Electronics Forum | Mon Apr 16 12:59:51 EDT 2001 | Mike R
If you will place a temperature strip on the board during wave soldering process you will get a max of 210 F or 98.8 C which is normal on the standard wave temperature. The problem on the 10% solder on the TH via hole can be caused by insufficient fl
Electronics Forum | Thu May 22 09:59:54 EDT 2003 | russ
You also would want to talk with your flux supplier. They are usually knowledgeable in the proper application of and heating of their fluxes. Usually, insufficient solder in a wave process is related to insufficient preheat,dwell time, and flux app
Industry News | 2022-11-11 07:33:41.0
Lyra Reflow Oven is a soft soldering that realizes the mechanical and electrical connection between the solder ends of surface mount components or the pins and the printed board pads by remelting the solder paste pre-distributed on the printed board pads.
Industry News | 2018-10-18 09:37:27.0
How To Set Profile In SMT Reflow Oven
Lyra Reflow Oven is a soft soldering that realizes the mechanical and electrical connection between the solder ends of surface mount components or the pins and the printed board pads by remelting the solder paste pre-distributed on the printed board
| https://www.eptac.com/faqs/soldertips/soldertip/soldertip-36-wave-soldering-insufficient-fill-and-voids-in-pth
SolderTip #36: Wave Soldering Insufficient Fill and Voids in PTH - EPTAC - Train. Work Smarter. Succeed Looking for solder training standards, manuals, kits, and more
| http://etasmt.com/cc?ID=te_news_bulletin,23569&url=_print
. Solder mask can be used to control the flow of solder down a trace. A proper heating profile, particularly with a controlled preheat is a remedy to differential heating
