Electronics Forum | Mon May 21 20:55:19 EDT 2001 | dougk
We have both CP 4/2's and 4/3. We're also running Siemens S20's & F4's. The 4/3's vision is more temperamental and slightly harder to program. Machine startup and nozzle centering takes longer, but placement time is slightly better. Honestly, for wha
Electronics Forum | Wed Aug 04 18:34:34 EDT 2021 | Serge
Hello, We have a problem to start our CP643. When trying to start the machine, it returns "machine waiting for vision board" We already did exchange all the pc boards (Vision, computer, etc...) We also did exchange the camera and the machine still
Electronics Forum | Fri Aug 22 02:10:55 EDT 2014 | mdang
I wonder if anyone can help me with this problem. My FUJI CP65 with 0201 camera is working fine for a while. Now, it starts losing the vision on 0201 camera. The system will run for a while then I don't see the part on the part monitor when the nozzl
Electronics Forum | Mon Jan 23 10:06:17 EST 2006 | GCO
I would like to say sharing new parts only, it seems that we have a little problem teaching new BGA's or CSP's with actual vision system (very time consumming). - see FUJI site for an add-on off line unit if needed ($$$...HIC!). Any better solution o
Electronics Forum | Fri Jan 05 18:39:49 EST 2024 | madisreivik
Also, sometimes placing heads "skip" some rotation - component is little skewed on board but vision shows "correct" numbers. Probably some mechanical error ?
Electronics Forum | Thu Aug 05 20:33:48 EDT 2004 | Dhanish
The machine type is Fuji CP6.We have major issues with Network Resistor placement.The equipment guys often feedback there is a problem with nozzle and feeders.What will happened to the part if the Thickness data in the Part Data does not match the Pa
Electronics Forum | Sat Mar 03 13:33:22 EST 2007 | grantp
Hi, I have experience with both MYDATA and Fuji, and I agree totally, you have a MUCH better machine in the Fuji's than MYDATA machines. I had to sell off my MYDATA machines and I put in XP based machines. I just added another 143 to the line, and
Electronics Forum | Tue Dec 05 14:51:00 EST 2000 | JAX
Nick, In siemens terms: Fuji has the ability to check "ink spot" which I assume is what you are doing now. The only difference is the vision capabilities between the two machines. You do not have the freedom of siemens type gray scale with Fuji. Yo
Electronics Forum | Tue Dec 05 14:56:16 EST 2000 | JAX
Nick, In siemens terms: Fuji has the ability to check "ink spot" which I assume is what you are doing now. The only difference is the vision capabilities between the two machines. You do not have the freedom of siemens type gray scale with Fuji. Yo
Electronics Forum | Thu Dec 07 16:15:47 EST 2000 | JAX
It doesn't matter because on a dual dot both dots should be the same size. If one of the dots is to small and is not read by the vision system the dot is bad and the board will be skipped. You don't have to read the dual dot as a single item. With th
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
