Industry Directory: 2 passes (29)

Count On Tools, Inc.

Count On Tools, Inc.

Industry Directory | Manufacturer of Assembly Equipment / Manufacturer of Assembly Material / Pick and Place / Repair / Rework / Contract Manufacturer

COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.

ZK Electronic Technology Co., Limited

ZK Electronic Technology Co., Limited

Industry Directory | Assembly / Pick and Place / Test Services / Equipment Dealer / Broker / Distributor

ZK Electronic Technology Co., Limited professional in Surface-Mount Technology area and supports most major brands of electronic asembly equipments with a large selections of compatible SMT.

New SMT Equipment: 2 passes (1237)

Vertical Curing Oven - Heller 788

Vertical Curing Oven - Heller 788

New Equipment | Curing Equipment

Heller 788 In-line, Continuous Cure, Vertical Format Oven This elevator format oven utilizes vertical space to accomodate curing applications of up to 4 hours while only occupying 96" (2.5m) of floorspace. Perfect for underfill and encapsulant.

Heller Industries Inc.

DSP792 HALOGEN Zero, Water-Soluble, Lead Free Solder Paste

New Equipment | Solder Materials

Qualitek's Halogen Zero formulations exceed IEC acceptable industry standards and contain 0% ppm total halogens. DSP792 exhibits excellent print definition. Good release is seen on 12-9 mil apertures. Will perform during continuous printing for u

Qualitek International, Inc.

Electronics Forum: 2 passes (406)

manual stencil print 2 passes

Electronics Forum | Mon Dec 22 12:14:15 EST 2008 | pcbbuilders

we sometimes have problems with solder paste release. we use a manual stencil printer. does anyone have any thoughts on using two passes of solder paste on the stencil? i have found that running the second pass gives me better deposits on the fine pi

manual stencil print 2 passes

Electronics Forum | Tue Dec 23 14:45:06 EST 2008 | comatose

One thing that helps is to divide large pads into a series of smaller pads. This prevents the scooping you're talking about.

Used SMT Equipment: 2 passes (121)

Panasonic CM 402 L C Type with tray towe

Panasonic CM 402 L C Type with tray towe

Used SMT Equipment | Chipshooters / Chip Mounters

CM402-L-C-Set - model: KXF·4Z4C - ADVANCED MODULAR PLACEMENT MACHINE CUTTER UNIT SMEMA (950MM PASS-LINE) REMOVABLE SUPPORT PIN BLOCKS SINGLE CONVEYOR UNIT (4) KXFX036PAOD - GANG-EXCHANGE FDR CART CM402/401/DT401 CM402-L C-TYPE

Capital Equipment Exchange

Ersa ERSA Versaflow 40/50 Selective

Ersa ERSA Versaflow 40/50 Selective

Used SMT Equipment | Soldering - Wave

Options: (1) IR-preheating, bottom side segmented pin/chain and roller conveyor for versaflow with double soldering module programmable conveyor width adjust (4) convection preheating top side automatic solder wire feeder, solder

Capital Equipment Exchange

Industry News: 2 passes (262)

Global Leader in Inspection Technology to Present at the California Reliability Workshops

Industry News | 2016-05-31 22:02:28.0

MIRTEC, “The Global Leader in Inspection Technology,” is pleased to announce its sponsorship and participation in the Northern and Southern California Reliability Workshops. The Northern CA workshop is scheduled to take place Thursday, June 9th at the Embassy Suites by Hilton Milpitas Silicon Valley. The Southern CA workshop will take place Tuesday, June 7th at the Green Dragon Tavern and Museum in Carlsbad, CA. Brian D’Amico will present “The Electronics Manufacturing Industry Requirement for 2D and 3D Inspection Technology.”

MIRTEC Corporation

Seika to Bring the Industry’s Top Manufacturing Equipment to SMTAI

Industry News | 2017-08-15 21:13:12.0

Seika Machinery today announced plans to exhibit in Booth #715 at SMTA International, scheduled to take place Sept. 19-20, 2017 at the Donald Stephens Convention Center in Rosemont, IL. Seika will showcase a complete line up of leading-edge equipment, including the McDry DXU-401DP Pass Through Dry Cabinet, SAYAKA CT23NQ PCB Router, UNITECH UC-250M-CV PCB Board Cleaner, MALCOM RCX Series and PCU-02V Spiral Viscometer. All equipment purchased on the show floor will receive special show pricing.

Seika Machinery, Inc.

Parts & Supplies: 2 passes (45)

Panasonic NPM pass sensor single line N510039140AB

Panasonic NPM pass sensor single line N510039140AB

Parts & Supplies | Assembly Accessories

NPM pass sensor single line N510039140AB NPM pass sensor single line N510039140AB KXFE00F3A00 CPU board N610087118AA(SCV1ER)/N610012075AA//N610087118AB/N610012076AA/N610087117AA/(KXFE000RA00-SCV1EJ),SCV1EK(SCV1EX-4) N610009178AA memory boaed N61

CNSMT CO.LTD

Samsung SM FEEDER smt feeder cart for samsung

Samsung SM FEEDER smt feeder cart for samsung

Parts & Supplies | Pick and Place/Feeders

SM FEEDER smt feeder cart for samsung Product Name:SAMSUNG SM smt feeder storage cart Dimensions(mm):930*600*1170 Product Description:40 / Layer, 2 Layers Uses: For placing feeder,feeder preparation in advance,Feeder Turnover store,Increase p

ZK Electronic Technology Co., Limited

Technical Library: 2 passes (342)

Throughput vs. Wet-Out Area Study for Package on Package (PoP) Underfill Dispensing

Technical Library | 2012-12-17 22:05:22.0

Package on Package (PoP) has become a relatively common component being used in mobile electronics as it allows for saving space in the board layout due to the 3D package layout. To insure device reliability through drop tests and thermal cycling as well as for protecting proprietary programming of the device either one or both interconnect layers are typically underfilled. When underfill is applied to a PoP, or any component for that matter, there is a requirement that the board layout is such that there is room for an underfill reservoir so that the underfill material does not come in contact with surrounding components. The preferred method to dispensing the underfill material is through a jetting process that minimizes the wet out area of the fluid reservoir compared to traditional needle dispensing. To further minimize the wet out area multiple passes are used so that the material required to underfill the component is not dispensed at once requiring a greater wet out area. Dispensing the underfill material in multiple passes is an effective way to reduce the wet out area and decrease the distance that surrounding components can be placed, however, this comes with a process compromise of additional processing time in the underfill dispenser. The purpose of this paper is to provide insight to the inverse relationship that exists between the wet out area of the underfill reservoir and the production time for the underfill process.

Nordson ASYMTEK

Utility of Dual Applicators for Non-Atomized Conformal Coating to Improve High-Volume Manufacturing Optimization

Technical Library | 2017-12-07 10:35:50.0

Electronics manufacturers protect their circuit boards with conformal coatings. Conformal coatings serve as a barrier from environmental hazards and internal shorts, tin whiskers, and corrosion at the board level. Within conformal coatings different material chemistries specialize in shielding from an array of hazards and can be applied by multiple methods. The most common method is atomized spray which disperses the material into a fine mist. Alternatively, non-atomized coating controls the materials' dispense shape while maintaining the original liquid form. While some applications demand atomized spray and other scenarios overlap between atomized and non-atomized coating, this paper focuses on the circumstances where materials are ideally suited for non-atomized, selective coating.

Nordson ASYMTEK

Videos: 2 passes (95)

This elevator format oven utilizes vertical space to accomodate curing applications of up to 4 hours while only occupying 96" (2.5m) of floorspace. Perfect for underfill and encapsulant.

This elevator format oven utilizes vertical space to accomodate curing applications of up to 4 hours while only occupying 96" (2.5m) of floorspace. Perfect for underfill and encapsulant.

