New Equipment | Education/Training
This 4-day, lectured course utilizes the images in the IPC-A-610 document to provide visual accept/reject criteria examples for all three classes of assembly production–for both lead and lead-free. The IPC-A-610, “The Acceptability of Ele
New Equipment | Education/Training
This 3-day, lectured course utilizes the images in the IPC-A-610 inspection document to provide visual accept/reject criteria examples for all three classes of assembly production–in both lead and lead-free. The IPC-A-610, “The Acceptabil
Electronics Forum | Tue Feb 14 09:10:43 EST 2017 | davef
Assuming the traces run parallel and perpendicular to each other, I'd choose one direction the traces run as "x" and the other direction for "y." Then I'd pick a unique identifier on the board to insure proper orientation. Next, I'd measure warp and
Electronics Forum | Mon Feb 13 23:05:02 EST 2017 | swestheimer
I have been asked a very good question but have not been able to find a good answer. IPC for both PCB and PCBA refer to the X & Y dimensions to measure warp and twist but how would you determine the warp and twist for a round PCB or PCBA?
Used SMT Equipment | Chipshooters / Chip Mounters
JUKI FX-3 Pick and Place machine Specification Substrate dimension: L- substrate-(410×360mm) L-wide substrate-(510×360mm)*1 XL substrate-(610×560mm) Component Height:6mm size Component range : laser discrimination radar system,0402(British 01005) ~
Used SMT Equipment | Pick and Place/Feeders
JUKI FX-3 Pick and Place machine Specification Substrate dimension: L- substrate-(410×360mm) L-wide substrate-(510×360mm)*1 XL substrate-(610×560mm) Component Height:6mm size Component range : laser discrimination rada
Industry News | 2020-05-27 15:54:35.0
Blackfox is opening its facilities to in-person training for the electronics manufacturing industry with a thorough and documented safety plan for all. If preferred, Blackfox is also offering online IPC training and certification in either English or Spanish from the comfort of your home or office.
Industry News | 2009-06-16 12:26:28.0
New Five-Day Class Teaches Practical as well as Lecture
Technical Library | 2019-06-21 10:39:15.0
Recently, an ACI Technologies (ACI) customer called to discuss failures that they had observed with some through-hole capacitor parts. The components were experiencing failures following vibration and accelerated stress testing. Upon receipt of the samples, ACI performed three levels of inspection and Energy Dispersive Spectroscopy (EDS) testing to investigate the root cause of the failures. These analyses enabled ACI to verify the elements comprising the solder joints and make the following recommendations in order to prevent future occurrences. The first inspection was to investigate the capacitor leads using optical microscopy, and no anomalies were found that could indicate bad parts from the vendor or improper handling prior to assembly. However, vertical fill in the barrel of the plated through-holes was too close to the IPC-A-610 minimum specification of 75% to determine a pass/fail condition, and therefore required further investigation.
This 4-day, lectured course utilizes the images in the IPC-A-610 document to provide visual accept/reject criteria examples for all three classes of assembly production–for both lead and lead-free. The IPC-A-610, “The Acceptability of Ele
BEST, Inc. is an authorized IPC Training Center and offers the IPC-A-610C Certified Instructor Program. Students who complete the program are considered Class "A" Instructors and are qualified to teach the 2 day Worker Proficiency training and certif
Training Courses | | | PCB Rework and Hand Soldering Courses
The PCB rework and hand soldering courses courses cover techniques of rework and repair of PCBs, BGAs and other electronics assemblies, and teach fundamentals of soldering of electronics assemblies.
Events Calendar | Tue Sep 10 00:00:00 EDT 2019 - Tue Sep 10 00:00:00 EDT 2019 | Huntsville, Alabama USA
IPC Tech Ed - Process and Acceptability Requirements: Utilizing J-STD-001 and IPC-A-610 Together
Events Calendar | Tue Dec 03 00:00:00 EST 2019 - Tue Dec 03 00:00:00 EST 2019 | Anaheim, California USA
IPC Tech Ed - Process and Acceptability Requirements: Utilizing J-STD-001 and IPC-A-610 Together
Career Center | Orlando, Florida USA | Production
Position Summary: Build through-hole (THT) and surface mount (SMT) printed circuit board assemblies, placing components on boards per controlled parts lists, drawing documentation and quality workmanship guidelines. Position reports to: Group Lea
Career Center | Milpitas, California USA | Clerical,Production,Quality Control,Research and Development,Technical Support
Winslow Automation, Inc. (aka Six Sigma), an industry leader in electronic component interconnect technology & related test and failure analysis services, is seeking a ‘hands on’ Materials Engineer to join our Test services team. This individual wi
Blackfox Training Institute, LLC | https://www.blackfox.com/ipc-certification/ipc-instructor/ipc-a-610-cit-recertification/
) certification and recertification. Instructors will obtain the knowledge to: Interpret the differences between Class 1, 2, and 3 products Reference the IPC-A-610 standard to make accept/reject decisions Proficiently conduct CIS training courses per IPC requirements Correctly
| https://www.wesource.com/test-and-measurement-equipment/advantech-industrial-computer-610-ipc-610mb-250-id-700946-3/23/
! Newsletter Email Address: Click here to unsubscribe Advantech Industrial Computer 610 IPC-610MB-250 ID_700946 (3/23) Home > Test and Measurement Equipment Click to enlarge More images Advantech Industrial Computer 610 IPC-610MB-250 ID_700946 (3/23
IPC is the trade association for the printed wiring board and electronics assembly industries.
Training Provider / Events Organizer / Association / Non-Profit
3000 Lakeside Drive, 309 S
Bannockburn, IL USA
Phone: 847-615-7100
