Electronics Forum | Thu Aug 27 12:49:20 EDT 1998 | Frank S.
Where can I find a good tool to splice 8mm and 12mm paper and plastic part carrier tapes together?
Electronics Forum | Thu Aug 27 13:55:09 EDT 1998 | Dave F
| Where can I find a good tool to splice 8mm and 12mm paper and plastic part carrier tapes together? Frank: Check the archives for Tesa and Siemens. Dave F
Electronics Forum | Thu Aug 27 13:56:27 EDT 1998 | Stefan Witte
| Where can I find a good tool to splice 8mm and 12mm paper and plastic part carrier tapes together? Siemens has a pretty good splice tool, which crimps a small brass strip into the tape. The cover tape has to be sticked together with a small strip o
Electronics Forum | Fri Aug 18 09:02:49 EDT 2006 | russ
PBGA is Plastic Ball Grid Array. Russ
Electronics Forum | Tue Mar 30 10:43:21 EST 2004 | Robert
I could use some help too. I have a bunch of SMD 4 Pads Inductors from Central Technologies. The dimensions of the part is 11.30x13.9x6.9 . I've called four companies already and none were able to find a carrier for this part. These parts are on plas
Electronics Forum | Fri Jul 15 08:20:44 EDT 2005 | stepheniii
And why do you want to control the process? To prevent defects, I would think. Actually orginally the way I first saw SPC was to reduce inspection. If you are using SPC for plating thickness, you don't have to measure every piece to be confident the
Electronics Forum | Mon Mar 13 05:29:08 EST 2006 | hitechsc
Hi just to clear a few things, We produce the nozzles and the parts are manufactured in two stages, CIM and plastic injection moulded, we designed the rear end of the ceramic tip with spikes so when the secondary operation on plastic over mould the p
Electronics Forum | Fri Mar 11 18:30:50 EST 2005 | davef
Russ: In December 2003, the European Commission released the following statement: �The commission services have prepared a draft Commission decision establishing maximum concentration values pursuant to Article5(1)(a) of Directive 2002/95/EC. The pr
Electronics Forum | Wed Mar 20 15:25:05 EST 2002 | angiewest
Looking for a company to recycle plastic reel and I.C. tubes. I already recycle trays with Smart Cycle (formally Semicyle). I hate to throw that stuff away. The local recycling places only recycle plastic 1 and 2. Most of the reels are 3's.
Electronics Forum | Fri Oct 14 12:03:32 EDT 2011 | fborja3
I want to start an assembly that may require use of SMT machines such as SMT assembly, bond wire, Xray and PCB fabricator machines. I apologize I am not to savvy with the technical names such as the above but I just want something not to costly or e
.gif)