Videos

Heller 788 In-line, Continuous Cure, Vertical Format Oven This elevator format oven utilizes vertical space to accomodate curing applications of up to 4 hours while only occupying 96" (2.5m) of floorspace. Perfect for underfill and encapsulant.

Heller Industries Inc.

Panasonic CM402-L C with tray tower

Panasonic CM402-L C with tray tower

Videos

Flexible and fast, the Panasonic CM402-L C is one of the worlds most popular smt placement machines. With just 5 feeders for the whole component range, it is highly efficient and reliable. Available for sale, fully functional and complete, from the

Capital Equipment Exchange

Training Courses: 2 passes (15)

IPC/WHMA-A-620 Specialist (CIS) Certification Training Course

Training Courses | | | IPC/WHMA-A-620 Specialist (CIS)

The Certified IPC/WHMA-A-620 Specialist (CIS) training focuses on cable and wire harness fabrication and installation.

Blackfox Training Institute, LLC

IPC-A-610 Specialist (CIS) Recertification Course

Training Courses | | | IPC-A-610 Specialist (CIS) Recert.

The Certified IPC-A-610 Specialist (CIS) recertification courses are intended for those individuals who were previously certified as IPC-A-610 Specialists.

Blackfox Training Institute, LLC

Events Calendar: 2 passes (4)

IPC A-610 Instructor Recertification

Events Calendar | Tue Jan 06 07:30:00 EST 2015 - Wed Jan 07 16:00:00 EST 2015 | Rolling Meadows, USA

IPC A-610 Instructor Recertification

BEST Inc.

IPC A-610 Instructor Recertification

Events Calendar | Tue Mar 17 07:30:00 EDT 2015 - Wed Mar 18 16:00:00 EDT 2015 | Rolling Meadows, USA

IPC A-610 Instructor Recertification

BEST Inc.

Career Center - Resumes: 2 passes (41)

Engineer- SMT

Career Center | , | 2013-01-31 04:29:34.0

• Programming of AOI, SPI and Routing m/c’s. • SMT(Surface Mount Technology) • Basic Electronics • Semi Conductors • Operating System: Windows- 98/XP/Vista/7 • MS Office: 2003/2007/2010

Engineer- SMT

Career Center | , | 2013-01-31 04:45:28.0

• Programming of AOI, SPI and Routing m/c’s. • SMT(Surface Mount Technology) • Basic Electronics • Semi Conductors • Operating System: Windows- 98/XP/Vista/7 • MS Office: 2003/2007/2010

Express Newsletter: 2 passes (893)

SMT Express, Volume 2, Issue No. 1 - from SMTnet.com

INSERT INTO tracking_express (userid, username, page_id, ts) VALUES ('#Quser_profile.id#', '#Quser_profile.username#', 8, (#ts#)) SMT Express, Volume 2, Issue No. 1 - from SMTnet.com Volume 2, Issue No. 1 Thursday, January 20, 2000

Aiming for High First-pass Yields in a Lead-free Environment

Aiming for High First-pass Yields in a Lead-free Environment Aiming for High First-pass Yields in a Lead-free Environment While the electronics manufacturing industry has been occupied with the challenge of RoHS compliance and with it, Pb

Partner Websites: 2 passes (54)

GenRad 2287L - Lewis and Clark

Lewis & Clark | http://www.lewis-clark.com/product/genrad-2287l-2/

– Printer Condition: The system is complete, clean, fully operational and passes all system diagnostics. Location: Tampa, FL USA Delivery

Lewis & Clark

PCB UV curing machine-PCB magazine loader,PCB Multi Magazine Loader,pcb conformal coating machine,PC

ASCEN Technology | https://www.ascen.ltd/Products/conformal_coating_equipment/586.html

radiation.PCB UV curing process is a chemical reaction when UV varnish or ink is applied to object and when it passes through UV light it gets cured instantly Send Enquiry Download brochure Product Details

ASCEN Technology


2 passes searches for Companies, Equipment, Machines, Suppliers & Information

Sm t t t t t t t t t t net
  1 2 3 4 5 6 7 8 9 10 Next