New Equipment | Solder Materials
Indium Corporation manufactures high quality solder powders and pastes. Powders are available in hundreds of alloys and a full range of sizes. Solder pastes can be made from these powders using a wide variety of flux vehicles to get the best fit for
New Equipment | Cleaning Agents
LONOX® L5314 is extremely effective on a wide range of soils including raw solder paste and fluxes built up on wave solder pallets yet mild enough on pallet hardware for repeated wash cycles. LONOX® L5314 can be used at ambient temperature and rinses
Electronics Forum | Wed Nov 11 23:45:53 EST 1998 | Mark D.
What are the factors that go into determining PCB Board temperature requirements for the Wavesolder process? Most of the recipes I've seen call for preheating the PCB to around 230F - 250F. This temp is about 210F - 230F below the typical solder temp
Electronics Forum | Mon Aug 25 15:40:58 EDT 2008 | dyoungquist
I am seeing poor quality solder joints, mostly on 0402 components. The problem is that while the pad on the pcb is getting fully wetted, the solder is not flowing up the sides of the 0402 component, i.e. the 0402 lead is somewhat de-wetting. The re
Industry News | 2018-10-18 08:59:34.0
PRINCIPLE OF SURFACE MOUNT PROCESS(SMT PROCESS)
Industry News | 2018-10-09 18:31:30.0
Whether in production, or repair and rework, the cost of soldering iron tips can be easily overlooked, but with today’s requirement for higher temperatures in lead-free solder applications, the consumption of tips has dramatically increased. This fact, combined with changes in tip design to meet the higher thermal load requirements, has also resulted in escalating tip costs, making tip care a high priority.
ECOCELL is a high end selective soldering system to integrate into lean-manufacturing concepts (U-Shape). Combined with VERSAEYE module + handlingssystem in front of the machine we ensure highest quality with highest throughput. ECOCELL ? https://www
ALPHA® Preforms with solder paste adds solder volume.
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/select/technologies-or-options/75-mm-wave-nozzle
. - Process parameters including travel speed, soak time and solder temperature are fully controllable for individual circuit boards. - Available for tin-lead or lead-free solder alloys with lead-free solder pot constructed of titanium for resistance to corrosive alloys
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2018/06/fluxless-reflow-1.pdf
• Fluxless reflow utilizes gas phase Formic Acid (HCOOH) to replace standard fluxing agents • Eliminates the need for pre-reflow fluxing and post- reflow flux cleanup steps