Electronics Forum | Fri Mar 29 10:11:02 EDT 2019 | cyber_wolf
“For a number of years now, work has been proceeding in order to bring perfection to the crudely conceived idea of a transmission that would not only supply inverse reactive current for use in unilateral phase detractors, but would also be capable of
Electronics Forum | Wed May 16 15:40:56 EDT 2012 | davef
Here's some notes from a Bob Willis presentation Assembly of Flexible Circuits with Lead-Free Solder Alloy [Bob Willis leadfreesoldering.com] * Flexible Circuit Construction ** Base Material - 0.05mm Copper 18/18 um ESPANEX from Holders Technologies
Electronics Forum | Thu Aug 19 15:49:05 EDT 2004 | pjc
Hi Erhard, Go to http://www.globalstencil.com They are the stencil firm that worked with MPM for developing technology for printing with thick stencils that are milled out on the bottom to account for existing components on the top side of a PC boa
Electronics Forum | Thu Jun 21 22:04:18 EDT 2001 | davef
This is my attempt at beating the "Fuzzburg 7" translator used on the SMTnet Forum that mashes everything it sees. Below the next paragraph are three paragraphs,each with a common numering sequence, where each paragraph represents the columns of a t
Electronics Forum | Thu Aug 19 12:01:26 EDT 2004 | erhard
We want to get a process running to print paste with a thicker plastic stencil with some room left underneath for preassembled components. I know DEK offers these stencils but since we are using an MPM printer they don't want to sell to us stencils f
Electronics Forum | Wed Jul 27 09:58:05 EDT 2011 | davef
Pressure printing systems Conventional stencil printing techniques have fundamental limitations as regards paste handling: The volume of paste available for printing is limited, so frequent replenishment is necessary Paste is difficult to c
Electronics Forum | Mon Jan 27 10:09:33 EST 2020 | charliedci
Looks like a screen printed circuit using a platinum or palladium silver paste. This would account for the grainy appearance. I 've seen this on a white ceramic substrate but not on aluminum. Any components are attached using a silver conductive epox
Electronics Forum | Thu Jan 23 12:43:14 EST 2020 | pavel_murtishev
Hello, There is curious PCB technology used for one aluminum LED PCB. First of all there is no solder mask. PCB tracks look grainy and there is no fillet near components. Tracks near components are thicker. A kind of material has been applied to
Electronics Forum | Mon May 07 16:07:05 EDT 2012 | davef
Start with targets based on the stencil thickness (for height) and stencil thickness times the aperture size (for volume). * Set reasonable upper and lower control limits (+ 25% and –25 % of the targets, for example). * Next, check the printer set-u
Electronics Forum | Mon Jan 28 16:48:14 EST 2002 | djarvis
Printing with adhesives is no big deal so don't let the sales types try to mystify the process and convince you that they have the only stencils/adhesives/knowledge that can possibly get you through this "trying time" - at a price. Start with 0.010"
DONGGUAN KINGSUN AUTOMATION TECHNOLOGY CO.,LTD is a company which mainly provide used and new SMT parts, provide repair SMT key parts service,new/used SMT machine trading,SMT consumables and Peripherals equipment,Clean room, ESD..
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Distributor / Consultant / Service Provider
3th, Tangchang 3rd Road, Hengli, Dongguan City
Dongguan, China
Phone: 008615629932323