Industry News | 2003-05-22 08:36:27.0
Packaging Saves PCB Board Space Without Sacrificing Power Dissipation Capability
Industry News | 2003-03-19 08:25:45.0
Pilot Program Facilitates Information Exchange Standards in Electronics Manufacturing Industry
Industry News | 2019-04-23 12:05:35.0
Speed up your wire crimp process with the right tools. Quick and Convenient Wire Crimping with this portable bench top unit . A custom 2 position die made to specifications speeds up the production process for this double barrel connector housing. The housing with 2 barrel contacts is placed into the tooling nest, and one AWG 4 wire is placed into each contact. Stepping on the pneumatic foot pedal crimps both wires and contacts at the same time.
Industry News | 2019-09-06 14:46:04.0
THREE BLADE CHOICES FOR SINGULATING RECTANGULAR TAB ROUTED PCBS CLEANLY SINGULATE STANDARD AND FLEX CIRCUIT PANELS WITHOUT DUST Cleanly
Industry News | 2017-01-13 13:44:13.0
Visit booth 410 at Apex 2017 to see the K5000 singulate multiple pre-scored PCB panels in one pass. Panels up to 10.4" wide can be separated by placing onto an input conveyor to be passed onto the separator blades. This is the ideal system for high volume in-line singulation of LED lighting strips
Industry News | 2021-09-08 15:44:35.0
Singulating low volume tab routed PCBs to strict military specifications requires the right tool for the job. Now, with the benchtop PCB depaneling router from FKN Systek, applications requiring routing rather than punching are easily taken care of. This machine is also useful as a backup to high-speed programmable routers for short runs, and for separating thick back planes which cannot be singulated by other means.
Industry News | 2017-01-25 16:39:34.0
Singulating tab routed printed circuit cards in low to medium volume production quantities is safe and easy with the N100 Nibbler from FKN Systek. Blades are available in standard thicknesses of .120”, .093” and .062”. Custom sizes to match the width of the routed section can be ground. Tabs are cut cleanly on each side so that no further clean up is required to remove excess material, as is often the case when using hand tools or when breaking the panels manually. In addition, since only one tab is cut at a time, minimal stress is imparted to the board during the process as the panel is not pressed between two points during the cut.
Industry News | 2022-05-27 14:39:40.0
From revolutionary advancements in electrical wire processing technology displayed on the show floor to expert insights conveyed in reimagined training and educational offerings, the Electrical Wire Processing Technology Expo (EWPTE), provided expanded networking and increased access to industry solutions that helped 2,574 attendees address business challenges and prepare for the future. The 2022 event was produced for the first time by the Wiring Harness Manufacturer's Association (WHMA), IPC and the Wisconsin Center.
Industry News | 2013-06-14 17:52:56.0
Engineered Material Systems, Inc., introduces NR-2500 Liquid Negative Photoresist for use in micro-electromechanical systems (MEMS).
Industry News | 2014-01-30 17:35:39.0
Manncorp has recently reconfigured and expanded its exclusive selection of SMT turnkey packages, including stencil printers, pick and place machines, and reflow ovens, to accommodate a wider range of production levels and budgets. Among the ten different turnkeys presented on their website at www.manncorp.com/turnkeys is the new 2500-MV package. Priced at only $46,995, the 2500-MV is designed for companies with a limited budget and minimal floor space who need short-run, in-house production capability for ultra-precise, high component-mix SMT assembly.
