Electronics Forum | Thu Jul 05 09:09:40 EDT 2012 | stentech
you can contact me at rob@stentech.com I will have someone contact you and send you a quote. We have racks for 20 x 20 , 29 x 29, foils , Vectorguard etc. regards Rob
Electronics Forum | Fri Jun 15 18:22:49 EDT 2012 | stentech
Our lasers are accurate to +/- approx. 5 microns over 20 "X-Y. I have seen boards 18 x 24 stretch 7mils. I would agree with others, the only way is to send a board to you stencil vendor so they can edit the file to match the board. This is very commo
Electronics Forum | Mon Jul 16 12:19:00 EDT 2012 | jorge_quijano
Does anyone have experience with very large PCBs at Solder Paste inpection? our largest board is 32" x 22", it is a 0.250" thick and I was wondering if there is an Inline SPI for such dimensions. Currently I have a benchtop height measurement device
Electronics Forum | Tue Dec 04 05:02:50 EST 2012 | d0min0
Thank You for the feedback, I have contacted guys at DEK - and they are experienced with toolings and can help us out - the behaviour of our flex pcb is mystery, cause still in production...we are expecting firts samples beginning of 2013
Electronics Forum | Sat Jan 12 15:37:33 EST 2013 | mwac
If the machine is printing with an offset on all products, then yes the printer needs to be calibrated with the fixture. That particular model requires the same tools as the 500 and 1500. They were different from other MPM machines of that or prior
Electronics Forum | Mon Oct 28 11:42:40 EDT 2013 | davef
Two most important parameters are: * Solder temperature is the temperature of the solder * Dwell time is the time that the board remains in contact with the molten solder Several things that you should consider are: * First, here's how to design an
Electronics Forum | Mon Jun 29 15:10:10 EDT 2020 | spoiltforchoice
I would specifically look at the FLX2011 models with a V for vision (they otherwise come with Cyberoptics laser alignment as standard, although that would also work if you are not inspecting BGA balls). They come with software that I think is called
Electronics Forum | Sun Jul 28 16:11:40 EDT 2013 | jfs
Greetings! I run a small CM company in the > Midwest. We built our business on THT production > for the boutique music products industry and are > currently planning our launch of a > low-volume/high-mix SMT line to support the > growth of our
1 |