Full Hot Air Lead-Free Reflow Oven With PC Temp Control System (A800) Introduce: 1, Heating system adopts ETA patent heating technology 2, The use of imported large current solid state relay contact output, safe, reliable, equipped with a dedicated
WL 66O is one part 100% solid, dual cure UV bonding adhesives, which has been designed for wafer-level lens or optical lens attachment. It can be cured by UV in a few seconds to achieve fast fixing purpose, then further cured by thermal cure to achie
Electronics Forum | Wed Sep 26 12:16:44 EDT 2012 | bwjm
Hi Guys,recently i am facing an issue. Refer to the attached photo. This PCB is high RF speed, gold immersion single layer. After reflow, my solder seems to have black stains on it. I tried with SAC305 paste water soluble and no-clean, both results a
Electronics Forum | Tue Jun 07 10:24:59 EDT 2016 | davef
wlsmt: You’ve got to help us out here: * Why did you apply solder paste to capacitors prior to water washing the PCBA [where the caps were attached?]? * Did you reflow the Alpha WS-609? * How is the Alpha WS-820 involved in this? * Talk about the
I.C.T Provide SMT Production Line solutions with Automated Optical Inspection (AOI) AOI is short for Automated Optical Inspection, which is widely used in the electronics industry to check the appearance of PCBA assembly at the back end of the cir
Full Hot Air Lead-Free Reflow Oven With PC Temp Control System (A800) Introduce: 1, Heating system adopts ETA patent heating technology 2, The use of imported large current solid state relay contact output, safe, reliable, equipped with a dedicated
SMTnet Express, April 7, 2022, Subscribers: 25,732, Companies: 11,564, Users: 27,174 Effect Of Vacuum Reflow On Solder Joint Voiding In Bumped Components Voids affect the thermal characteristics and mechanical properties of a
Effects of reflow profile and thermal conditioning on intermetallic compound thickness for SnAgCu soldered joints. Effects of reflow profile and thermal conditioning on intermetallic compound thickness for SnAgCu soldered joints. The purpose
PCB Libraries, Inc. | https://www.pcblibraries.com/Forum/topic2593&OB=DESC.html
. However, the best practice is to locate the polarity indicator outside the package so that it is visible after the assembly process to allow the end user to visually validate that the assembly
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2018/06/593950_OvenSetupWizard_80xx_RevC-1.pdf
: Software version 8.0.0.9 May-2016 Page 1 of 44 After installing oven workstation software, the first step is to run the Oven Setup Wizard program and configure the oven model and installed options
winsouce.jpg)