Electronics Forum | Mon Jan 28 16:48:14 EST 2002 | djarvis
Printing with adhesives is no big deal so don't let the sales types try to mystify the process and convince you that they have the only stencils/adhesives/knowledge that can possibly get you through this "trying time" - at a price. Start with 0.010"
Electronics Forum | Tue Mar 20 10:27:36 EDT 2007 | davef
Print styles: Print - Most common print mode * A single print stroke forward on first board * A single print stroke reverse on next board Print-Print (Double Print) * Both forward and reverse printing strokes * Helps to ensure complete filling of th
Electronics Forum | Sat Aug 07 11:10:03 EDT 1999 | JohnW
| Could someone give recommendation on the stencil opening for printing epoxy on HAL FR4 PCB for 0805 and 0603 size chips capacitors and resisitors. | My regular stencil manufacturer recommend the following: | Thickness: 8 mils | 0805 opening: Oblong
Electronics Forum | Thu Dec 16 15:00:20 EST 2004 | glaucon
Simple differences. Both processes require a very similar machine platform, controlled motion, vision fiducial recognition and alignment of a substrate (PCB or hybrid ceramic) to the "image", the image being either a stencil (hence stencil printing)
Electronics Forum | Fri Oct 09 06:32:38 EDT 2009 | davef
Here's what is on that post referred to, not sure what you need more than ... "* Stencil material: metal or plastic, no difference in print, metal is easier to clean, no static problem, available * Stencil thickness: Chips 0.006", SOIC 0.010" [print
Electronics Forum | Fri May 26 05:54:40 EDT 2000 | Sal
For the past year now we have been printing adhesive with no real problems. Our printing ranges from 0603's to SOIC using a variation of aperture sizes and metal thickness foils. The crucial parameters are : aperture sizes : These obviously depend o
Electronics Forum | Mon Jun 13 14:34:16 EDT 2005 | peter ng
The stencil thickness should be 5.5 mils.The squeeze speed around 20mm/s,print gap 0.15mm,print separation 0.3mm/s.
Electronics Forum | Thu Dec 16 06:06:52 EST 1999 | Stefan
Check the print gap and check the clamp edges, sometimes the clamps is damaged causing a distance between the PCB and the screen. Good luck
Electronics Forum | Tue Jun 01 07:26:55 EDT 2004 | johnwnz
Alistair, your paste deposit is controlled by a few things: Stencil thickness Squeegee pressure Squeegee speed Print gap in 99 out of 100 applications for paste printing you would have a print gap of 0 i.e. on contact printing where the PCB is in fu
Electronics Forum | Thu Mar 22 16:19:40 EST 2001 | rwilliams
In regards to SMT adhesive application by stencil: Can anyone make any recommendations for: SMT Adhesive Material itself? Squeegee Blade Material? Stencil Material? Characteristics/Features of your Stencil? E.g., thickness, aperture ratios, etc... P
