Electronics Forum | Thu Jan 22 10:21:46 EST 2015 | charliedci
I am curious to know how others are providing N2 for their lead free selective soldering process. If you are utilizing a nitrogen generator, is it a PSA type or Membrane type? I am trying to get a handle on nitrogen purity and what purity is necessar
Electronics Forum | Thu Jan 22 13:01:14 EST 2015 | dyoungquist
We are using a nitrogen generator (with a N2 storage tank) that feeds 1 selective solder machine. I do not know which type of generator it is. The N2 generator has an oxygen analyzer on it. The selective solder manufacturer recommends a N2 purity
Industry News | 2021-06-30 04:28:57.0
Increases process capacity for large PCB panels by more than 54% with only 2% increase in footprint
Industry News | 2013-01-19 07:46:16.0
Information that inspires innovation is center-stage for design, printed boards, electronics assembly, test and printed electronics
Technical Library | 2021-09-29 13:35:21.0
In PCB circuit assemblies the trend is moving to more SMD components with finer pitch connections. The majority of the assemblies still have a small amount of through hole (THT) components. Some of them can't withstand high reflow temperatures, while others are there because of their mechanical robustness. In automotive applications these THT components are also present. Many products for cars, including steering units, radio and navigation, and air compressors also use THT technology to connect board-to-board, PCB's to metal shields or housings out of plastic or even aluminium. This is not a simple 2D plain soldering technology, as it requires handling, efficient thermal heating and handling of heavy (up to 10 kg) parts. Soldering technology becomes more 3D where connections have to be made on different levels. For this technology robots using solder wire fail because of the spattering of the flux in the wires and the long cycle time. In wave soldering using pallets the wave height is limited and pin in paste reflow is only a 2D application with space limitations. Selective soldering using dedicated plates with nozzles on the solder area is the preferred way to make these connections. All joints can be soldered in one dip resulting in short cycle times. Additional soldering on a small select nozzle can make the system even more flexible. The soldering can only be successful when there is enough thermal heat in the assembly before the solder touches the board. A forced convection preheat is a must for many applications to bring enough heat into the metal and board materials. The challenge in a dip soldering process is to get a sufficient hole fill without bridging and minimize the number of solder balls. A new cover was designed to improve the nitrogen environment. Reducing oxygen levels benefits the wetting, but increases the risk for solder balling. Previous investigations showed that solder balling can be minimized by selecting proper materials for solder resist and flux.
Technical Library | 2023-11-14 19:24:08.0
In PCB circuit assemblies the trend is moving to more SMD components with finer pitch connections. The majority of the assemblies still have a small amount of through hole (THT) components. Some of them can't withstand high reflow temperatures, while others are there because of their mechanical robustness. In automotive applications these THT components are also present. Many products for cars, including steering units, radio and navigation, and air compressors also use THT technology to connect board-to-board, PCB's to metal shields or housings out of plastic or even aluminium. This is not a simple 2D plain soldering technology, as it requires handling, efficient thermal heating and handling of heavy (up to 10 kg) parts. Soldering technology becomes more 3D where connections have to be made on different levels. For this technology robots using solder wire fail because of the spattering of the flux in the wires and the long cycle time. In wave soldering using pallets the wave height is limited and pin in paste reflow is only a 2D application with space limitations.
Malaysia Reflow soldering in a nitrogen atmospher
Hot Nitrogen For Wave Soldering SMTnet Express July 5, 2012, Subscribers: 25307, Members: Companies: 8910, Users: 33309 Hot Nitrogen For Wave Soldering First published in the 2012 IPC APEX EXPO technical conference proceedings. by: Laurent
| https://www.smtfactory.com/High-End-SMT-PCB-Nitrogen-Reflow-Soldering-Oven-pd45055464.html
: Leading SMT Supplier in China; Trade assurance to USD 560,000+; Professional after-sales service team. High End SMT PCB Nitrogen Reflow Soldering Oven High-end reflow oven, high-quality nitrogen reflow soldering oven, high-end CBS SMD reflow oven, for SMT PCBA production line
| http://www.szhonreal.com/productview.asp?id=64
. Offline model machine, in same XYZ motion table combine selective fluxing and soldering, compact & full function. 2. High soldering quality. 3
