Industry Directory | Manufacturer
Design, manufacture and support of high performance gas generators for analytical laboratories
PeakMassager is a leading massager manufacturer,focused on neck and shoulder massager,neck and back massager,waist,foot massager etc,health care equipment,providing OEM OEM production and online sale service.
New Equipment | Wave Soldering
Peak series soldering machine shows superiority in performance, stability, reliability, safety, operability and maintainability. Aims to reduce customer operational cost (especially reduced the solder dross and oxidation significantly) and improves s
Electronics Forum | Wed May 28 07:44:28 EDT 2008 | rgduval
Hi, AJ, In general, the peak PCB temperature is variable depending on the profile used. We try to keep our peak temperatures in line with the paste manufacturers recommended temperatures; ignoring the peak temps for the PCBs. For the peak temps yo
Electronics Forum | Thu Oct 19 09:45:06 EDT 2006 | slthomas
If you're talking about practical application who knows? If you're talking about liability I think you're going to lose. Most of the parts that I've had to look closely at had a peak AND a "time at" maximum. If they spec. 220 as the peak and you exc
Used SMT Equipment | Soldering - Reflow
Come from production Good condition Quattro Peak S N2 Y/M: 2008 Max PCB Size: x*510 Center Pin Support Normal 0 21 false false false HU X-NONE X-NONE Mic
Used SMT Equipment | Soldering - Reflow
REHM VXS Nitro 4550 (Type 945) Oven Serial Nr.: 3439 Year of Manufacture: 2013 Direction: Left to Right Transfer height: 900mm (+/- 75mm) Process Chamber Heating: Length: 4550mm Qty of preheating zones: 9 Length of preheating zone: 3150mm Qty of pea
Industry News | 2003-03-26 08:25:40.0
The QVE00033 transmissive switch's small size, surface mount package and performance make it ideal for noncontact switching applications in disk drives, card detectors, mise and trackballs.
Industry News | 2003-02-24 09:32:24.0
Now available with an easy-to-use dispensing gun, Electrolube TCR is a single-component, highly thermally conductive RTV sealant.
Parts & Supplies | Assembly Accessories
Detailed Product Description Features: 7 Channel Brand: KIC Part Name: X5 Reflow Profiler Model: X5 Condition: Original New Leadtime: 7days KIC X5 Thermal Profiler with SPC software and RF capability For Reflow Track More Data Points With 7,
Parts & Supplies | Soldering - Reflow
Manufacturer: Rehm Typer: V8 Nitro 3.8 Vintage: 2002 Serial number: 1009 Condition and equipment We have this unit as backup machine, haven't used for a while. 7 zones (5 pre-heat, 2 peak + cooling zone) Transport rail refurbish
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Technical Library | 2010-04-29 21:40:37.0
The purpose of this paper is to investigate the effects of reflow time, reflow peak temperature, thermal shock and thermal aging on the intermetallic compound (IMC) thickness for Sn3.0Ag0.5Cu (SAC305) soldered joints.
Lyra Reflow Oven is a soft soldering that realizes the mechanical and electrical connection between the solder ends of surface mount components or the pins and the printed board pads by remelting the solder paste pre-distributed on the printed board
Panasonic NPM-D3 Modular SMT Placement If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included allof our products. Pick and place machine, SMT pick and place machine, P
Career Center | South Windsor, Connecticut USA | Engineering,Maintenance,Production,Technical Support
Posting: JK-NVPMT TITLE: Production Equipment Maintenance Technician SUMMARY: Provide maintenance services for production equipment used in electronic assembly manufacturing. Equipment to be maintained includes SMT placement machines, through hole
Career Center | Lumberton, New Jersey USA | Engineering
Reports to: Cad/Laser Manager Department: Cad Location: Lumberton Phone: 609-261-2670 Ask for Greg Starrett Email: Send resume as a word document or PDF to greg@metassocs.com Job Summary: Under the general supervision of the Cad Manager
Career Center | Bangalore, India | Engineering,Management,Production,Quality Control,Technical Support
WORK EXPERIENCE DETAILS: 7+ Years of Experience in manufacturing & hardware testing of Protocol conveter & Commissioning, Products delivery and QA/QC. 2+ Years of Experience in Hardware testing and Package Level testing. 2+ Years of Experience in
| https://www.smtfactory.com/March-Peak-Purchase-Season-of-SMT-Machine-2023-id44034837.html
March Peak Purchase Season of SMT Machine 2023 - I.C.T SMT Machine English Bahasa indonesia Сербия Česky Dansk Deutsch Español Français Hrvatski Italiano magyar Nederlands Polski
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2018/07/pan_APEX06.pdf
) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied
