via plugging. Via holes can be plugged, capped, or left open. These via plugging options were compared and contrasted to each other with respect to voiding. Another method of minimizing voiding is through solder paste stencil design. Solder paste can be printed around the via holes with gas escape routes. This prevents gasses from via holes from being trapped in the solder joint. Several stencil designs were tested and voiding performance compared and contrasted. In many cases voiding will be reduced only if a combination of mitigation strategies are used. Recommendations for combinations of via hole plugging and stencil design are given. The aim of this paper is to help the reader to "Fill the Void."
Precision Dispensing System for Heated Dispense Applications The GPD Global MAX II is a compact; high-accuracy system designed for today’s advanced heated dispensing applications. The frame is molded from “liquid rock” which gives the system a stabl
www.unisoft-cim.com/pcbplace.htm - The ProntoPLACE module from Unisoft is used by electronics manufacturers to generate the necessary programs for automatic PCB assembly machines in minutes. ProntoPLACE programs most popular surface mount (SMT) place
Training Courses | | | IPC-6012 Specialist (CIS)
The Certified IPC-6012 Specialist (CIS) training covers design, fabrication and inspection of rigid printed boards.
Training Courses | | | IPC-6012 Trainer (CIT)
The Certified IPC-6012 Trainer (CIT) courses recognize individuals as qualified trainers in the area of design, fabrication and inspection of rigid printed boards and prepare them to deliver Certified IPC-6012 Specialist (CIS) training.
Events Calendar | Thu Aug 22 00:00:00 EDT 2024 - Thu Aug 22 00:00:00 EDT 2024 | Prior Lake, Minnesota USA
Upper Midwest Chapter: 33rd Annual Golf Tournament
Career Center | Valley View, Ohio USA | Production
Machine operator to operate an automated through hole and Surface Mount Technology (SMT) industrial soldering machines. Operator should have 1 year hands on experience operating the Universal (Sanyo) GSM Platform Machine. Must be proficient en
Career Center | Glendale Heights, Illinois USA | Engineering,Production
Surya Electronics inc seeks a professional, innovative and detailed individual for our Process Engineer position. If you are looking for an opportunity to work in a fast-paced, manufacturing facility, then this challenging position is for you! Respo
Career Center | Lalkua, India | Engineering,Maintenance,Production,Quality Control,Research and Development,Technical Support
Machine maintenance Service and support knowledge with customer satisfactory. Deal with customers at all level via phone,remote and mail.Sound knowledge of PCB fabrication machine.
SMT Express, Volume 2, Issue No. 3 - from SMTnet.com Volume 2, Issue No. 3 Thursday, March 16, 2000 Featured Article Return to Front Page Stencil Design for Mixed Technology Through-hole / SMT Placement and Reflow by William E. Coleman, Photo
SMTnet Express, June 27, 2019, Subscribers: 32,092, Companies: 10,819, Users: 24,882 Advanced Cu Electroplating Process for Any Layer Via Fill Applications with Thin Surface Copper Credits: MacDermid Inc. Copper-filled micro-vias are a key
| https://www.eptac.com/soldertip/soldertips-avoiding-the-creation-of-splices-via-wire-twisting/
SolderTips: Avoiding the Creation of Splices Via Wire Twisting - EPTAC - Train. Work Smarter. Succeed Looking for solder training standards, manuals, kits, and more
| https://unisoft-cim.com/solder.php
PCB Selective Soldering Machine Programming Software ( flux / solder files) Thru-hole THD | Unisoft ≡ Menu Skip navigation For over 35 years, Intelligent PCB Manufacturing Automation Software Be production ready in minutes, not days