Industry Directory | Manufacturer
A leading manufacturer of packaging products for the surface mount component industry.
New Equipment | Board Handling - Storage
Low Cost PCB Transport Racks for up to 50 Printed Circuit Cards of up to 18" (460 mm) deep are made of antistatic material. Side plates can be adjusted from 5.9" (150mm) to 13" (330 mm).Use in TKD Inserter. Specifications: Size: 15.7"D X 18"W X 2
Supplying full range of the wafer shipper from 150mm to 300mm for both silicon wafer and solar wafer; wafer's foam and wafer's separator
Electronics Forum | Thu Feb 22 23:14:08 EST 2007 | vshan
v4.03 yes ul protocol under manual currently we are running with only one product Board width is 150mm
Electronics Forum | Tue Aug 23 15:27:38 EDT 2005 | Frank
I know this post is getting a bit old, but the Juki KE-2060 can do 0201 up to 74mm square (or up to 150mm long connectors) on their standard machine. You only need to purchase the 0201 nozzle and feeder. The machine is factory set to run 0201. And
Used SMT Equipment | Pick and Place/Feeders
MC389CY-F3-V MC-389 High-Speed, High-Mix Pick & Place WITH CONVEYOR Heavy-duty, welded steel base frame w/ adjustable foot pads High-precision ball screw X-Y drive mechanism w/ linear encoders Three pick and place heads, each with servo-drive
Used SMT Equipment | Pick and Place/Feeders
Heavy-duty, welded steel base frame w/ adjustable foot pads High-precision ball screw X-Y drive mechanism w/ linear encoders Three pick and place heads, each with servo-driven Z- and ?-axis motors Standard on-the-fly vision alignment cameras for c
Industry News | 2011-04-04 16:04:36.0
Count On Tools introduces the Fuji NXT Nozzle Series. The series includes all standard nozzles for the H01, H02, H04, H08 and H12HS Fuji heads.
Industry News | 2018-03-22 21:11:24.0
Nordson ASYMTEK introduces the new Helios™ SD-960 Series Automated Dispensing System for medium and bulk volume deposits of single- (1K) and two-component (2K) materials in electronics manufacturing and printed circuit board assembly. The Helios system is ideal to deposit volumes greater than 1cc, and line widths and dots that exceed 1mm, but it can deposit volumes down to 0.3cc and line widths as narrow as 0.3mm. The system supports highly abrasive thermal interface materials (TIM), silicones, epoxies, and grease for applications such as potting, sealing, gasketing, and structural adhesives.
Parts & Supplies | SMT Equipment
SAMSUNG SM421S Tray Exterior Dimension; 300 x 345 x 150mm Machine model compatible-- SAMSUNG SM421S Jenny@ksunsmt.com
Parts & Supplies | Pick and Place/Feeders
Panasonic SMT Stick Feeder Specs: 5 Input Channels Stick Width 150mm Overall size : 350 x 150 x 60 mm Voltage: 110V Model Compatible: MPA40 / MPA80 / MPA3 / MPAG1 / MPAV series
Technical Library | 2019-04-18 21:53:04.0
IPX9K Rain Spray Test Chamber(high Pressure high temperature water jet) simulates the use of pressure washer steam cleaning onto the enclosure, It is recognised as the harshest of all ingress protection tests. However the requirement is becoming more prevalent across many industries. Test method for IPX9K : Make sure the water temperature inside the water tank +80°C, water flow rate with 14L-16L per min, water pressure: 8000 Kpa -10000 Kpa (80–100 bar) at distance of 100mm~ 150mm, The test duration is 30 seconds in each of 4 angles, total spray testing time is 2 minutes. IPX9 rain test chamber applicable standards: IEC 60529 – Degrees of protection provided by enclosures (IP Code).Here is working principle in picture.
Technical Library | 2019-05-08 01:46:32.0
IPX9K Rain Spray Test Chamber(high Pressure high temperature water jet) simulates the use of pressure washer steam cleaning onto the enclosure, It is recognised as the harshest of all ingress protection tests. However the requirement is becoming more prevalent across many industries. Test method for IPX9K : Make sure the water temperature inside the water tank +80°C, water flow rate with 14L-16L per min, water pressure: 8000 Kpa -10000 Kpa (80–100 bar) at distance of 100mm~ 150mm, The test duration is 30 seconds in each of 4 angles, total spray testing time is 2 minutes. IPX9K rain test chamber applicable standards: IEC 60529 – Degrees of protection provided by enclosures (IP Code).Here is working principle in picture. Application: It is mainly suitable for testing the performance of shell and seal of electrical and electronic parts, automobile parts and seals under the condition of dripping rain to prevent Rain Water from permeating or working after drizzling.
Increase productivity, improve quality, reduce costs with vertical format curing solutions from Heller Industries. Learn more: http://www.hellerindustries.com/755-Vertical-Oven.php
FUJI-XP-243E 1. Multifunctional, high-speed, high-precision, compact design holographic small universal placement machine; 2. Mount 0603 (0201) chip; 3. Expand the number of nozzles stored, and you can always have nozzles or mechanical fixtures
Heller Industries Inc. | https://hellerindustries.com/parts/7500k/
7500K - Heat Shrink Tube 150mm for 3" hose- (FT) Phone 1-973-377-6800 Company About News Events New Equipment Convection Reflow Ovens Reflow Oven MK7 -New
KD Electronics Ltd. | http://www.kundasmt.com/a/PRODUCTS/4374.html
=150mm GUIDE PROFILE L=150mm PREVIOUS： 03081586-01 NEXT： 03081718S01 RELATED PRODUCTS CATEGORIES ABOUT US + SURFACE MOUNT SYSTEM + REFLOW FURNACE + OTHER PARTS + CONTACT US + CONTACT US Tel: 0086-512-86883013 Fax
