Electronics Forum | Wed Feb 20 11:48:18 EST 2013 | jrr3434
Hi, does anyone know what kinds of inspection this aoi can perform? Solder joints, lifted leads, shorts, etc. Any information would be helpful. thanks.
Electronics Forum | Wed Sep 30 18:44:43 EDT 1998 | Steve Gregory
Hi JVO, I just learned about a system from a company called CR technology... (there's still more I need to find out). But supposedly, they make a machine called the CRX2000 that is both a real-time xray and AOI machine all rolled into one. Wh
Electronics Forum | Thu Oct 06 09:42:57 EDT 2011 | vetteboy86
I've put a call in for some tech support. I haven't had much succes dealing with them in the past. If anyone is running this machine, any knowlege on my problem is much appreciated. Currently camera 3 (highest magnification) will not find fiducials
Electronics Forum | Thu Dec 21 08:45:40 EST 2000 | Hussman
I've been asked to "heat up the oven profiles" to "burn off" the excessive flux so our vision equipment can inspect solder joints. 1. I am using Multicore SN 63 no clean solder paste. 2. We use CR Technology Vision Inspection. Before I get too
Electronics Forum | Thu Jul 15 10:28:49 EDT 1999 | Boca
| I'm looking into vision inspection equipment to automatically inspect SMD placement and solder joint quality. Does anyone have any recommendations or know of any commonly used equipment? Do other manufacturers use vision systems at their inspecti
Electronics Forum | Fri Dec 22 09:39:22 EST 2000 | CAL
Some random Ideas when I read you post...... 1) If it works don't fix it. 2) Be aware of the temp threshold of your components....Over heating components is not good. Over heating is not good period. 3) The Solder paste Chemistry you are using maybe
Electronics Forum | Thu Jul 15 16:07:39 EDT 1999 | Doug
| | I'm looking into vision inspection equipment to automatically inspect SMD placement and solder joint quality. Does anyone have any recommendations or know of any commonly used equipment? Do other manufacturers use vision systems at their inspec
Electronics Forum | Thu Jun 20 05:09:41 EDT 2002 | mattiasw
I am running a VisionPoint AOI equip. from DiagnoSYS, and I have a question regarding the calibration of brightness on the cameras. When I run system Calibration to check the camra brightness I should have the following values: Cam#1=126 Cam#2=126
Electronics Forum | Wed Dec 02 09:00:23 EST 1998 | Dave F
| I am interested in inspection machines working with comparation, the results that I need for inspections are missing parts, component offset, polarized components, etc. The machine can work in line or off line. | | Thanks for help. Sergio. | Serg
1 |
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723