Electronics Forum | Tue Jan 14 11:02:59 EST 2003 | soupatech
I found a feeder with a 2mm pitch and was told that although it was made for the CP4, it would work with the CP3. Before we throw out a thousand bucks, has anyone had experience loading parts off of a 2mm pitch tape with the CP3? The part is a 1.6
Electronics Forum | Tue Jan 14 15:38:28 EST 2003 | fujispares
Hi, CP3 will have trouble placing 0603 parts - I wouldn`t use a CP3 for these parts - A CP4 will be more suitable. A older CP4 feeder will fit and function on a CP3.
Electronics Forum | Tue Mar 30 10:43:21 EST 2004 | Robert
I could use some help too. I have a bunch of SMD 4 Pads Inductors from Central Technologies. The dimensions of the part is 11.30x13.9x6.9 . I've called four companies already and none were able to find a carrier for this part. These parts are on plas
Electronics Forum | Wed Sep 21 12:30:03 EDT 2005 | Rob
Hi Greg, We've used lots of machines over the years & seen lots of different tape related issues - the main one being snap off of the cover tape, usually due to too much glue, over entusiastic heat seal, or a feeder requiring maintainance. Also the
Electronics Forum | Thu Aug 27 13:56:27 EDT 1998 | Stefan Witte
| Where can I find a good tool to splice 8mm and 12mm paper and plastic part carrier tapes together? Siemens has a pretty good splice tool, which crimps a small brass strip into the tape. The cover tape has to be sticked together with a small strip o
Electronics Forum | Thu Aug 27 12:49:20 EDT 1998 | Frank S.
Where can I find a good tool to splice 8mm and 12mm paper and plastic part carrier tapes together?
Electronics Forum | Thu Jun 04 11:13:39 EDT 1998 | Justin Medernach
| Looking for vendors of splicing tape for 8,12 and 16mm tape and reel. | Any net sources? Mike, Give Siemens a call. They have a decent little system. It's comprised of thin metal fasteners that hold the carrier tape together via the holes, a crim
Electronics Forum | Thu Jun 04 10:00:11 EDT 1998 | Dave F
| Looking for vendors of splicing tape for 8,12 and 16mm tape and reel. | Any net sources? If you can use carrier (cover) tapes go see "Igmar Grewar 16:04:32 5/28/98" on SMTNet. Dave F
Electronics Forum | Thu Jun 04 10:17:09 EDT 1998 | Eric Jenkins
| | Looking for vendors of splicing tape for 8,12 and 16mm tape and reel. | | Any net sources? | If you can use carrier (cover) tapes go see "Igmar Grewar 16:04:32 5/28/98" on SMTNet. Dave F It is very difficult to splice carrier tape, we have tried
Electronics Forum | Thu Aug 27 13:55:09 EDT 1998 | Dave F
| Where can I find a good tool to splice 8mm and 12mm paper and plastic part carrier tapes together? Frank: Check the archives for Tesa and Siemens. Dave F