Electronics Forum | Thu Jun 08 19:51:22 EDT 2006 | grantp
Hi, That's good news, and we did outs with SN100C as well on Wed, however we are still working hard on getting a good profile. We have some large BNC connectors, and they are hard to profile. We also have wave palettes, and these might be too thick
Electronics Forum | Fri Jun 09 07:26:24 EDT 2006 | amol_kane
hi, gald to hear that yr process is working well.....we are in the process of buying a wave with SN100C solder.....any pitfalls/precautions that you took during the transition? did you do any DOE for setting up the profile values?? are you seeing a
Electronics Forum | Fri Jun 09 11:55:34 EDT 2006 | jbrower
Howdy Amol, As far as I can see, there aren't too many pitfalls with SN100C. Just make sure to keep all of your alloys seperated. The issues that I am working out right now is the profiles with our wave pallets and some of our larger components. We
Electronics Forum | Thu Jun 08 16:03:52 EDT 2006 | jbrower
On Saturday the 3rd, I offloaded nearly 1200 pounds of solder from my Electrovert, did the tin purge and loaded nearly 1200 pounds of sn100c back into my solder pot. It was a hell of a job, but we got it done in 8 hours. We've been running with this
Electronics Forum | Wed Mar 30 17:32:55 EDT 2011 | gaz
Hi, We are using ws488 sn100c paste. Anyone have a profile for a 5 zone oven that has worked well for you?
Electronics Forum | Tue Feb 01 09:54:23 EST 2005 | jbrower
Hi Frank, we're still going to go with FR4 as our prefered material. Our board thickness is .062. We use an on shore and off shore vendor. Prototron I believe offers an immersion tin and excellence in china? offers an immersion tin finish. We fou
Electronics Forum | Tue Feb 08 15:30:18 EST 2005 | saragorcos
Jay ~ do you have any other contact information for that seminar you are attending concerning the SN100C? I have tried the URL in your message, and it is not working for me. Your help would be much appreciated, and thanks for sharing all your helpf
Electronics Forum | Tue Apr 05 12:18:25 EDT 2011 | gaz
That's very helpful, and much appreciated. I know it's a long shot, but I don't suppose you know what paste they are using with these settings. I am testing with sn100c ws488. Thanks! kinos
Electronics Forum | Tue Feb 01 09:21:36 EST 2005 | TomA
I looked breafly at this alloy. My concern was that I had already implemented a SAC 305 alloy at SMT. So any of my mixed technology projects would one alloy (SAC 305) on one side (topside) and a different alloy (SN100C) on the bottomside. Most articl
Electronics Forum | Tue Feb 01 11:54:14 EST 2005 | TomA
Indy, I found the same findings as you. The claim is that the solder joint may actually look closer to a SnPb solder joint then the SAC alloys. I had commited to the SAC alloys at SMT before finding out about the SN100C alloy. I'm interested in what