Electronics Forum | Mon Apr 06 09:04:31 EDT 2015 | jesseoliveira
Hi all! I work in FA Lab on Brazil. Recently we had a problem with a dye pry analysis of BGA component due to breakage of WLP package (wafer level packaging). In this case, WLP thickness is about 0.28mm and was damaged during pullout process. Our
Electronics Forum | Wed Aug 28 10:16:12 EDT 2002 | Jim M.
Sam We install a lot of die in the SMT room using same process as SMT parts.Water soluble solder paste is used for attachment of die to ceramic and boards. Biggest problem i found is the adjustment from installing the die in the bonding area. The t
Electronics Forum | Wed Aug 11 18:36:03 EDT 2004 | davef
90 Knoop. Q2: Thickness is 4 to 10 u" for Au and 300 to 400 u" for nickel A2: This looks like a ENIG spec. Although, the Ni is quite heavy, 150 uin is sufficient for most applications. [IPC-4552 ENIG specification: * Gold thickness of 0.075 - 0.125
Electronics Forum | Sat Nov 22 09:27:18 EST 2008 | davef
IPC-HDBK-001 w/Amendment 1 Handbook and Guide to Supplement J-STD-001 (Includes J-STD-001B to C Comparison). During fabrication and storage, both components and PWBs will often absorb water. If left in the device, this water will vaporize at solderi
Electronics Forum | Fri Jul 27 12:21:18 EDT 2012 | tpatrickwalsh
I am posting this here because I think it may have something to do with PCBA: I have a simple battery-powered consumer product (LED light) that we have been manufacturing for some time. All of a sudden in one batch, we have about a 4% rate of a sing
| 1 |
.gif)
