Electronics Forum | Thu May 05 20:08:59 EDT 2005 | Gene
We have My12 machines. The precision is 25mic. There is no problem with the accuracy. I assembled components 0201, QFN 20mils pitch /12 mils aperture, 0402 flip chips. Even if you have troubles with the video codes definition, mechanical centering co
Electronics Forum | Thu May 19 03:43:31 EDT 2005 | grantp
Hi, If you mechanically center, then you cannot use the HYDRA head, so you only place one 0201 at a time. That's not a great solution, so you need the MYDATA to be stable with vision. I think whichever machine has better vision would be the choice.
Electronics Forum | Mon Aug 17 15:59:48 EDT 2020 | cyber_wolf
Calibration was done improperly or you have a bent mount tool.
Electronics Forum | Mon Aug 17 11:35:57 EDT 2020 | artem
Hello, I have some troubles with my MyData TP11-UFP with the precision of the placement. All the parts which are mechanically centered are slightly misaligned. Attached are some pictures of 0603 and a SOT23 part. I have made the calibration but it
Electronics Forum | Fri Nov 20 09:32:35 EST 2020 | artem
Hello, I have fixed the issues with the centering. Below the centering head there is a adjustment screw. First you have to remote a few screws to get access to it. They you can turn the adjustment screw to align the centering jaws.
Electronics Forum | Mon Aug 17 17:01:31 EDT 2020 | rgduval
+1 to what Sr. Tech said. I'd also add that you could have some uneven deterioration of the centering jaws. Check by doing a couple of things (this will help check if the tool/tip is bent/deteriorated as well): 1. Turn off mechanical centering, and
Electronics Forum | Wed Nov 13 15:05:48 EST 2013 | jimmyboz
With what machine? I cannot help until that is disclosed.
Electronics Forum | Tue Nov 12 17:11:32 EST 2013 | mondalaci
Hi Folks, I'm working on a LED display that is composed of multiple layers. What is interesting for the point of this discussion is the PCB layer and the light deflector layer on top of it. Please take a look at the related pictures at http://plus
Electronics Forum | Wed Nov 13 15:33:08 EST 2013 | mondalaci
Good question :) I'd say with a machine that is available for an average pick and place operator nowadays. Our manufacturer is not fixed yet, that's why I don't have any specific. On a related note I'm wondering whether the machine is so importan
Electronics Forum | Wed Nov 13 16:48:19 EST 2013 | spoiltforchoice
I would expect any half decent machine to place 0603 parts slap bang on target to the typical defined accuracy for such parts on most machines of perhaps ~60 microns or better. Self correction during reflow is IMHO much less pronounced with lead-free
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
1750 Mitchell Ave.
Oroville, CA USA
Phone: (888) 406-2830