Industry Directory | Consultant / Service Provider / Equipment Dealer / Broker / Auctions / Manufacturer's Representative / Training Provider
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Small firm with excellent smt line set up for manufacturing proto type as well as high volume production
The CF-9 Radial Lead Former forms and cuts 2- and 3-leaded taped radial components such as TO-92s, capacitors, transistors, LEDs, etc. - precisely and repeatedly, in standard and special forms. This machine is capable of forming and cutting up to 25
Retrofit existing system with Innovative Dispensing Technology for Excellent Dispense Control and Repeatability Advanced pump technologies available for retrofitting include: True Volumetric Pump, Precision Auger Pump, Simplified Jetting Pump and Ti
Electronics Forum | Mon Dec 20 12:42:15 EST 1999 | Charlie
There is a need to set up the spray fluxer on our wave machine. I'm looking for guidelines and comments form others who have done this set up. Also, is there any rule of thumb at visual inspection when there is too much or not enough flux being appli
Electronics Forum | Wed Feb 27 08:31:02 EST 2013 | anton99
We are a OEM and growing pretty fast. The like the idea of setting up common components on the machine. It makes sense from a set up perspective. All of our set up is off line but the set up usually lasts longer than the SMT run so we have some spora
Used SMT Equipment | Soldering - Reflow
1996 Vitronics Unitherm 520A Reflow Oven Features: 5 Heat Zones Top and Bottom / 2 Cool Zones o Edge and Mesh o Set up for Air - Nitrogen Capable o 220v 3 phase 105 amp o 12’ x 5’ Footprint
Used SMT Equipment | AOI / Automated Optical Inspection
Capture on the fly technology 3D Fusion Lighting (RGB+White LED's) 5 megapixel color imaging 2 top-down and 4 side angle cameras Quick set-up High speed, high defect coverage Low false failure rate Programmable conveyor for boards up to 20 x 2
Industry News | 2021-11-08 14:38:39.0
Heller Industries, a leading supplier of reflow soldering ovens for electronic manufacturing and pressure curing ovens for back-end semicondutor manufacturing, today announced they will be exhibiting their new MK7 reflow oven at the San Diego Conference Center January 25-27, 2022.
Industry News | 2017-07-10 17:31:47.0
GPD Global is in the process of setting up a demonstration center on the East coast of the United States. Rapid Coatings, located in Woburn Massachusetts, will be the East coast demo coating center. A GPD Global conformal coating system (SimpleCoat) configured with spray, precision dispense, and volumetric progressive cavity displacement technology will be used for Rapid Coatings production and customer demonstration.
Parts & Supplies | Pick and Place/Feeders
Panasonic CM202 Feeder Set up Jig / Feed Specs: PANASONIC CM202 Feeder Set up Jig / Feeder Loading Unit, can load 2 pieces of feeders.
Parts & Supplies | Pick and Place/Feeders
Sanyo Feeder Set up Jig / Feeder Loa Specs: SANYO Feeder Set up Jig / Feeder Loading Unit Size: L350*W260*H150(MM) G.W: 12KG Can load 2 pieces of feeders
Technical Library | 2018-04-27 13:23:31.0
When performing BGA component rework, it is important to know the actual heat that is coming out of the top and bottom heaters. This will be critical in setting up accurate heat profiles. Monitoring your heat output will also keep you aware of your heaters performance so that you will know when the heaters need to be replaced.
Technical Library | 2019-07-05 09:33:05.0
Fourier Transform Infrared (FTIR) spectroscopy exists as one of the most powerful techniques for chemical identification and the most practical for “first step” analysis. Analytical instrumentation such as GC-MS and LC-MS are commonly used for identifying organic compounds. However, these techniques are costly and often require extensive set up time, method development, and sample alteration. Reliance upon FTIR as a robust and versatile tool can be based on its attributes of simplicity, speed, sensitivity, and affordability.
The CF-9 Radial Lead Former forms and cuts 2- and 3-leaded taped radial components such as TO-92s, capacitors, transistors, LEDs, etc. - precisely and repeatedly, in standard and special forms. This machine is capable of forming and cutting up to 25
http://www.gpd-global.com No drip no drool across a wide range of fluid viscosities (low-to-mid and low-to-high). No manual adjustment to compensate for pump variability. Truly Volumetric PCD Pumps for total control of dispensing fluids. Ability to
Training Courses | | | PCB Rework and Hand Soldering Courses
The PCB rework and hand soldering courses courses cover techniques of rework and repair of PCBs, BGAs and other electronics assemblies, and teach fundamentals of soldering of electronics assemblies.
Training Courses | | | Other Courses
Other courses related to electronics manufacturing and assembly
Events Calendar | Mon Jun 08 00:00:00 EDT 2020 - Mon Jun 08 00:00:00 EDT 2020 | ,
Practical Set-Up, Qualification of Cleaning Process in PCB Assembly
Events Calendar | Tue Feb 19 00:00:00 EST 2019 - Tue Feb 19 00:00:00 EST 2019 | ,
Webinar: BGA Reballing - Theory and Hands On
Career Center | Portland, Maine USA | Sales/Marketing
Beau Tech, a manufacturer of hand tools for the electronics industry and hobby market is seeking a Sales Representative in Europe. Responsibilities include: Set up distributors in the European market. Promote product line through trade shows, etc.
Career Center | Fremont, California USA | Production
SMT Operator Duties include machine set up and load, parts value verification, screen printing, hand loading, reflowing. Operator is responsible for aligning and hand placing parts on boards and working the reflow oven. Performs basic machine set up
Career Center | Bronx, New York USA | Production,Technical Support
90% of my working experiences, are related with SMT environment: I been dealing with a lot different situation for the last 16 + years. I'm a handyman person as well. know to handle power and precision, etc. For the last year and a half I been in cha
Career Center | ORLANDO, Florida USA | Engineering,Maintenance,Production,Technical Support
Manufacturing tech/eng for a contract manufacture for 10+ years. Been working in the SMT industry for a total of 20yrs. Have done everything from operator to process work. Most familiar with Assembleon, MPM, DEK, BTU,Electrovert, SLIM-KIC, SUPER-MOLE
Heller Industries Inc. | https://hellerindustries.com/heller/vacuum-profile-reflow/
How To Set Up Vacuum Assisted Reflow Profile Home » Heller Blog » Tips for Setting Up an Optimized Vacuum Profile when Using Vacuum Assisted Reflow Tips for Setting Up an Optimized Vacuum Profile when Using Vacuum Assisted Reflow With
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/efd/blog/092519-how-to-set-up-blue-lv-barrier-pistons-for-cyanoacrylates-and-watery-fluids
How to Set Up Blue LV Barrier Pistons for Cyanoacrylates and Watery Fluids Nordson EFD Corporate | Global Directory | Languages Division Only All of Nordson Home Products Accessories
