Electronics Forum | Tue May 22 19:28:31 EDT 2012 | Rick Thompson
Are there any established acceptance criteria for contaminants based on Ion Chromatography testing? I've found some references to certain levels for some contaminants but there doesn't seem to be any industry consensus. Any feedback or reference to l
Electronics Forum | Mon Jan 21 19:22:38 EST 2008 | davef
In your situation, the issue is the compatibility of your flux residues and the encapsulant that you choose. First, contact your encapsulant supplier for advice. They've likely been down this road with other customers and may be able so save you som
Electronics Forum | Thu Dec 16 09:59:47 EST 2004 | saragorcos
Hi there - unfortunately, there are no good cleanliness specs available mainly because clealiness requirements are case sensitive - you should talk to Terry Munson at 765-457-8095 - he can definitely give you advice on Ion Chromatography, SIR, ROSE t
Electronics Forum | Thu May 26 19:32:13 EDT 2005 | Mike Konrad
Three popular methods: Resistivity of Solvent Extract (ROSE) Test Method IPC-TM-650 2.3.25: The ROSE test method is used as a process control tool to detect the presence of bulk ionics. The IPC upper limit is set at 10.0 *g/NaCl/in2. This test is p
Electronics Forum | Thu Apr 14 09:39:41 EDT 2011 | blnorman
ROSE has the advantage in that it does have a specific acceptance criteria (J-STD-001), whereas the IC does not. ROSE allows the test to be run at ambient or at an elevated temp, IC requires the component/board/assembly to be "cooked" for 1 hour @ 8
Electronics Forum | Tue Apr 12 15:50:14 EDT 2011 | cstev112
New to using Ion Chromatography (IC)testing to understand cleanliness of PCB. I've been informed that one method to monitor is to use R/O/I. What is R/O/I?
Electronics Forum | Wed Apr 13 09:42:58 EDT 2011 | cstev112
Thanks for the reply. R/O/I is ROSE / Omegameter / Ionograph which is used as a baseline for Ion Chromatography.
Electronics Forum | Thu May 31 21:43:44 EDT 2012 | davef
edmaya33, you're correct about what J-STD-001E says, but recognize that the measure that you refer us to in not IC [Ion Chromatography]. It is modified ROSE [Resistivity of Solvent Extract] ... or whatever they call modified ROSE now-a-days
Electronics Forum | Fri Jun 05 10:24:56 EDT 1998 | Earl Moon
| I have just been assigned to look into the ionic chromotograhy test on our PCBA but I have zero knowledge. Could anyone help to explain what is this test about? Is it | a) a destructive test? | b) What is the measurement unit of this test? | c) Wh
Electronics Forum | Mon Jun 25 03:52:24 EDT 2012 | awtm
Our Customer had detected tarnished pad on ImAg PCBA and had conducted several SEM-EDX test at the soldermask below some of the chip resistors. High concentration of sulfur was found and it can be significantly reduced after further chemical cleaned