ML-A410 SMT Automated Optical Inspection Machine Feature ▶Economical and practical AOI. ▶High precision detection platform design. ▶Fast programming debugging integration. ▶Automatic recognize the Tip and Bottom side. ▶Professional SPC system.
SMT Automatic Optical Inspection Machine ZMA410 Feature ▶Economical and practical AOI. ▶High precision detection platform design. ▶Fast programming debugging integration. ▶Automatic recognize the Tip and Bottom side. ▶Professional SPC system. Speci
Electronics Forum | Thu Feb 21 06:18:42 EST 2013 | cbeneat
We run 3 Vitronics XPM2's, our newest is 3 years, oldest is 6+ and I have not seen our rails warp the way you're describing. I would be plenty frustrated if I had to replace rails this often.
Electronics Forum | Fri Jun 24 08:47:14 EDT 2005 | grantp
Hi, There are many aspects to consider. 1. Firstly the room needs to be designed so it's sealed, so linoleum floors than curve where the wall meets the floor, so dirt does not get trapped in the corners, and mops get all dirt and pick it up. Floor
Used SMT Equipment | Adhesive Dispensers
Fuji GL541E *Basic Specifications Cycle time 0.09 seconds/dot Travel distance - X-axis within 8mm Y-axis within 6mm Needle up/down distance of 8mm Application time: 0.05 seconds Dispensing accuracy: +/- 0.15mm in th X and Y directions (3 sigma)
Industry News | 2001-02-26 11:18:45.0
Innovative Flextac Stencils simplify BGA rework. These self-sticking laser cut, polymer solder paste stencils use a residue-free adhesive similar to Post-it Notes to seal around BGA pads to ensure that solder paste will not bleed under the stencil when the paste is applied. Disposable Flextac Stencils are easy to use and will not leave any residue on the board surface.
ML-A410 SMT Automated Optical Inspection Machine Feature ▶Economical and practical AOI. ▶High precision detection platform design. ▶Fast programming debugging integration. ▶Automatic recognize the Tip and Bottom side. ▶Professional SPC system.
