Electronics Forum | Sat Jun 13 09:36:46 EDT 1998 | RNLM
| Is cost an issue? I evaluated Siemens Siplace about a year ago and the price per placement was twice what Phillips Machinery has to offer. We too are a high mix/low PCb count shop. Also, Siemens has many hidden costs and the references I talked
Electronics Forum | Thu Apr 28 03:58:52 EDT 2022 | erici
We are having problems with our Siemens Siplace S27 machine. The machine is giving the error - Y-axis Faulty initialization of Motor. We replaced the Y motor card and swapped also the servo control cards on the two gantries. Still will not initiali
Electronics Forum | Fri Jun 26 00:36:28 EDT 2020 | victorzubashev
Hello Lazlo, do you still have a problem with the machine? Victor
Electronics Forum | Wed Sep 10 07:42:52 EDT 2008 | lloyd
Can you provide a bit more info on your machine setup. I not full fimilar with the S-27 so a few points may not be relevant to your machine. Are you using Siplace Pro. Are you using the standard GF for the 0201 component. Do you have the component
Electronics Forum | Tue Sep 09 16:10:15 EDT 2008 | davef
We don't know a Siemens S-27 Error Code from a shoe box, but our old friend Stefan Witte is wizard on Siemens machines. He has posted some troubleshooting guidance on his site. If that doesn't help; contact him, plead for mercy, and he probably will
Electronics Forum | Mon Mar 06 13:00:37 EST 2006 | global
We have a Siplace S15 and I would like to know if it is possible to make it skip a part during the placement operation with out aborting the job? In section 5.4.4.4 of the user's manual it describes how to set a track to empty and proceed on with the
Electronics Forum | Tue Oct 20 08:58:27 EDT 2009 | soudomphong
m/c error 3564 raceway monitoring triggered-gantry 3. In the help menu it says topic does not existed. Anybody has any idea what this error code mean? This is siemens hs60.
Electronics Forum | Sun Dec 05 17:13:32 EST 2021 | oxygensmd
There is a small round (endless) spring inside segment. I think it felt off or damaged. Replace it.
Electronics Forum | Tue Nov 30 19:57:54 EST 2021 | erici
May i know how you did the MC-distribution to the MC. I am having same problems with our machine now. Thanks
Electronics Forum | Tue Jun 23 13:50:05 EDT 2020 | dltechltd
505.05 SP2 Hotfix3 After this, we were able to work with the machine until 1 week and the machine broke again. A small zener diode exploded on a Servo card, and we replaced it. Next reboot, the MC system halted, because an SRBS error. We have aske
