Electronics Forum | Fri Oct 09 04:51:49 EDT 2015 | amrsalama
Thanks NRS, yes UIMC by mistake was in incorrect slot (11) once we moved it to slot 12 it works, thanks again.
Electronics Forum | Thu Jul 30 22:48:17 EDT 2020 | dekhead
MM (MultiMove) cards are in the M19, Motor Control, crate (located front of machine, right side). MM's are the larger cards located on the far right side; X11, X12 and X13 slots (X11 slot is only used in Infinity, empty slot on Horizon / ELA).
Electronics Forum | Tue Oct 06 20:18:27 EDT 2015 | edwaterfall01
With the address of FC107F24 I would look at the Slot 11 UIMC board. Try swapping with another Radisys Board. Check jumpers, changing one jumper only on each board.
Electronics Forum | Mon Aug 13 14:11:14 EDT 2007 | jeffharley
Slot 11 in the I/O box is the one for B.E.C. pcb, the offset is 2125 in the x and 500 in the y axis. The template for the B.E.C. is triangle in shape and is the length from corner to corner on the rotary table. You can also type in sh sys and look to
Electronics Forum | Wed Feb 05 11:39:23 EST 2014 | escalador
Hi, I have an old GSM1 p&p machine unused for some time and I would like to know if someone can give me the correct jumper settings for the 3 Radisys UIMC axis control cards that go on slots 10,11 and 12.Someone modified card positions and I dont kno
Electronics Forum | Thu Sep 14 11:15:15 EDT 2000 | Graeme
I also have and run a FGL1 I checked the rack in our machine and there are nine slots numbered left to right slot 1 VM1110TA,slots 2,3,and 4 none slot 5 VM1520, slot 6 VM1510, slot 7 VM1530, slots 8 and 9 none.Have you tried Astro Technology ltd Tel
Electronics Forum | Thu Sep 14 11:15:34 EDT 2000 | Graeme
I also have and run a FGL1 I checked the rack in our machine and there are nine slots numbered left to right slot 1 VM1110TA,slots 2,3,and 4 none slot 5 VM1520, slot 6 VM1510, slot 7 VM1530, slots 8 and 9 none.Have you tried Astro Technology ltd Tel
Electronics Forum | Sat Nov 20 02:06:51 EST 2010 | kiss
Next Parts:1, Slot#8 -> Next Parts:2, Slot#9 -> Next Parts:3. This represents use parts located in slot#7 first, slot#8 second, and slot#9 third. I hope this clears it up for you, purchase FLEXA when you have enough money.
Electronics Forum | Sun Mar 06 11:04:19 EST 2005 | jsk
Slot three will not recognize magazine. LED's are lit (green)when inserted into slot three. Magazine works in all other slots. Tried multiple magazines. All gave the same error. Error code = E-MIPR-1 unknown magazine type slot 3 No visible damage t
Electronics Forum | Thu Nov 26 00:34:30 EST 1998 | Brian G.
Certain board designs require the unavoidable use of non-plated holes and slots. Presently, this requires a trip back to the drill house to open up the aforementioned holes, to remove the unwanted plating. In situations requiring non-plated holes and
