Industry News | 2019-04-23 12:05:35.0
Speed up your wire crimp process with the right tools. Quick and Convenient Wire Crimping with this portable bench top unit . A custom 2 position die made to specifications speeds up the production process for this double barrel connector housing. The housing with 2 barrel contacts is placed into the tooling nest, and one AWG 4 wire is placed into each contact. Stepping on the pneumatic foot pedal crimps both wires and contacts at the same time.
Industry News | 2019-09-06 14:46:04.0
THREE BLADE CHOICES FOR SINGULATING RECTANGULAR TAB ROUTED PCBS CLEANLY SINGULATE STANDARD AND FLEX CIRCUIT PANELS WITHOUT DUST Cleanly
Industry News | 2023-10-04 16:22:35.0
Re-sharpening blades is one way to get the most mileage out your equipment
Industry News | 2021-09-08 15:44:35.0
Singulating low volume tab routed PCBs to strict military specifications requires the right tool for the job. Now, with the benchtop PCB depaneling router from FKN Systek, applications requiring routing rather than punching are easily taken care of. This machine is also useful as a backup to high-speed programmable routers for short runs, and for separating thick back planes which cannot be singulated by other means.
Industry News | 2023-10-11 18:59:11.0
The N200 punch cleanly separates round and odd shaped panels without dust. Available for under $5,000 from FKN Systek, The N200 is a low cost top down air operated punch for singulating tab routed PCB Panels one tab at a time. This tool will cleanly separate FR4 or Metal Core PCBs . An upper and lower matching knife blade is used to pinch the tabs apart. ( for aluminum panels the blades are set to shear).
Industry News | 2017-01-13 13:44:13.0
Visit booth 410 at Apex 2017 to see the K5000 singulate multiple pre-scored PCB panels in one pass. Panels up to 10.4" wide can be separated by placing onto an input conveyor to be passed onto the separator blades. This is the ideal system for high volume in-line singulation of LED lighting strips
Industry News | 2018-06-14 12:10:52.0
Now available from FKN Systek, Stackable PCB Transport and Storage Racks made of conductive material for safe and convenient handling of Printed Circuit Cards during assembly. These Racks will hold up to 50 PCBs from 2” to 9.8” (5 to 25 cm) wide. Racks are made of conductive plastic temperature rated to 176 O F, Surface resistance
Industry News | 2019-09-13 14:36:50.0
L Shaped and flat rack trays hold 30 and 25 boards.
Industry News | 2023-09-21 18:54:27.0
FKN Systek will be represented by Wittco Sales in booth 724 726 at the Anaheim Electronics and Manufacturing show on September 27 and 28. On display will be the N100 nibbler for singulating tab routed PCBs. Information for the full line of PCB depaneling systems for V-Scored and Tab Routed boards will be available.
Industry News | 2017-01-25 16:39:34.0
Singulating tab routed printed circuit cards in low to medium volume production quantities is safe and easy with the N100 Nibbler from FKN Systek. Blades are available in standard thicknesses of .120”, .093” and .062”. Custom sizes to match the width of the routed section can be ground. Tabs are cut cleanly on each side so that no further clean up is required to remove excess material, as is often the case when using hand tools or when breaking the panels manually. In addition, since only one tab is cut at a time, minimal stress is imparted to the board during the process as the panel is not pressed between two points during the cut.
