Electronics Forum | Tue Aug 24 17:47:50 EDT 2010 | smtmax
I'm looking for CP6 fuji feeder. 16mm x 12mm (KO=8.3mm) 24mm x 20mm (KO=10.9mm) Please help! Thanks!
Electronics Forum | Thu Oct 02 10:43:37 EDT 2008 | msangabriel
I am looking for companies that fabricates special or custom SMT feeders for an Fuji IP3 machine. It is to feed a SMT terminal. Do you know of any company that you can recommend?
Electronics Forum | Wed Oct 26 11:02:17 EDT 2005 | Rob
I wouldn't say we've escaped either - Fuji blade wear is heavily up at the moment.
Electronics Forum | Wed Oct 26 10:21:28 EDT 2005 | russ
We are also experiencing problems with this thick stiff paper tape. Our problem is the strength of the spring that supports the tape at its pick position. After a while it just pushes it down because the tape exit wants to bend the tape too sharply
Electronics Forum | Fri Feb 29 09:28:56 EST 2008 | chrispink1
Anybody know what the connections are, and signalling requirements for fuji nxt feeders
Electronics Forum | Mon Mar 22 00:17:41 EST 2004 | D. Sanders
Alan, Fuji also has a standard motor feeder FMB-44 that should handle this component (believe the depth is right at 17mm for the feeder). This is the motorized feeder, not the old mechanical ones that they use to sell. D.
Electronics Forum | Fri Mar 05 00:53:09 EST 2004 | alwil
I have an Electrolytic capacitor which is 17mm in diameter and is 16.7mm in height. It is presented in a reel,44mm x 24mm. I want to know if there is a suitable feeder available to place this part onto a Fuji IP3. Thanks, Alan.
Electronics Forum | Tue Sep 21 11:22:20 EDT 2004 | rlackey
Hi Arvydas, Do you want a machine specified at 20K per hour or to run at 20K per hour? Regarding Chipshooters I've worked with Siemens, Philips FCM's, Fuji's, Panasonics & Sanyo/Universal and the best in terms of reliabilty by a long way were the J
Electronics Forum | Fri May 29 03:27:36 EDT 2009 | grantp
Hi, I have only handled MYDATA and Fuji personally. MYDATA was not realiable, Fuji's are perfect. As for feeders the XP series, we have 5 of them, and they all use the same feeders as the older machines such as CP and IP series. The XP can even use
Electronics Forum | Tue May 26 00:22:35 EDT 2015 | hemantp
help required for understanding correct nozzle for the fuji feeder ( CP642 or QP242 )mounting of the SMT Pogo pins ( single Pin ) The Part nos are 1. P/N : HCS0712SM01-B20150507 (Female pin) and 2. P/N : N005M1-01C000CR (Male pin).