| http://etasmt.com/cc?ID=te_news_bulletin,15961&url=_print
. The temperature of the SMT reflow oven zone is from 217 ° C to Tmax to 217 ° C, and the entire interval is maintained at 60 to 90s
| https://www.eptac.com/soldertip/soldertip-49-calibration-of-soldering-irons/
. It states: Temperature controlled soldering equipment (at rest) should be controlled within (+/- 5 degrees C [+/- 9 degrees F]) of the idle tip temperature. Constant output (steady output
| http://etasmt.com/te_news_bulletin/2020-05-04/15961.chtml
. The temperature of the SMT reflow oven zone is from 217 ° C to Tmax to 217 ° C, and the entire interval is maintained at 60 to 90s
| http://etasmt.com:9060/te_news_bulletin/2020-05-04/15961.chtml
. The temperature of the SMT reflow oven zone is from 217 ° C to Tmax to 217 ° C, and the entire interval is maintained at 60 to 90s
GPD Global | https://www.gpd-global.com/co_website/pdf/pump/PCD-Dispense-Technology.pdf
+40 non-condensing, air pressure 1 bar (14.5 psi) Medium temperature°C +10 to +40 Storage conditions°C Dry and dust free, -10 to
GPD Global | https://www.gpd-global.com/pdf/pump/PCD-Dispense-Technology.pdf
+40 non-condensing, air pressure 1 bar (14.5 psi) Medium temperature°C +10 to +40 Storage conditions°C Dry and dust free, -10 to
ORION Industries | http://orionindustries.com/pdfs/nomex410.pdf
°C. At higher temperatures and frequencies, the thicker papers have somewhat higher dissipation factors than those shown for the 0.25 mm (10 mil
GPD Global | https://www.gpd-global.com/co_website/pdf/coating/SimpleCoat-Operation-Guide-23100600.pdf
Temperature and Humidity The system should be operated within a range of 4° C - 41° C (39° F- 105° F) and at low humidity so no condensation forms on the system. Location The System must be placed in an area that is level, and away from standing water, overhead
GPD Global | https://www.gpd-global.com/co_website/pdf/doc/SimpleCoat-Series-Operation-Guide-23100600.pdf
areas. Operating Environment Temperature and Humidity The system should be operated within a range of 4° C - 41° C (39° F- 105° F) and at low humidity so no condensation forms on the system. Chapter 1. System overview 4 SimpleCoat Series Operation Manual
GPD Global | https://www.gpd-global.com/pdf/doc/SimpleCoat-Series-Operation-Guide-23100600.pdf
areas. Operating Environment Temperature and Humidity The system should be operated within a range of 4° C - 41° C (39° F- 105° F) and at low humidity so no condensation forms on the system. Chapter 1. System overview 4 SimpleCoat Series Operation Manual