.png)
Features & Benefits: One platform solution for any kind of production Commonality with existing equipment Linear motor drive increases reliability and reduces maintenance Wide component capability from 0402 (01005) chips to 90 x 100mm on up to 18" x
Refurbished YAMAHA YV100xg Pick and Place Machine Machine Type YV100XG Substrate size M type L460 * W335 (MAX) -L50 * W50 (MIN) L type L460 * W440 (MAX) -L50 * W50 (MIN) Mounting accuracy Absolute
Electronics Forum | Thu Jun 09 09:08:09 EDT 2005 | russ
It's normal for us when we review design. We have found that in the Y axis we need .015" whereas in the X axis we can use .005" spacing. this relates to our nozzle size vs. pickup skew etc... This wouldn't apply if there are parts taller than XXX
Electronics Forum | Wed Jul 20 22:46:41 EDT 2005 | nozzles
we can supply nozzle for varies machine brand,such as fuji,sanyo and so on. welcome to inquiry that!thanks vera http://www.hkenterprise.com/szcomfaje tel:86-755-28091605 ext.805 eskimy1001@gmail.com
Used SMT Equipment | Chipshooters / Chip Mounters
2000 Fuji CP-643E SMT Pick & Place Approx Dimensions: 16'2" x 78" x 76" Location: Jasper, IN USA Serial: 1396 Features: o 4800 Vision Card o Narrow and Wide Camera o Capable of 0402 Component part placement o Pam Data Provided o Copy of Machine Prope
Used SMT Equipment | Chipshooters / Chip Mounters
1999 Fuji CP-643E SMT Pick & Place Approx Dimensions: 16'2" x 78" x 76" Location: Jasper, IN USA Serial: 1108 Features: o 4800 Vision Card o Narrow and Wide Camera o Capable of 0402 Component part placement o Pam Data Provided o Copy of Machine Prop
Industry News | 2012-04-06 15:32:39.0
GPD Global, a manufacturer of precision fluid dispensing systems for high-volume 24/7, low-volume/high-mix and R&D production, announces the global release of its PCD4 Dispense Pump after its successful release and testing in the North American market.
Industry News | 2010-12-07 14:53:07.0
GPD Global announces that its Positive Cavity Displacement (PCD) technology is proven with silver-filled electrically and thermally conductive adhesives.
Parts & Supplies | Pick and Place/Feeders
YAMAHA YV100II 31 Nozzle ( 0402 X-Small) Pls kindly contact with us at any time, if you are insterest more info about products. Website : www.ksunsmt.com Email: jenny@ksunsmt.com Skype:jenny@ksunsmt.com MP: 0086-15629932323 What's app: 1562993
Parts & Supplies | SMT Equipment
Yamaha YV100ll 31A nozzle for 0402 component Email: jenny@ksunsmt.com Skype:jenny@ksunsmt.com MP: 0086-15629932323 What's app: 15629932323
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Technical Library | 2023-07-22 02:26:05.0
Patch offset; Uneven patches throughout the substrate (each substrate is offset in a different way); Only part of the substrate is offset; Only certain components are offset; The patch Angle is offset; Component absorption error; Laser identification (component identification) error; Nozzle loading and unloading error; Mark (BOC mark, IC mark) identification error; Image recognition error (KE-2060 only); Analysis of the main reasons for throwing material. More information about KINGSUN please Contact US at jenny@ksunsmt.com or visit www.ksunsmt.com
Panasonic CM602 Pick and Place Machine If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included allof our products. Pick and place machine, SMT pick and place m
Panasonic AM100 SMT Pick and Place Machine If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included allof our products. Pick and place machine, SMT pick and place machine
Career Center | , | Engineering,Production
Project Management, SMT Process Engineering
SMTnet Express, May 21, 2015, Subscribers: 22,770, Members: Companies: 14,358, Users: 38,224 Beyond 0402M Placement: Process Considerations for 03015M Microchip Mounting Brent Fischthal, Michael Cieslinski; Panasonic Factory Solutions Company
Lewis & Clark | http://www.lewis-clark.com/product-tag/fnc-nozzles/
FNC nozzles Archives - Lewis and Clark Skip to content My Cart: 0 View Cart Checkout No products in the cart. Subtotal: View Cart Checkout Lewis and Clark We Discover Equipment Opportunities NH: 603-594-4229 FL: 813-888-7436 sales@lewis
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/products/dispense-tips-and-needles
Industrial Dispensing Needles and Nozzles | Nordson Nordson Corporation Global Directory | Languages NASDAQ $203.58 +2.76 Our Products Our Industries Our Applications Brands
.gif)
