500,000 components per hour Maximum Board Size: 22” x 20” (560mm x 510mm) Clearance: 2” (50mm) top and bottom Minimum Component Size: 0201; 01005 with high magnification option
500,000 components per hour Maximum Board Size: 18” x 20” (457mm x 508mm) Clearance: 2” (50mm) top and bottom Minimum Component Size: 0201; 01005 with high magnification option
Electronics Forum | Sat Mar 18 11:59:34 EDT 2017 | jchris
There are a few companies out there that manufacture lead forming/re-forming equipment. The equipment can effectively straighten the most bent-up leads. Fancort Industries is one of them, another is Hepco.
Electronics Forum | Thu Mar 02 13:59:38 EST 2017 | horchak
Slim chance it's the nature of the beast if in original unopened package. If handled by anybody not properly trained they will get bent. Allso make sure your pick and place is seating them into the paste, any lead not contacting the wet paste will be
Used SMT Equipment | AOI / Automated Optical Inspection
YesTech YTV-F1 Automated PCB Inspection System >Multi-function all purpose In-Line system • (2) Top-down Cameras; Incl. (1) High Magnification • (4) side viewing cameras • LED top light, bi-color multiangle LED lighting •
Used SMT Equipment | AOI / Automated Optical Inspection
YesTech YTV-F1 Automated PCB Inspection System >Multi-function all purpose In-Line system • (2) Top-down Cameras; Incl. (1) High Magnification • (4) side viewing cameras • LED top light, bi-color multiangle LED lighting •
Industry News | 2018-10-18 08:53:06.0
Mixed process of SMT reflow oven
Industry News | 2012-11-02 09:04:14.0
IPC and SMTA jointly announce the agenda for Session 5 of the High-Reliability Cleaning and Coating Conference, scheduled to take place November 13-15, 2012 at the Crowne Plaza Hotel – O’Hare in Chicago, IL.
500,000 components per hour Maximum Board Size: 18” x 20” (457mm x 508mm) Clearance: 2” (50mm) top and bottom Minimum Component Size: 0201; 01005 with high magnification option
500,000 components per hour Maximum Board Size: 22” x 20” (560mm x 510mm) Clearance: 2” (50mm) top and bottom Minimum Component Size: 0201; 01005 with high magnification option
| https://www.eptac.com/ask/gullwing-lead-deformation/
% of the diameter, width, or thickness of the lead.” So if the leads are damaged or bent more than 10% of the diameter, width, or thickness of the lead, they cannot be used
1st Place Machinery Inc. | http://www.firstplacemachinery.com/first_place_smt_pcb_aoi_mvp.html
. System can inspect SMT components pre-or post solder for presence / absence and placement verification (x,y,and theta ) polarity, solder fillet, bridging, solder opens, insufficient fillets, excess solder, and lifted leads
