Electronics Forum | Thu Aug 30 11:59:00 EDT 2001 | Spanky
Hey all, I have 3 questions about reflow. Hopefully someone can help me. 1. I am having a problem. I set the peak at 230 and my mole thermocouples are telling me the temp in that zone gets to 237. How is this possible even if the thermocouple
Electronics Forum | Thu Aug 30 13:22:47 EDT 2001 | arzu
180deg More important are the preheat and soakzones and temp ramps. How to check: I used to do it as follows: use a TEST-PCB with fixed thermocouples and connect it to the mole. Print the profile on transparant paper. do it again e.g. each week and
Electronics Forum | Wed Sep 27 15:57:33 EDT 2006 | SWAG
I wanted to post resolution on a reflow oven problem we had but can't seem to search out the old thread. So, this is new but old. Our OmniFlo 7 conveyor was stopping every once and a while and the speed indicator on screen said 1000+ ipm. We cle
Electronics Forum | Wed Aug 01 11:26:13 EDT 2012 | davemac62
Looking for a manual for Elecrovert Omniflo 7 Reflow Oven. Anyone got an extra copy? Mine seems to have walked off :O/
Electronics Forum | Mon Jan 15 13:49:09 EST 2007 | leemeyer
Hello all, I am having some trouble with the conveyor speed on an Omniflow 7 reflow oven. Recent profiling showed that the conveyor was running to slow so I calibrated the speed using the instructions in the manual. After calibration there was no ch
Electronics Forum | Wed Dec 08 17:48:18 EST 2010 | katguts69
looking for schematics for electrovert omni 7 reflow oven. manufactured in 1998. help!
Electronics Forum | Mon Jun 24 13:01:24 EDT 2013 | quaker332007
Can anyone help me with the center support on this oven? The support is rising up to high and causing the board to rock during reflow. Is the away to lower the center support?
Electronics Forum | Tue Dec 07 15:03:16 EST 2004 | Nat
Hi all, We have an Omniflow 7 reflow oven that has not come with the nitrogen option. We are looking at fitting a nitrogen system to the oven, does anyone have nay knowledge that may help us? The cost of the nitrogen is nothing as we outgas enourmou
Electronics Forum | Thu Mar 09 15:04:41 EST 2006 | geocominc
Please advice how can we reduce a delta T of 40 degres between pads with a seven zones reflow for a LF Assy. max 255 min 215 board size 3x5 inches.
Electronics Forum | Thu Mar 09 16:28:27 EST 2006 | geocominc
OMNIFLOW 7.
