Electronics Forum | Wed Aug 15 16:08:02 EDT 2001 | davef
A properly formed solder connection is stronger than the underlying copper to laminate bond. Measuring pad peal strength: IPC-TM-650, Method 2.4.21 for multiple solderings, use Method 2.4.8 for copper peal using an Instron machine. Typical requiremen
Electronics Forum | Tue Mar 29 09:54:20 EST 2005 | chon
Indy, Please refer to IPC-TM-650 TEST METHOD MANUAL Number 2.4.21.1, this is the closest written procedure I've found and used for this. I hope helps or if someone has any other input please advise. On more thing I have this file just let me know if
Electronics Forum | Wed Jun 12 08:13:29 EDT 2002 | davef
Don't sound proper. There is no specification. Pad peel strength test methods are: * IPC-TM-650, Method 2.4.21 for multiple solderings * IPC-TM-650, Method 2.4.8 for copper peel with a Instron machine. Typical requirement for Cu is: 6 lbf/in [1
Electronics Forum | Tue Mar 29 14:45:12 EST 2005 | davef
IPC-TM-650 TEST METHODS MANUAL Number 2.4.21.1 Subject: Bond Strength, Surface Mount Lands Perpendicular Pull Method 1 Scope This test method is used to determine the bond strength (breakaway strength) of surface mount lands from substrate materials
Electronics Forum | Tue May 23 20:39:37 EDT 2000 | Dave F
Scott: Sounds like fun: � Solder joint strength in pull/shear varies with lead geometry, solder volume, lead metal/metallization, and the test method. � Among things, IPC-TM-650 talks to getting pads off-of boards. For instance: Method 2.4.8 is for
Electronics Forum | Thu Jul 09 21:04:50 EDT 1998 | Dave F
| Hi there, | I am looking for some informations concerning the shear or pull strength of a typical TQFP 20 mils leads in relationship with the Copper/Tin intermetalic layer thickness. Could anyone help? | | Thank in advandce. | rgs, | chiakl Chiakl
Electronics Forum | Thu Jun 24 06:59:37 EDT 2021 | joost
This is what I do when I want certain feeders to stick to certain positions: put all my feeders on feeder slot 0. Then put the feeders I do not want to move to the feeder slot they are in (program to spot 4,21 or what ever feeders slot you want them
Electronics Forum | Mon Jun 11 21:56:41 EDT 2001 | davef
Continuing, I�ve optioned about the uselessness of shear testing of solder connections on this forum previously. So, the points that you make about the elusiveness of developing a standard for measuring solder connection strength is well taken. I�l
| 1 |
