New Equipment | Education/Training
Solder Training and Solder Certification Courses Taught in Accordance With IPC Soldering Guidelines. We offer a variety of customized courses set up specifically for our customers requirements. An example would be our combination type certificate t
Terminals Harwin Terminals are useful for a variety of connection styles and location requirements. Choice of turned and blade designs. Solder and wire-wrap location points. Test points. Single male contact for use with applicable
Electronics Forum | Fri Oct 28 04:56:12 EDT 2016 | lilybell
I read a few posts here about resistor in led applications. The thing is, the resistor has clarified as this shows:was always use with a power source delivering a higher forward voltage than the led could tolerate(ex: a 9volt battery hook up to a 3w
Electronics Forum | Tue Mar 03 02:39:56 EST 2015 | sarason
I would presume you reflow the top of the board first. Use tented vias. As you have worked out, vias have surface tension, which sucks the solder up the hole during reflow of the bottom of the board. Good luck! regards sarason
Used SMT Equipment | Pick and Place/Feeders
FEATURES ▶Higher productivity and quality with printing, placement and inspection process integration▶For larger boards and larger PCBs up to a size of 750 x 550 mm with component range up to L150 x W25 x T30 mm▶Higher area productivity through dual
Industry News | 2003-03-11 08:45:00.0
CAMtastic DXP is the latest version of Altium's complete CAM verification and editing system that bridges the gap between PCB design and manufacturing and facilitates communication between board designers, fabrication engineers, and their clients.
Industry News | 2018-10-18 08:00:40.0
SMT solder joint quality and appearance inspection process
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Technical Library | 2022-04-29 00:49:12.0
Tools: soldering iron, soldering iron stand, wet sponge, tweezers, rosin, solder, absorbent cotton, 95% alcohol, chip resistors, capacitors, circuit boards, 220V power supply..... http://www.leadersmt.com/gen2/1028113523/?mod=file&col_key=download
https://www.ascen.ltd/Products/Solder_paste_printer/513.html full auto PCB screen printer and SMT solder paste printing machine with Image and optical system,It is a very accurate fully automatic SMT stencil printer.automatic PCB screen printer main
https://www.ascen.ltd/Products/Solder_paste_printer/513.html full auto PCB screen printer and SMT solder paste printing machine with Image and optical system,It is a very accurate fully automatic SMT stencil printer.automatic PCB screen printer main
Training Courses | | | PCB Inspection Courses
The PCB inspection courses focus on improving PCB yield and reliability through validation and detection of defects on electronics assemblies.
Bridging at Reflow, What is the Cause and Can it be Eliminated? SMTnet Express April 12, 2012, Subscribers: 25060, Members: Companies: 8851, Users: 32937 Bridging at Reflow, What is the Cause and Can it be Eliminated? by: Robert Dervaes, V
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/select/technologies-or-options/debridging-knife
4.0 Software Infrared Preheating Board Warp Compensation Auto Solder Nozzle Tinning Bullet and Mini-Wave Solder Nozzle Dual Solder Nozzles 75 mm Wave Nozzle Solder Pot Service Cart De-bridging Knife
Heller Industries Inc. | https://hellerindustries.com/parts/7001k/
? Reflow Soldering Problems Overview Causes & Defects – Reflow Soldering Solder Ball Defects Opensor Insufficient Solder Wicking Defects Tombstoning PCB Soldering PCB Bridging Defects PCB Dewetting PCB Nonwetting Circuit Board Voids PCB Delamination